1. Introduction
Thank you for choosing the Baofeng K67 Pro Multi-band Walkie Talkie. This device is a versatile portable transceiver designed for amateur radio enthusiasts, GMRS users, and general communication needs. It features multi-band transmit and receive capabilities, a clear TFT HD color screen, and a robust set of functions including Dual Watch, Scrambler, and NOAA weather broadcast. This manual will guide you through the setup, operation, and maintenance of your new radio.

Figure 1.1: Baofeng K67 Pro Multi-band Walkie Talkies
Video 1.1: Unboxing and initial feature demonstration of the Baofeng K67 Pro.
2. Package Contents
Please check the box for the following items:
- Baofeng K67 Pro Walkie Talkie Unit
- 2600mAh Li-ion Battery
- Antenna
- Desktop Charger (with power adapter)
- Belt Clip
- Wrist Strap
- User Manual (this document)
- Headset (if included in your specific package)

Figure 2.1: Typical package contents for the Baofeng K67 Pro.
3. Parts Identification
Familiarize yourself with the different parts of your Baofeng K67 Pro radio:

Figure 3.1: Baofeng K67 Pro Parts Diagram
- Antenna
- LED Flashlight
- Status LED (TX/RX LED)
- Power/Volume Knob
- PTT (Push-to-Talk) Button
- SK1 - Programmable Key (Flashlight/Alarm Switch)
- SK2 - Programmable Key (Radio/Monitor)
- Accessory Jack
- Type-C Charging Indicator
- V/M - VFO/MR Mode Key
- A/B Select Key
- SWEEP Key
- MENU Key
- Type-C Charging Port
- Color LCD Display
- Speaker
- Microphone
- Keypad
- EXIT Key
- Jacket (for accessory jack cover)
4. Setup
4.1. Battery Installation
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery upwards until it clicks into place.
- To remove, press the release latch (usually at the bottom of the battery) and slide the battery downwards.

Figure 4.1: Battery compartment and side ports.
4.2. Antenna Attachment
- Screw the antenna into the connector on the top of the radio clockwise until it is firmly seated.
- Do not overtighten.
4.3. Belt Clip and Wrist Strap Attachment
- Attach the belt clip to the designated slot on the back of the radio using the provided screws.
- Thread the wrist strap through the loop on the top or side of the radio.
4.4. Charging the Battery
The Baofeng K67 Pro supports two charging methods:
- Type-C Direct Charging: Connect a Type-C USB cable to the Type-C charging port (14) on the side of the radio and plug the other end into a compatible USB power source. The charging indicator (9) will show charging status.
- Desktop Charger: Place the radio (with battery installed) into the desktop charging cradle. Ensure the charging contacts on the radio align with those on the cradle. Plug the desktop charger's power adapter into a wall outlet. The indicator light on the charger will show charging status (e.g., red for charging, green for fully charged).

Figure 4.2: Type-C USB direct charging.

Figure 4.3: Baofeng K67 Pro in desktop charger.
5. Basic Operation
5.1. Power On/Off and Volume Control
Rotate the Power/Volume Knob (4) clockwise to turn on the radio. Continue rotating to increase the volume. Rotate counter-clockwise to decrease volume and turn off the radio.
5.2. Frequency Mode (VFO) and Channel Mode (MR)
Press the V/M (VFO/MR Mode Key) (10) to switch between Frequency Mode (VFO) and Channel Mode (MR).
- Frequency Mode (VFO): Allows direct input of frequencies for transmission and reception.
- Channel Mode (MR): Allows selection of pre-programmed channels.
5.3. Selecting A/B Band
Press the A/B Select Key (11) to switch between the upper (A) and lower (B) display bands. This is useful for Dual Watch functionality.
5.4. Transmitting and Receiving
- Receiving: When a signal is received, the Status LED (3) will light green, and audio will be heard from the speaker (16).
- Transmitting: Press and hold the PTT (Push-to-Talk) button (5) to transmit. The Status LED (3) will light red. Speak clearly into the microphone (17). Release the PTT button to return to receive mode.
5.5. Menu Navigation
- Press the MENU Key (13) to enter the main menu.
- Use the Up/Down arrow keys on the keypad (18) to navigate through menu options.
- Press MENU again to select an option or confirm a setting.
- Use the Up/Down arrow keys to change values or select sub-options.
- Press EXIT Key (19) to exit the menu or return to the previous screen.
5.6. Dual Watch
The K67 Pro supports Dual Watch, allowing you to monitor two different frequencies or channels simultaneously. When a signal is detected on either band, the radio will switch to that band for reception. You can activate/deactivate Dual Watch via the menu.

Figure 5.1: Dual Watch feature display.
5.7. FM Radio
The radio includes an FM broadcast receiver. Access this feature through the menu or a programmable side key (SK2). You can scan for FM stations and listen to broadcasts.

