Introduction
This manual provides detailed instructions for the operation and maintenance of your SMAEL 8140 Analog Digital Dual Display Sport Watch. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.

Watch Components and Button Functions
Familiarize yourself with the watch's buttons and their primary functions:

- LIGHT (A Key): Activates the EL backlight for 3 seconds in any mode.
- START/STOP (D Key): Used to start/stop the stopwatch, adjust values in setting modes, and toggle Alarm/Chime ON/OFF.
- MODE (B Key): Cycles through different operational modes (Normal, Chronograph, Alarm, Time Setting).
- RESET (C Key): Used to reset the stopwatch, select items for setting (hours, minutes, month, date, week), and hold on stopwatch readings.
Initial Setup and Time/Date Adjustment
Before using your watch, you may need to set the correct time and date.

Setting Time and Date:
- From the Normal Time Display mode, press the MODE (B) key three times to enter the Time and Date setting mode. The seconds will flash. Press START/STOP (D) key to zero the seconds.
- Press the RESET (C) key once. The hours will flash. Press START/STOP (D) key to adjust the hour. You can cycle between 12-hour and 24-hour formats by repeatedly pressing the D key.
- Press the RESET (C) key again. The minutes will flash. Press START/STOP (D) key to adjust the minutes.
- Press the RESET (C) key a third time. The month will flash. Press START/STOP (D) key to adjust the month.
- Press the RESET (C) key a fourth time. The date will flash. Press START/STOP (D) key to adjust the date.
- Press the RESET (C) key a fifth time. The day of the week will flash. Press START/STOP (D) key to adjust the day.
- Press the MODE (B) key to exit the setting mode and return to the Normal Time Display.
Operating Instructions
Mode Switching:
Press the MODE (B) key to cycle through the following modes:
- Normal Time Display
- Chronograph (Stopwatch) Mode
- Alarm Mode
- Time Setting Mode (as described in Initial Setup)
Chronograph (Stopwatch) Mode:
- From Normal Time Display, press the MODE (B) key once to enter Chronograph mode. The display will show "00:00:00".
- Press START/STOP (D) key to start the stopwatch.
- To pause, press START/STOP (D) key again. To resume, press START/STOP (D) key.
- To record a split time (hold on reading), press RESET (C) key while the stopwatch is running. The display will show the split time. The stopwatch continues running in the background. Press RESET (C) key again to return to the running stopwatch display.
- To stop the stopwatch completely, press START/STOP (D) key.
- To reset the stopwatch to "00:00:00", press RESET (C) key after stopping.
- Press MODE (B) key to exit Chronograph mode.
Alarm Setting:
- From Normal Time Display, press the MODE (B) key twice to enter Alarm mode.
- Press the RESET (C) key. The hour digits will flash. Press START/STOP (D) key to adjust the alarm hour. Pay attention to AM/PM if in 12-hour format.
- Press the RESET (C) key again. The minute digits will flash. Press START/STOP (D) key to adjust the alarm minutes.
- Press the MODE (B) key to exit Alarm setting mode and return to Normal Time Display.
Alarm and Hourly Chime ON/OFF:
- From Normal Time Display, press the MODE (B) key twice to enter Alarm mode.
- Press START/STOP (D) key to toggle the "ALM" (Alarm) and "SIG" (Hourly Chime) functions ON or OFF.
- If the "ALM" symbol appears, the daily alarm is ON. If the "SIG" symbol appears, the hourly chime is ON. If both symbols appear, both functions are ON.
LED Night Light Display:
In any mode, press the LIGHT (A) key to activate the EL backlight. The light will stay on for approximately 3 seconds. This cold light digital display is designed to be soft and not blinding, allowing you to accurately read the time in low-light conditions.

Maintenance
Water Resistance:
Your SMAEL 8140 watch is rated for 50 meters (5ATM) water resistance. This means it is suitable for daily use, including washing hands, face, and can be worn with confidence during swimming or washing a car. However, do not operate any buttons while the watch is submerged in water. Operating buttons underwater can compromise the water resistance seals.

Cleaning:
- Wipe the watch case and strap regularly with a soft, damp cloth to remove dirt and sweat.
- For stubborn dirt on the silicone strap, a mild soap solution can be used, followed by thorough rinsing and drying.
- Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish and materials.
General Care:
- Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods.
- Keep the watch away from strong magnetic fields, which can affect its accuracy.
- The watch features a Hardlex dial window, which is resistant to scratches but not entirely scratch-proof. Avoid direct impact with hard objects.
- The watch is designed with shock absorption. However, severe impacts should still be avoided to protect internal components.

Troubleshooting
If you encounter any issues with your SMAEL 8140 watch, please refer to the following common problems and solutions:
- Display is blank or dim: The battery might be low. While the watch includes a battery, it is not rechargeable. If the display is consistently dim or blank, the battery may need replacement by a qualified watch technician.
- Time is inaccurate: Ensure the time and date are set correctly as per the "Initial Setup" section. Strong magnetic fields can also affect accuracy; keep the watch away from such sources.
- Buttons are unresponsive: Ensure the watch is not submerged in water when attempting to press buttons. If buttons remain unresponsive, there might be an internal issue requiring professional inspection.
- Water inside the watch: If you notice condensation or water inside the watch, stop using it immediately and take it to a professional watch repair service. This indicates a breach in the water resistance.
Specifications
Key technical specifications for the SMAEL 8140 watch:

| Feature | Specification |
|---|---|
| Brand Name | SMAEL |
| Model Number | 8140 |
| Item Type | Digital Wristwatches |
| Display Type | Analog-Digital (Dual Display) |
| Movement | Quartz + Electronics |
| Water Resistance Depth | 5Bar (50 meters) |
| Case Material | Plastic (Wear-resistant engineering plastic with metal accents) |
| Case Shape | Round |
| Case Thickness | 18mm |
| Dial Diameter | 53mm |
| Dial Window Material Type | Hardlex |
| Band Material Type | PU (Silica Gel) |
| Band Width | 22mm |
| Band Length | 23cm (130mm/80mm) |
| Clasp Type | Buckle |
| Net Weight | 73g |
| Features | Shock Resistant, LED Display, Chronograph, Complete Calendar, Moon Phase (Note: Moon Phase is listed in features but not explicitly visible on display in images), Alarm, Week Display |
| Battery Included | Yes |
| Rechargeable Battery | No |
| Certification | CE, RoHS |
User Tips
- Optimal Visibility: The LED backlight is effective in low light. For best battery life, use it only when necessary.
- Water Activities: Remember the "no button pressing underwater" rule to maintain water resistance. Rinse the watch with fresh water after exposure to salt water or chlorinated pools.
- Strap Comfort: The silicone strap is designed for comfort. If you experience any irritation, ensure the strap is clean and not too tight.
- Dual Time Zones: While not explicitly a feature, the dual analog-digital display can be used to quickly reference two different times if the analog hands are set to a different zone than the digital display.
Warranty and Support
For any warranty claims, technical support, or service inquiries, please contact the retailer or the official SMAEL service center. Keep your purchase receipt as proof of purchase.
Please note that unauthorized repairs or modifications may void your warranty.