BioloMix 3-in-1 Smoothie Blender

1. Important Safeguards

When using this electrical appliance, basic safety precautions should always be followed, including the following:

1. Read all instructions.
2. Before using check that the voltage indicated on the product corresponds with the voltage of your electrical outlet.
3. Do not let cord hang on hot surface or over edge of table or counter.
4. Do not operate any appliance with a damaged cord or plug or after the appliance malfunction or has been damaged in any manner.
5. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
6. Close supervision is necessary when any appliance is used by or near children.
7. Avoid contacting the moving parts.
8. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
9. The use of attachments not recommended or sold by manufacturer may cause fire, electric shock or injury.
10. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. To disconnect, turn any control to "off", then remove plug from wall outlet by grasping the plug, not the cord.
11. To reduce the risk of injury, never place blade assembly on motor unit without the jar properly attached.
12. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
13. Children should be supervised to ensure that they do not play with the appliance.
14. Do not leave the machine on unattended.
15. When removing the blender from the motor unit, wait until the blades have completely stopped.
16. Always operate blender with cover in place.
17. Always use the appliance on a secure, dry level surface.
18. Never place this appliance on or near a hot gas or an electric burner or where it could touch a heated appliance.
19. Do not use outdoors.
20. Do not use appliance for other than its intended use.
21. Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
22. Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
23. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
24. Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.
25. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

2. Product Overview & Components

The BioloMix TB003 is a versatile 3-in-1 blender designed for various kitchen tasks. It includes a main blender jar, a portable bottle, and a grinder cup.

Figure 2.1: Exploded view of the BioloMix 3-in-1 Blender Set.

Packing List:

• 1 x Blender base (Power base)
• 1 x 1.5L Glass Jar (with 4-leaf wet blades)
• 1 x Lid for glass jar
• 1 x Portable Bottle (600ml, with 4-leaf wet blades)
• 1 x Grinder Cup (100ml, with 2-flat dry blades)
• 1 x User Manual

Main Components:

Figure 2.2: Main unit components.

1. Measure cup
2. Cup cover
3. Glass Jar
4. Blade Base
5. Main unit (Power base)
6. Speed knob
7. Key (Pulse, Ice Crushing, Smoothie buttons)

3. Setup Instructions

Before Initial Use:

1. Unpack the appliance and place all parts on a horizontal surface.
2. The jar assembly (including the measure cup, lid, seal ring 1, jar unit, seal ring 2, blade assembly) is pre-assembled. Disassemble all detachable parts except the motor unit for washing. Refer to the 'Care and Cleaning' section.
3. Once all pieces have been cleaned and dried thoroughly, reassemble:
1. Invert the jar unit onto a level surface. Holding the jar handle, place seal ring 2 and the blade assembly onto the blade base bottom. Secure the blade assembly by turning it clockwise until tight.
2. Reposition the jar assembly with its opening upwards. Wrap seal ring 1 around the lid bottom and place the lid onto the jar assembly. Place the measure cup into the lid by fitting the small projection on both sides of the cup into the slots of the lid and turning the jar cover clockwise until tight.
3. Finally, place the assembled jar onto the motor unit by aligning the strip on the assembled jar bottom.

CAUTION: The jar and jar base are now secure. Do not try to twist the jar and jar base onto the motor unit.

Assembly Steps:

Figure 3.1: Visual guide for blender assembly and use.

1. Step 1: Rotate the blade assembly clockwise until it is locked securely onto the jar/bottle.
2. Step 2: Place the assembled jar/bottle onto the motor unit by aligning the strip on the assembled jar bottom with the slot on the motor unit.
3. Step 3: Place the ingredients into the mixing cup, ensuring they do not exceed the maximum fill line.

4. Operating Instructions

General Blending Steps:

1. Peel or core fruits/vegetables and cut them into small dices.
2. Place the food to be blended into the jar. Usually, purified water needs to be added to facilitate smooth blending. Do not exceed the MAX level.
3. Put the lid on the jar. Ensure the measuring cup is in place.
4. Plug the power cord into a standard wall outlet.
5. Turn the speed knob to the appropriate speed setting or select a preset program for your task.

Speed and Program Selection:

Figure 4.1: Control panel with preset programs and speed recommendations.

The blender features a speed knob (OFF, ON, MIN, MAX) and three dedicated buttons:

• Pulse: For quick bursts of power and controlled blending.
• Ice Crushing: A preset program optimized for crushing ice.
• Smoothie: A preset program for making smooth beverages.

