1. Introduction
Thank you for choosing the Baofeng TR-818UV Professional FM Transceiver. This dual-band handheld radio is designed for reliable communication across VHF and UHF frequencies, offering a robust 8W output power and a range of advanced features. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use.
2. Package Contents
Please check the package for the following items:
- 1 × Baofeng TR-818UV Dual Band Radio
- 1 × 7.4V 2200mAh Li-ion Battery Pack
- 1 × Dual Band Portable Antenna
- 1 × Battery Belt Clip
- 1 × Desktop Charger with AC Adapter
- 1 × Hands-free Earpiece
- 1 × Hand Strap
- 1 × English Manual

3. Product Overview
Familiarize yourself with the various parts and controls of your TR-818UV transceiver:

- Antenna: For transmitting and receiving signals.
- Flashlight: Built-in LED light for illumination.
- Power/Volume Knob: Turns the radio on/off and adjusts volume.
- LCD: Liquid Crystal Display for showing frequency, channel, and status.
- Belt Clip: For attaching the radio to your belt.
- SK-side key1/CALL: Programmable side key, often used for call function.
- PTT key (Push-To-Talk): Press and hold to transmit, release to receive.
- VFO/MR: Switches between Frequency Mode (VFO) and Channel Mode (MR).
- SK-side key2/MONI: Programmable side key, often used for monitor function.
- A/B key: Switches between the upper and lower frequency displays.
- LED Indicator: Shows transmission (red) and reception (green) status.
- Accessory Jack: For connecting external audio accessories like the included earpiece.
- Keypad: For direct frequency input, menu navigation, and function activation.

4. Initial Setup
4.1. Installing the Battery
To install the 7.4V 2200mAh Li-ion battery pack:
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery upwards until it clicks into place.
To remove the battery, press the release latch (usually at the bottom of the battery) and slide the battery downwards.

4.2. Attaching the Antenna
Screw the portable antenna into the connector on the top of the radio clockwise until it is firmly seated.
4.3. Attaching the Belt Clip
Align the belt clip with the screw holes on the back of the radio (above the battery compartment) and secure it with the provided screws.

4.4. Charging the Battery
Before initial use, fully charge the battery. Place the radio (with battery installed) into the desktop charger. Ensure the AC adapter is connected to a power outlet. The charger's LED indicator will typically show red during charging and green when fully charged.

5. Operating Instructions
5.1. Power On/Off and Volume Control
Rotate the Power/Volume knob clockwise to turn on the radio. Continue rotating to increase the volume. Rotate counter-clockwise to decrease volume and turn off the radio.
5.2. Frequency Mode (VFO) vs. Channel Mode (MR)
Press the VFO/MR button to switch between Frequency Mode (VFO) and Channel Mode (MR). In VFO mode, you can manually input frequencies. In MR mode, you can select pre-programmed channels.
5.3. Selecting Frequencies/Channels
- In VFO Mode: Use the keypad to directly enter the desired frequency.
- In MR Mode: Use the UP/DOWN arrow keys (often integrated with the keypad or side keys) to scroll through stored channels.
5.4. Transmitting and Receiving
To transmit, press and hold the PTT (Push-To-Talk) button on the side of the radio. Speak clearly into the microphone. Release the PTT button to return to receive mode.
5.5. Dual Watch / Dual Reception
The TR-818UV supports dual watch/dual reception, allowing you to monitor two different frequencies or channels simultaneously. Use the A/B key to switch the active transmit frequency between the upper and lower displays.
5.6. VOX Function (Voice Operated Transmission)
The VOX function allows for hands-free transmission. When activated, the radio will automatically transmit when it detects your voice. Refer to the full English Manual for detailed activation and sensitivity settings.
5.7. Squelch Function
Squelch suppresses weak signals and background noise. The squelch level is adjustable from 0 (open squelch, all noise heard) to 9 (maximum squelch, only strong signals heard). Adjust this via the menu to suit your environment.
5.8. Built-in LED Flashlight
The radio includes a built-in LED flashlight. Typically, this can be activated by a short press of a dedicated side key or a combination of keys. Refer to your full manual for specific key assignments.
5.9. Key Lock
To prevent accidental key presses, the radio features a key lock function. This is usually activated by pressing and holding the '#' key. Repeat the action to unlock.
5.10. Commercial FM Radio Receiver
The TR-818UV can receive commercial FM radio broadcasts (65MHz~108MHz). This function can be accessed via the menu or a dedicated key.
6. Key Features
- Dual-band handheld transceiver with LCD display.
- DTMF encoded for advanced signaling.
- High capacity 2200mAh Lithium-ion battery.
- Commercial FM radio receiver (65MHz~108MHz).
- Incorporates 105 DCS and 50 CTCSS privacy codes.
- VOX (Voice Operated Transmission) function for hands-free operation.
- Alarm function for emergencies.
- Roger beep for end-of-transmission tone.
- Up to 128 memory channels.
- Broadband (Wide)/Narrow band (Narrow) selectable.
- Selectable power output: High (8W), Mid (5W), Low (1W).
- Display illumination and programmable keyboard.
- "Beep" function on the keyboard for audible feedback.
- Dual Watch/dual reception capability.
- Selectable Frequency step: 2.5/5/6.25/10/12.5/20/25/50KHz.
- "OFFSET" function for repeater access.
- Battery saving function "SAVE" to extend battery life.
- Timer transmission "TOT" programmable.
- Multiple scan modes available.
- Built-in RX CTCSS/DCS Scan.
- Busy Channel Lock "BCLO" function to prevent interference.
- Built-in LED flashlight.
- Programmable by PC for advanced customization.
- Squelch level adjustable from 0 to 9.
- Cross band reception.
- Tone end of transmission.
- Built-in key lock.
- Hands-free operation with included earpiece.
- Durable ABS Material construction.
7. Technical Specifications

