1. Introduction
The BAJETON BJ-9000 is a versatile and powerful multi-band walkie talkie designed for a wide range of communication needs. It features GPS and APRS capabilities for location sharing, CB/SSB/HF reception, Bluetooth programming, and a cross-band repeater function. With a 10W tri-power output and a durable design, it is suitable for outdoor exploration, industrial use, and general amateur radio operations.

2. Safety Information
RF Radiation Information
This product is intended solely for professional use where RF energy radiation requirements can be met. Users must be fully aware of RF radiation hazards and take appropriate measures to comply with RF radiation limits.
RF Radiation Basics
RF (Radio Frequency) refers to electromagnetic frequencies that can radiate into space. It is a technology widely used in fields such as communications, medical, and food processing, and it generates a certain amount of RF radiation during use.
FCC Regulatory Requirements
In accordance with the regulations of the Federal Communications Commission (FCC) of the United States, this product must comply with FCC RF radiation limits to be sold in the U.S. market. Manufacturers are required to inform users of important safety precautions by labeling the product, thus enhancing user awareness of radiation protection.
RF Radiation Safety
To ensure the health and well-being of users, experts from the fields of science, engineering, medicine, health, and industry, along with relevant organizations, have jointly developed RF radiation standards and guidelines. Adhere to the following instructions:
- The transmission time should not exceed a duty cycle of 50% (i.e., a maximum of 50% transmission time).
- RF energy radiation is only generated during transmission (talking), not during receiving (listening) or standby mode.
- Maintain a minimum distance of 2.5 centimeters between the device and the body during transmission.
3. Getting Started
3.1 Package Contents
Upon unboxing, please verify that all items are present:
- BAJETON BJ-9000 Walkie Talkie Unit
- Antenna
- Rechargeable Li-ion Battery (2800 mAh)
- Charging Dock
- Power Adapter
- USB Cable

