1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE MN-X Series Carplay Android Intelligent System. This system is designed to upgrade your vehicle's infotainment experience with a powerful Android 14 operating system, advanced features, and seamless integration with your car's existing functions.

2. Vehicle Compatibility
The MEKEDE MN-X Series is compatible with various Mercedes-Benz models. Please verify your vehicle's specific model and NTG system version before installation.
- For Benz A-Class W176: 2013 to 2015 (NTG 4.5), 2016 to 2018 (NTG 5.0)
- For Benz GLA-Class X156: 2014 to 2015 (NTG 4.5), 2016 to 2018 (NTG 5.0)
- For Benz CLA-Class C117: 2013 to 2015 (NTG 4.5), 2016 to 2018 (NTG 5.0)
- For Benz G-Class W463: 2013 to 2018 (NTG 4.5/5.0, specific year range may vary, please confirm)
Important: Before ordering, please ensure your car has a CCC, CIC, NBT, or EVO system. The original car MASK system requires selecting the CCC system option.


3. Package Contents
Upon receiving your MEKEDE MN-X Series system, please ensure all the following items are included:
- Main Machine (Android Display Unit)
- Packaging Box
- Power Cable
- GPS Antenna
- 4G Antenna
- Microphone (MIC)
- Speaker
- Audio Adapter Box (for NTG 5.0 systems only)
- AUX Cable
- USB Cable

4. Installation Guide
4.1. General Installation
The MEKEDE MN-X system is designed for plug-and-play installation, replacing your original car display. Professional installation is recommended to ensure proper functionality and avoid damage.
4.2. Sound Output Configuration
To ensure audio output from the Android system, follow these steps:
- Connect the original car's fiber optic cable to the interface of the conversion line, and then connect it to the host unit.
- Connect the AUX cable and switch the original car's audio mode to "AUX".
Specific Connection Methods:
- If your car has an "AUX IN" hole: Use the "Audio out" cable from the Android ISO power cable to plug into the AUX IN hole.
- If your car has an "AMI" port: Use the "Audio Out" wire on the top of the Android ISO power cord to plug into the AMI cable, and then into the car's AMI port.
- For NTG 5.0 systems: Sound is transmitted via USB.
Important Note: If your car does not have an AUX or AMI port, you will need to add an FM transmitter to produce audio. Please be aware that the sound quality via an FM transmitter may not be as good as direct AUX or AMI connections. Please acknowledge this issue before proceeding with installation.


4.3. Rear View Camera Wiring (Optional)
If you are installing an aftermarket rear view camera, follow the wiring diagram provided. Ensure the reverse line detection is connected to the reversing detection lamp and the ground wire is properly secured.
If you are using an original car camera, set the camera type in the system settings to "Original back car" for proper display.

5. Operation
5.1. Main Menu and UI Styles
The system features a user-friendly main menu with access to various applications. You can customize the user interface (UI) style to match your preference, with options such as ID5, ID6, ID7, and ID8.

5.2. Dual System Switching
The MEKEDE system allows for seamless switching between the original car's infotainment system and the Android 14 system. This ensures you retain access to all original car functions while enjoying the benefits of Android.

5.3. CarPlay and Android Auto
The system comes with built-in CarPlay and Android Auto functionality, eliminating the need for additional accessories.
- Wireless CarPlay (iOS System): Connect your iPhone via Bluetooth, then click "Phone Link" on the system to establish a connection. CarPlay can also be connected via a USB cable.
- Wireless + Wired Android Auto (Android System): Connect your Android phone via USB cable, then click "Phone Link" on the system to establish a connection.

5.4. Digital Sound Processor (DSP)
Experience enhanced audio quality with the powerful built-in DSP chip, supporting 32 equalizer adjustments. This allows you to fine-tune the sound frequencies for an optimal listening experience.

5.5. 4G LTE and WiFi Connectivity
Stay connected on the go with built-in 4G modules and WiFi. The 4G functionality allows you to access cellular data networks without needing to tether to your phone's hotspot. A 4G SIM card slot is available (SIM card is optional).

5.6. Bluetooth (BT)
The smart Bluetooth system supports mobile phone pairing for hands-free calling, Bluetooth music streaming, and synchronous contact and call record access. It also supports steering wheel button control for safe driving.

5.7. GPS Navigation and Split Screen
The system includes a built-in global positioning system for omni-directional map display and real-time traffic conditions. It supports popular navigation apps like Navitel, iGO, Yandex, and Google Maps. The split-screen function allows you to display two applications simultaneously for convenience.