Figure 5.2: FM Radio function in use.
5.8. Flashlight
The built-in LED Flashlight (2) can be activated via a programmable side key (SK1) or through the menu, providing illumination in low-light conditions.

Figure 5.3: High-illumination flashlight feature.
6. Advanced Features
6.1. Channel Name Editing
The K67 Pro allows you to edit channel names using a built-in input method. Navigate to the 'CHL NAME' option in the menu to customize channel labels for easier identification.

Figure 6.1: Channel Name Edit function.
6.2. Signaling (DTMF/2tone/5tone/MDC/BDC1200)
The radio supports various signaling methods for enhanced communication and selective calling. These can be configured in the menu under 'Signaling' options.

Figure 6.2: Signaling feature display.
6.3. Skip Frequency
Configure the radio to skip certain frequencies during scanning. This feature can be enabled or disabled in the menu under 'Skip Freq'.

Figure 6.3: Skip Frequency option.
6.4. Scrambler
The scrambler function encrypts your voice transmission, providing a level of privacy for your communications. Activate or deactivate this feature in the menu.

Figure 6.4: Scrambler feature display.
6.5. Repeater Access Tone (1000/1450/1750/2100Hz)
The radio can transmit specific tones (1000Hz, 1450Hz, 1750Hz, 2100Hz) to access repeaters. Select the appropriate tone from the menu when operating with repeaters.
6.6. Frequency/Channel/Sub-code Scan
The K67 Pro offers various scanning modes to find active frequencies, channels, or sub-codes. Access these options in the menu under 'Scan Mode'.

Figure 6.5: Frequency/Channels Scan in progress.
6.7. NOAA Weather Broadcast
Stay informed with NOAA weather alerts. The radio can receive 10 groups of NOAA weather broadcast channels. Access this feature via the menu.

Figure 6.6: NOAA Weather Broadcast feature.
6.8. Wireless Copy
The K67 Pro supports wireless copying of a channel from another compatible radio. Refer to the menu options for 'One key Frequency Search' or 'Wireless Copy' to initiate this process.

Figure 6.7: One key Frequency Search function.
6.9. Customized Side Keys (SK1/SK2)
The SK1 and SK2 side keys (6, 7) can be programmed to quickly access frequently used functions such as flashlight, alarm, or FM radio. Refer to the menu settings for key assignments.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | BAOFENG |
| Model Number | K67 Pro |
| Output Power(w) | 3w-5w |
| Battery Capacity(mAh) | 2600 |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes |
| Material | Plastic |
| Storage Channel | 640 |
| Frequency Range | 108-136mhz, 220-260 MHz, 300-390MHz, 400-520MHz, 446MHz, 65-108mhz, 400-470mhz, 136-174 MHz |
| Dimensions | 64*121*35mm (antenna included) |
| Walkie Talkie Type | Portable |
| Is_Display | Yes |
| Maximum Range | 3km-5km |
| Origin | Mainland China |
| Certification | CE, FCC |
| Use | Camping |

Figure 7.1: 2600mAh high capacity battery.
8. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: Charge the battery fully before first use. Avoid overcharging or completely draining the battery to prolong its lifespan. Store the battery in a cool, dry place when not in use for extended periods.
- Antenna Care: Always ensure the antenna is securely attached before operation. Do not operate the radio without an antenna, as this can damage the transceiver.
- Storage: Store the radio in a dry, dust-free environment away from extreme temperatures.
9. Troubleshooting
- Radio does not power on: Ensure the battery is correctly installed and fully charged. Check if the power/volume knob is turned sufficiently clockwise.
- No reception or poor audio: Verify the antenna is securely attached. Check the frequency/channel settings and ensure they match the transmitting party. Adjust the volume. Ensure squelch settings are not too high.
- Cannot transmit: Confirm the battery is charged. Ensure you are on a valid transmit frequency/channel. Check if the PTT button is functioning correctly.
- Display issues: If the screen is blank or flickering, try restarting the radio. Ensure the battery is charged.
- Short battery life: Ensure the battery is fully charged. Reduce backlight brightness, disable unnecessary features like continuous scanning or Dual Watch if not needed, and avoid transmitting at high power for extended periods.
10. User Tips
- Familiarize with Menu: Spend time navigating through the menu options to understand all available features and customize settings to your preference.
- Practice Programming: Practice programming channels and setting up advanced features like CTCSS/DCS codes for optimal communication.
- Battery Management: Carry a spare charged battery or a portable power bank for extended use, especially during outdoor activities.
- Antenna Choice: Consider using a higher-gain antenna for improved range and signal quality in challenging environments.
- Legal Compliance: Always ensure you operate the radio within the legal frequency bands and power limits applicable in your region.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for warranty claims.