3.2 Device Overview
Familiarize yourself with the main components and controls of your BJ-9000 walkie talkie:

Controls and Indicators:
| Component | Description |
|---|---|
| Channel Knob | Used to select channels. |
| Power Switch/Volume Knob | Turns the device on/off and adjusts volume. |
| PPT A/B/C Buttons | Programmable Push-to-Talk buttons. |
| Side Key 2 | Programmable side key. |
| Speaker | Audio output. |
| Antenna | For signal transmission and reception. |
| Indicator Light | Indicates device status (e.g., charging, transmitting). |
| Display Screen | 2.4-inch HD large color screen for information display. |
| Accessory Interface | Port for external accessories. |
| Interface Cover Screw | Secures the interface cover. |
| Function Keypad | For menu navigation and function selection. |
| Numeric Keypad | For direct frequency input and other numeric entries. |
Icon Descriptions:
| Icon | Description |
|---|---|
| VOX | Voice-Activated Transmission enabled. |
| APRS | Automatic Packet Report System active. |
| MO | Monitor function enabled. |
| TW | Tri-Watch Active (monitors 3 channels). |
| ABC | Keypad Lock (long press # to unlock). |
| RSSI | Signal Strength indicator. |
| GPS | GPS Switch & Indicator (toggles GPS positioning). |
| Z | Repeater Mode ON. |
| Battery Status | Displays remaining battery power. Flashes when nearly depleted. |
| A | Standby Indicator. |
| CT | Analog Sub-audio Tone Indicator. |
| DCS | Digital Sub-audio Tone Indicator. |
| H | High Power Indicator. |
| M | Medium Power Indicator. |
| L | Low Power Indicator. |
| N | Narrowband Mode Indicator. |
| W | Wideband Mode Indicator. |
| + | Frequency Mode (+ Frequency Offset). |
| - | Frequency Mode (- Frequency Offset). |
| R | Frequency Invert (inverts RX/TX frequencies). |
| T | Simplex communication. |
| 0 | Encryption On. |
| AM | AM Modulation. |
| SCR | Scrambler Function (voice encryption). |
4. Basic Operations
4.1 Power On/Off & Volume
- Power On: Rotate the Power Switch/Volume Knob clockwise until a "click" is heard.
- Power Off: Rotate the Power Switch/Volume Knob counterclockwise until a "click" is heard.
- Volume Adjustment: Rotate clockwise to increase volume, counterclockwise to decrease volume.
4.2 Menu Navigation
From the home screen, briefly press the [OK] key to enter the menu. Use the arrow Direction keys to navigate. Press [OK] again to confirm selections. Press [V/M] to exit the menu.
4.3 Primary/Secondary Frequency Toggle
On the standby screen, briefly press the [A/B/C] key to select the primary frequency (highlighted in blue background). Non-highlighted frequencies are secondary.
4.4 Channel Mode / Frequency Mode Toggle
On the standby screen, briefly press the [V/M] key to switch between Frequency Mode and Channel Mode. Note: If no valid channels are stored, switching to Channel Mode is disabled.
4.5 Side Key Configuration
Configure side keys via programming software. Supported functions include RADIO, MONI, SCAN, SEARCH, SOS, SPECTRUM, and Beacon TX.
4.6 Voice-Activated Transmission (VOX) Function
Operation: Menu → VOX. When enabled, the radio automatically enters transmit mode if the microphone detects sufficient sound input. Adjustable VOX sensitivity level via menu settings. VOX delay time must be configured to maintain transmission continuity.
4.7 Sweep Function
Assign a side key function as "Sweep" or long-press [OK] to quickly enter sweep mode. It detects the transmitter's carrier frequency and CTCSS/DCS (sub-tone) information, displaying them on the screen. Once the carrier frequency is detected, press the [OK] key to save the scanned frequency to a specified channel list. Supported Ranges: VHF: 136-174 MHz, UHF: 400–520 MHz.
4.8 Repeater Setup
- Activating Repeater Mode: Menu → Radio → AB RPT-Mode → ON. Standby screen displays repeater icon [Z].
- Repeater Requirements: Devices enabling the relay function must operate on different frequency bands.
- Repeater Direction Logic:
- Default Standby State: Both primary and secondary frequencies act as receivers.
- If the primary frequency first receives a valid carrier signal, the secondary frequency automatically becomes the cross-band transmitter.
- If the secondary frequency first receives a valid carrier signal, the primary frequency automatically becomes the cross-band transmitter.
- Speaker Audio Control: Configurable option: Enable/disable local speaker audio during repeater operation.
4.9 Emergency SOS Function
Assign a side key as the [Emergency Alarm] button.
Operation: Menu → Radio → SOS Mode.
- Local Alarm: The device sounds an alarm tone locally without transmitting any signal.
- Transmit Alarm Tone: Broadcasts the alarm tone via signal transmission.
- Transmit Alarm Code: Sends the alarm code through signal transmission.
4.10 CTCSS/DCS Settings
Operation: Menu → CTCSS/DCS. Select desired DCS code or CTCSS frequency.
Function: Enables selective call reception by filtering out unwanted noise signals.
4.11 Scan Function
Side Key Shortcut: Assign a side key as the Scan Key.
Configure via: Menu → Radio → Scan Mode.
- Channel Mode: Scans the channels listed in the channel memory (requires power-on scan to add).
- Frequency Mode: Scans frequencies based on the selected step setting.
- Time Mode: Resumes scanning if no operation is performed within 5 seconds after detecting a carrier signal.
- Carrier Mode: Stops scanning upon detecting a carrier signal and resumes scanning 5 seconds after the carrier disappears.
- Search Mode: Stops scanning immediately upon detecting a carrier signal.
4.12 PTT-ID Function
DTMF transmit identity S-CODE or PTT-ID.
Call Codes (15 preset groups): Menu → Signaling → S-CODE. Assign unique call codes to each segment (A/B/C) or signal type.
ID Code Setup: Menu → Signaling → PTT-ID.
Transmission Modes:
- Send on Press: After pressing the PTT, the call code/identity code is sent first, followed by the voice signal.
- Send on Release: After releasing the PTT, the call code/identity code is sent, then the transmission ends.
- Send Both: The call code/identity code is sent both when the PTT is pressed and released.
Note: Since the identity code operation is independent of the call code, if there is a conflict between the identity code and the call code settings, the identity code will be sent.
4.13 FM Radio Function
Customize the side key as a radio shortcut or long pressing a number key to enter radio mode.
- Short press [OK] to access the radio menu and select modulation mode. Set the radio frequency directly using the numeric keys.
- In radio mode, press [V/M] to toggle between Frequency Mode (VFO) and Channel Mode (MR).
- In Frequency Mode, short press the [#] key to activate auto-scan for stations.
5. Advanced Features
5.1 GPS & APRS
The BJ-9000 integrates GPS and APRS for real-time positioning and location sharing. This feature is highly beneficial for outdoor activities, rescue operations, and monitoring teammates' locations.

How to use APRS & GPS:
Video demonstrating how to set up and use APRS and GPS features on the BAJETON BJ-9000.
5.2 Cross Band Repeater
The cross-band repeater function allows the BJ-9000 to connect different frequency bands (e.g., VHF and UHF). It receives signals from one band and re-transmits them on another, extending communication range and enabling interoperability between devices on different frequencies.

5.3 Bluetooth Programming
Program your walkie talkie wirelessly using a mobile app. Simply pair your device with your smartphone via Bluetooth to input and adjust frequencies, eliminating the need for complex cables.