Adjust the speed from low to high based on ingredients:

• Low Speed: Ideal for Baby Food, Sauces.
• High Speed: Ideal for Fruit & Vegetable, Smoothies & Shakes.

Food Type and Blending Guide:

Note: Never use boiling liquids or run the appliance empty.

Important Operating Tips:

• For quick or delicate blending tasks, turn the speed knob to 'P' (Pulse) position and hold for a few seconds, then release. The knob will reset to 'O' (Off) automatically. Repeat several times until desired consistency is obtained.
• To add ingredients while blending, remove the measuring cup and add through the lid opening.
• When crushing ice or hard food, keep one hand firmly on the lid.
• For best circulation, pour liquid into the jar first, then add solids.
• Tasks not efficiently performed by a blender: beating egg whites, whipping cream, mashing potatoes, grinding meat, mixing dough, extracting juice from fruit and vegetable.
• Never place the following items in the unit as they may cause damage: bones, large pieces of solid, frozen food, or tough foods such as turnips.
• To crush ice, add up to 6 ice cubes. If more ice is needed, remove the cup and add cubes one by one through the lid opening.

Operation Time Guidelines:

• Each use should not exceed 3 minutes.
• Allow at least 10 minutes of rest between two continuous cycles to let the unit cool to room temperature before the next operation.
• To stop the machine during operation, turn the knob to 'O' (Off) position anytime.

Product Demonstration Video:

5. Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel if repairs are needed.

Cleaning Steps:

1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Do not let food dry on the jar assembly as this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to MIN position for a few seconds. Then empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit. To detach the blade assembly, turn it clockwise from the jar base bottom, and remove the seal ring 2 and blade assembly. Also, detach the jar cover seal ring 1 from the jar cover.
5. Rinse the measuring cup, lid, sealing ring 1, jar unit, sealing ring 2, and blade assembly by hand or dry them. The temperature setting must not exceed 65°C.
6. Brush the blade clean using warm soapy water, then rinse thoroughly under the tap. Do not touch the sharp blades; handle carefully. Do not immerse the blade assembly in water. Leave to dry upside down away from children.
7. Wipe the motor unit with a damp cloth and dry thoroughly. Remove stubborn spots by rubbing with non-abrasive cleaner. If liquids spill into the motor unit, first unplug the unit, then wipe with a damp cloth and dry thoroughly.

Important Cleaning Notes:

• Do not immerse the motor unit in liquid to prevent the risk of electric shock.
• Do not use rough scouring pads or cleansers on parts or finish.
• Lid, glass jar, blades and jar collar are dishwasher safe for easy cleanup.

Figure 5.1: Blender parts are dishwasher safe for easy cleaning.

6. Troubleshooting

If you encounter issues with your BioloMix blender, please check the following common problems and solutions:

• Blender does not turn on: Ensure the unit is properly plugged into a working outlet. Check that the jar is correctly assembled and securely placed on the motor unit. The lid must also be properly closed.
• Ingredients are not blending smoothly: Add more liquid if the mixture is too thick. Cut ingredients into smaller pieces. Do not overload the blender; process in smaller batches if necessary. Use the Pulse function for stubborn ingredients.
• Blender is noisy or vibrating excessively: Ensure the blender is on a stable, flat surface. Check that all parts (jar, blade assembly, lid) are securely fastened. Reduce the amount of ingredients if overloaded. Some noise is normal during high-speed operation.
• Leakage from the jar: Ensure the seal ring is correctly placed and not damaged. Make sure the blade assembly is tightly screwed onto the jar. Do not overfill the jar beyond the MAX line.
• Motor stops during operation: The blender may have overheated. Unplug the unit and let it cool down for at least 10-15 minutes before attempting to use it again. Reduce the load or blending time.

If the problem persists after trying these solutions, please contact customer support.

7. Specifications

Figure 7.1: Product specifications and dimensions.

8. User Tips

• Noise Level: The blender operates with a powerful motor (1300W, 28000 RPM), which can generate some noise, especially during high-speed blending or ice crushing. This is normal for high-performance blenders. Ensure the unit is on a stable surface to minimize vibration.
• Optimal Blending: For best results, always add liquids first, then soft ingredients, and finally harder ingredients or ice. This helps the blades move freely and creates a vortex for efficient blending.
• Grinding Dry Goods: When using the grinder cup for coffee beans or spices, ensure the ingredients are completely dry to prevent clumping and ensure an even grind.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.