BioloMix T6100 Professional High-Speed Blender

1. Product Notes & Safety Precautions

Note: For first time use, the machine should be filled with water to the maximum water level mark, boiled, poured out, rinsed with clean water, once or twice, to remove any dust that may be generated during the production and storage process.

When you use this product, please pay special attention to the following. Please read the 'Safety Precautions' carefully before use and use it in the correct way to avoid damage or danger caused by improper use.

Please read the body of the instruction manual after understanding the contents of this section and keep it in a safe place after reading it so that it can be readily accessible to all users of this product.

1. Before using this product, make sure the voltage is the same as the voltage on the name-plate.
2. Do not wipe the plug with a wet cloth and do not insert or remove the plug when your hands are wet; this may cause electric shock.
3. Before switching on the product, check whether the power cord plug is fully inserted into the socket, not fully inserted into the socket is likely to cause heat and cause a fire.
4. Do not place the product next to heat sources, such as ovens, microwave ovens, etc.
5. Do not put this product into water or other liquids. This may cause a short circuit or electric shock.
6. If the power supply cord is damaged, it must be replaced with a special cord or a special component purchased from the manufacturer or service department.
7. This product is not intended to be operated by children or by physically or mentally handicapped or inexperienced persons, and should not be used, touched, or played with by children unless they are supervised or instructed by a person responsible for their safety. Do not leave the appliance unattended while it is in use.
8. This product is intended for home use only and should not be used for commercial or industrial purposes.
9. This machine uses high-speed motor, crushing intermittent fast and slow sound is normal.
10. Do not put your hands or any utensils, metal, foreign objects, etc. into the mixing cup to avoid injury or damage to the apparatus.
11. When using this product, the water or other liquids in the mixing cup should not exceed the maximum water level scale marked on the cup.
12. When the machine is in use, please do not place the machine close to the heat source; do not place rags or other objects underneath the machine, so as not to obstruct the air inlet and outlet channels, resulting in poor heat dissipation. The temperature protector in the motor is activated at this time, it is not a fault of the machine, you need to unplug the power supply and use the machine after it cools down.
13. When the machine is in operation and the liquid in the mixing cup is boiling, please be careful of hot water spouting out of the lid from the water vapour and do not remove the lid.
14. When the machine is not in use, it must be unplugged and cleaned.
15. The blades of the product are very sharp, please do not touch, be careful when cleaning, do not remove the blades or touch any part of the running parts.
16. Do not perform any operation not described in this manual, do not disassemble, repair or modify the product without authorisation to avoid injury to yourself and damage to the product; if there is any problem with the product, please contact us or go to a professional technician for repair.

2. Product Structure Diagram

• Small cup lid: Covers the opening of the main lid.
• Lid open lid: The main lid of the stirring cup.
• Stirring cup: The 2.6L BPA-free jar for blending.
• Host: The main motor unit and base of the blender.
• Control panel: Features function buttons, pulse, ON/OFF, and speed control knob.
• Shock-proof foot mat: Located at the base for stability and vibration reduction.

3. Product Specifications

4. Operating Procedures

1. Click on the 'start/cancel' button; the function menu light will illuminate.
2. Click on the function menu (all function menus are touch-sensitive) to select the desired function. The icon of the selected function will flash (other function lights remain on).
• The icon of the selected function will flash (other function lights remain on). After selecting the function, press the 'Start/Cancel' key to enter the work mode, and the selected function light will be solid on.
• Alternatively, after selecting the function, press the 'Start/Cancel' button to enter the working mode, the selected function light will be solid on (other function lights will be off). If the 'Start/Cancel' key is not pressed within 30 seconds, the blender will return to standby mode.
• If you do not press the 'Start/Cancel' key within 30 seconds, it will return to standby mode.
3. To use the Pulse function, press and hold the Pulse button. The machine will instantly reach its highest speed, crushing ingredients immediately. Continue holding the button to blend, and release it to stop operation immediately.

The 7 preset programs include: Juice, Nut Milk, Smoothies, Ice Crush, Milkshake, Hot Soups, and Grains. A DIY option is also available for custom blending.

5. Blending Guidelines & Ingredient Portions

6. Care and Maintenance

Cleaning Demonstration

1. When cleaning, you must unplug the power and leave it to cool down.
2. Do not unplug the power cord when your hands are wet to avoid electric shock.
3. Do not put the product into the water for cleaning, cannot use highly corrosive cleaning agent for cleaning, and cannot use steel wire ball to wipe the inner liner of the steel cup.
4. Due to the impact of water quality, water in the heating process will naturally produce calcium carbonate, magnesium carbonate mixture, lighter floating on the water surface to form froth, heavier precipitation at the bottom of the pot to form scale. Limescale will increase the boiling time and the noise of the water. Scale can be cleaned directly with citric acid descaler, you can also use vinegar to clean up (the method is to water and vinegar at a ratio of 2:1 when such as the pot to heat, boil and leave overnight, the next day pour off the solution, and then loaded into the water to boil and clean, and then poured out can be).

Self-Cleaning Feature

The BioloMix T6100 blender features a convenient self-cleaning function. Simply add warm water and a few drops of dish soap to the jar, then press the 'Pulse' button. This will create a powerful vortex that cleans the interior of the jar and blades effectively.

7. Simple Troubleshoot

8. User Tips

• For optimal blending, ensure the lid is properly closed and aligned to prevent error codes like E2.
• If the blender stops due to overheating (E3), allow it to cool down to room temperature before attempting to use it again.
• Always adjust ingredient and water ratios as per the guidelines to achieve the best blending results and avoid issues with ingredients not breaking down.
• The blender creates a nice vortex, even at slowly increasing speeds, which helps in thorough mixing.

9. Warranty & Support

For any issues, questions, or support regarding your BioloMix T6100 Professional High-Speed Blender, please contact the distributor:

Please refer to the official user manual PDF for more detailed information and specific warranty terms. The PDF can be referenced at: BioloMix T6100 User Manual (PDF)

10. Product Video Overview