| Category | Specification |
|---|---|
| General | |
| Frequency Range | 65-108MHz (Commercial FM radio reception only) VHF: 136-174MHz & UHF: 400-520MHz (RX/TX) |
| Memory Channels | Up to 128 channels |
| Frequency Stability | 2.5ppm |
| Frequency Step | 2.5/5/6.25/10/12.5/20/25/50KHz |
| Antenna Impedance | 50 ohm |
| Operating Temperature | -20°C to +60°C |
| Supply Voltage | DC7.4V 2200mAh Rechargeable Lithium-Ion |
| Consumption in standby | ≤75mA |
| Consumption in reception | 380mA |
| Consumption in transmission | ≤1.4A |
| Mode of operation | Simplex or semi-duplex |
| Duty Cycle | 03/03/54min (RX/TX/Standby) |
| Dimensions | 109.5 x 59.5 x 34.3mm |
| Weight | 200g (approximately) |
| Transmitter | |
| RF Power | 8W/5W/1W |
| Type of modulation | FM |
| Emission Class | 16K Ø F3E/11K Ø F3E(W/N) |
| Maximum deviation | ≤±5kHz/≤±2.5kHz (W/N) |
| Spurious Emissions | <-60dB |
| Receiver | |
| Receiver Sensitivity | 0.2uV (at 12dB SINAD) |
| Intermodulation | 60dB |
| Audio output | 1000mW |
| Adjacent channel selectivity | 65/60dB |
Note: All specifications are subject to change without notice.

8. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's surface. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: To prolong battery life, avoid overcharging or completely draining the battery. Store the battery in a cool, dry place when not in use for extended periods.
- Antenna: Ensure the antenna is securely attached. Do not operate the radio without an antenna, as this can damage the transmitter.
- Storage: Store the radio in a dry, dust-free environment away from extreme temperatures.
- Durability: The TR-818UV is constructed with durable ABS material, offering resistance to minor impacts. However, avoid dropping the radio or subjecting it to severe shocks.

9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Battery is low or not installed correctly. | Charge the battery fully. Ensure the battery is securely attached. |
| Cannot transmit or receive | Incorrect frequency/channel, antenna not attached, squelch too high, or out of range. | Verify frequency/channel settings. Check antenna connection. Lower squelch level. Move closer to the other radio. |
| Poor audio quality | Low battery, antenna issue, or interference. | Charge battery. Check antenna connection. Move away from sources of electrical interference. |
| Keypad unresponsive | Key lock is activated. | Press and hold the '#' key to unlock the keypad. |
10. User Tips
- Battery Management: Always ensure your battery is fully charged before extended use, especially for outdoor activities.
- Antenna Selection: For optimal performance, ensure you are using the correct dual-band antenna provided with the radio.
- Frequency Regulations: Familiarize yourself with local and national frequency regulations to ensure legal and safe operation.
- Channel Programming: For frequent use, program your most used frequencies into memory channels for quick and easy access. This can often be done via PC programming for efficiency.
- VOX Sensitivity: If using the VOX function, adjust the sensitivity carefully to avoid accidental transmissions or missed voice activations.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Baofeng support channels. Keep your purchase receipt as proof of purchase.