Anajqaqia 140x200 cm LED Upholstered Bed Instruction Manual

1. Product Overview

The Anajqaqia 140x200 cm LED Upholstered Bed is a modern and functional double bed designed for comfort and practicality. It features a hydraulic lifting system for convenient under-bed storage, an upholstered headboard with integrated LED lighting, and a sturdy slatted base. The bed is finished in a soft velvet fabric, offering both durability and a contemporary aesthetic.

2. Safety Information

• Ensure all components are securely fastened before use.
• Do not exceed the maximum load capacity of 340 kg (750 lbs).
• Keep children and pets away from the hydraulic lifting mechanism during operation.
• Avoid placing heavy or sharp objects directly on the LED light strips.
• Use only the provided remote control for LED light operation.

3. Assembly Instructions

This bed requires assembly. Please refer to the detailed assembly instructions included in your product packaging. The assembly process is designed to be straightforward, but we recommend having two people for easier installation.

3.1. Unpacking and Component Check

1. Carefully unpack all components from the two packages.
2. Verify that all parts listed in the assembly manual are present and undamaged.
3. Lay out all components on a clean, soft surface to prevent scratches.

3.2. Frame Assembly

Follow the step-by-step guide in your manual to assemble the main bed frame. Ensure all screws and fasteners are tightened securely.

3.3. Hydraulic Mechanism Installation

Install the hydraulic lifting system as per the instructions. This mechanism allows for easy access to the under-bed storage.

3.4. Slatted Base and Headboard Attachment

Attach the slatted base to the bed frame and secure the upholstered headboard. Ensure the headboard is firmly connected.

3.5. LED Light Installation

Affix the LED light strips to the designated areas on the headboard. Connect them to the power source as instructed and test with the remote control.

4. Operating Instructions

4.1. Hydraulic Lifting System

To access the under-bed storage:

1. Remove any heavy items from the mattress.
2. Grasp the designated handle or edge of the mattress frame.
3. Gently lift the frame upwards. The hydraulic mechanism will assist in raising and holding the frame in the open position.
4. To close, gently pull the frame downwards until it locks into place.

4.2. LED Lighting System

The integrated LED lights are controlled by a remote control (not included in the provided data, assuming standard operation).

• Power On/Off: Press the power button on the remote control.
• Color Adjustment: Use the color selection buttons to change the light color.
• Brightness Adjustment: Use the brightness up/down buttons to adjust the intensity of the light.
• Mode Selection: Select various lighting modes (e.g., static, flash, fade) if available on your remote.

5. Maintenance

5.1. Frame and Slatted Base

• Regularly check all screws and connections to ensure they remain tight. Retighten if necessary.
• Wipe the metal and wood components with a soft, damp cloth. Avoid abrasive cleaners.

5.2. Velvet Upholstery

The bed is upholstered in velvet fabric, known for its soft texture and good ventilation properties.

• Regular Cleaning: Gently vacuum the velvet upholstery using a soft brush attachment to remove dust and debris.
• Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, use a mild upholstery cleaner specifically designed for velvet, testing on an inconspicuous area first.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading.

5.3. LED Lights

• The LED lights are designed for long-term use and generally require no maintenance.
• If a light strip malfunctions, contact customer support for assistance. Do not attempt to repair it yourself.

6. Troubleshooting

• Bed Frame Squeaks: Check all assembly bolts and screws. Tighten any loose connections. Ensure the slatted base is correctly positioned.
• Hydraulic Lift Not Working Smoothly: Ensure no obstructions are present in the mechanism. If the issue persists, verify that the hydraulic pistons are correctly installed according to the assembly instructions.
• LED Lights Not Turning On: Check the power connection to the LED strips. Ensure the remote control has working batteries and is pointed correctly at the receiver.
• LED Lights Flickering: Check power connections. If flickering continues, it may indicate a faulty light strip or power supply; contact support.

7. Specifications

8. Warranty and Support

For any warranty claims, technical support, or inquiries regarding missing/damaged parts, please contact the seller directly through your purchase platform. Keep your order number and product details readily available for faster service.