5.8. Car Information Display
The system can display essential car information such as speed, fuel level, oil pressure, and various safety warnings directly on the dashboard interface. Different color interfaces (Blue, Red, Green) are available for customization.

6. Advanced Features (Optional Accessories)
The MEKEDE system supports several optional accessories to enhance your driving experience. These accessories are typically sold separately.
6.1. ADAS DVR (Anti-collision Warning Driving Recorder)
Integrate an ADAS DVR for advanced safety features, including front vehicle distance prediction, front vehicle anti-collision warning, and lane departure warning to make driving safer.

6.2. AHD Reversing Video
Connect an AHD rear view camera for a clearer and higher-quality reversing video feed compared to ordinary cameras, aiding in safer parking and maneuvering.

6.3. TPMS (Tire Pressure Monitoring System)
With an optional TPMS, sensors will automatically monitor tire pressure and temperature, providing real-time statistics to the receiver for enhanced safety.

6.4. OBD II (On-Board Diagnostics)
Utilize an optional OBD II device to diagnose your car's status anytime. Monitor real-time data and retrieve fault codes from the vehicle's computer.

7. Troubleshooting
7.1. No Sound Output
Refer to Section 4.2. Sound Output Configuration for detailed steps on resolving no sound issues, including checking fiber optic, AUX, AMI connections, and the use of an FM transmitter if necessary.
7.2. Display Resolution Issues
If the OEM menu shows symptoms such as no signal, distorted lines, or a flashing display, follow these steps to adjust the resolution:
- Go to "Setting" on the main menu.
- Navigate to "Personalized Setting".
- Select "Resolution ratio" and choose the appropriate resolution that matches your original car's display screen. Incorrect resolution settings can lead to poor display quality.

7.3. iDrive Knob Control (CCC Systems)
Please note: For cars equipped with a CCC system and a metal iDrive knob, you may experience some control errors when rotating the knob within the Android menu. However, you can still control the Android menu correctly by touching the screen. If this is a concern, consider purchasing our Qualcomm series, which offers full compatibility and powerful performance. Cars with CIC, NBT, or EVO systems typically allow normal control of all menus.

8. Specifications
| Feature | Description |
|---|---|
| Brand Name | MEKEDE |
| Operating System | Android 14 |
| CPU Options | MTK8321 (4 Core 1.3GHz), MTK6762 (8 Core A53 1.8GHz), UIS7862S (2*A75 2.0GHz + 6*A55 2.0GHz), MTK8781 (2*A76 2.5Ghz + 6*A55 2.0GHz) |
| RAM/ROM Options | 2+64GB, 4+64GB, 6+128GB, 8+128GB, 12+256GB, 12+512GB |
| FinFET | 28NM, 12NM, 6NM (varies by CPU option) |
| Internet Connectivity | 4G + WiFi |
| Screen Resolution | 1280x480 or 1920x720 |
| Display Size | 10.25 inch or 12.5 inch |
| DSP (Digital Sound Processor) | Available on most models (32 EQ Adjustments) |
| Split Screen | Supported on most models |
| CarPlay / Android Auto | Built-in, Wireless & Wired |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 1.5kg |
| Max External Memory | 256G |
| Special Features | WiFi function, Support 4G Network, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, CarPlay, Android Auto, Reversing Input, Support steering wheel control |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Irish, Polish, Danish, Russian, Finnish, Korean, Dutch, Czech, Croatian, Latvian, Romanian, Japanese, Swedish, Slovak, Slovenian, THAI, Ukrainian, Spanish, English |
| Certification | CE |
| Origin | Mainland China |
| Material | Plastic Hardware |


9. User Tips
- Compatibility Check: If you are unsure about the specific model or system compatibility for your car, it is highly recommended to send a photo of your car's original CD rental unit to the seller for verification before purchasing.
- iDrive Knob Control: For Mercedes-Benz vehicles with a CCC system and a metal iDrive knob, while the knob may have some control errors in the Android menu, the touchscreen functionality remains fully operational. Consider this if you heavily rely on the iDrive knob for navigation within the Android interface.
- Sound Quality: For optimal audio quality, always prioritize connecting via AUX or AMI if available in your vehicle. If an FM transmitter is necessary, be aware that sound quality may be compromised.
10. Warranty and Support
10.1. Warranty
The MEKEDE Carplay Android Intelligent System comes with a 365-day warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
10.2. Technical Support
For any technical assistance, troubleshooting, or inquiries regarding your MEKEDE system, please contact the seller or MEKEDE customer support. Provide your product model and a detailed description of the issue for efficient service.