Download the programming app by scanning the QR codes below:

5.4 Spectrum Analyzer
The built-in spectrum analyzer provides rich spectrum information and analysis functions, helping to identify signal strength, avoid frequency collisions, and improve communication quality.

5.5 NOAA Weather Radio
The BJ-9000 supports NOAA weather reception, keeping you informed about weather conditions and potential hazards.

6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BAJETON |
| Model Number | BJ-9000 |
| Walkie Talkie Type | Portable |
| Output Power | 10W-25W (Tri-power: 1W/5W/10W) |
| Frequency Range (TX/RX) | CB: 27MHz, 18-64MHz, 136-520MHz |
| Frequency Range (RX Only) | FM: 64-108MHz, SW: 2.3-30MHz, MW: 520-1710KHz, LW: 153-279KHz, 18-620MHz, 840-999MHz (AM/FM/SSB) |
| Maximum Range | 5km-10km |
| Display | Yes (2.4-inch HD Large Colorscreen) |
| Channels | Up to 960 named memory channels |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes (2800 mAh Rechargeable Li-ion Battery) |
| Origin | Mainland China |
| Package Dimensions | 28cm (L) x 24cm (W) x 7cm (H) |
| Package Weight | 0.704 kg |
7. Maintenance
7.1 Charging Instructions
- Dock Charging (Optional): Insert the battery pack or the radio with the battery pack into the charging dock. Ensure proper contact with the charging terminals of the dock.
- Type-C Charging: Connect the provided charging cable to the power adapter and plug the power adapter into an AC power outlet. Insert the charging cable into the Type-C interface of the main unit's battery.
- When the device is charging, the red indicator light indicates charging in progress. The green indicator light indicates charging is complete.
7.2 Cleaning and Maintenance
To ensure optimal performance and extend the lifespan of this product, please follow the guidelines below for daily maintenance and cleaning.
Daily Maintenance:
- Do not pierce or scratch the product with hard objects.
- Do not store the product in environments containing chemical corrosive substances.
- Do not carry or use the product by pulling the earphone cable.
- When not using the earphone jack, cover the interface with the protective cap.
Cleaning Procedure:
Before cleaning, please power off the device and remove the battery:
- Regularly use a dry, clean, lint-free cloth or a soft brush to remove dust from the product surface and charging terminals.
- If the buttons or casing become dirty, use a neutral detergent and a non-woven cloth for cleaning. Do not use detergents, alcohol, sprays, or petroleum-based chemicals as they may damage the surface casing.
- After cleaning, ensure the product is completely dry before use.
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| No transmission or reception | Check frequency settings, antenna connection, and ensure power is sufficient. Verify VOX is not inadvertently activated. |
| Short battery life | Ensure the battery is fully charged. Reduce output power if possible. Check for excessive background processes or features. |
| Programming issues via Bluetooth app | Ensure the app is correctly installed and updated. Verify Bluetooth pairing. Restart both the radio and the mobile device. |
| Cannot receive SSB stations or other HF frequencies | While the product description mentions SSB/HF reception, some users report limited functionality. Ensure you have a compatible antenna for the specific frequency range. The radio primarily excels in VHF/UHF (FM) bands. |
| Incorrect frequency range or unexpected behavior | Do not use firmware from other brands. Using incompatible firmware may damage the product. Contact support if you suspect firmware issues. |
9. User Tips
- Antenna Compatibility: The original antenna has a frequency range of FM/136-174/400-470MHz. For frequencies outside this range (e.g., 27MHz CB or 50MHz), you must purchase and use a specialized antenna compatible with that specific frequency.
- APRS/GPS Setup: When using APRS and GPS features with multiple walkie-talkies, ensure all devices have identical settings for proper communication and location sharing.
- Firmware Caution: Always use official BAJETON firmware for this walkie-talkie. Using firmware from other brands can cause irreversible damage to the product.
10. Warranty & Support
10.1 Warranty Terms
The warranty period for this product starts from the date of sale (based on the date on the sales invoice). The main unit is covered for 12 months, and the battery and charging accessories are covered for 6 months. The following cases will require paid repair services during the warranty period:
- Failure to present this warranty card and the purchase invoice.
- This card shows signs of alteration or does not match the product.
- Defects and damages caused by using this product under non-standard conditions.
- Defects and damages caused by misuse, accidents, water ingress, or negligence.
- Defects and damages resulting from improper testing, operation, repair, installation, modification, or adjustment.
- Defects and damages caused by unauthorized repairs or disassembly.
- Defects and damages caused by force majeure.
- Normal wear and tear from regular use.
10.2 Additional Resources
A detailed user manual in PDF format is available for download. Please refer to the official product page or contact customer support for the link to the PDF manual: View User Manual (PDF)