1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your RMshebei Tuya Smart WiFi Circuit Breaker (Model: RMDZW-3PNBL 100A). This intelligent device offers comprehensive protection against over-voltage, under-voltage, overload, and leakage, along with bidirectional energy metering and smart control features via the Tuya Smart app, voice assistants, and timing schedules. Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Safety Information
WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel.
- This product has no isolation function. Always turn off the main power supply before performing any repairs or maintenance.
- The zero line (Neutral N line) of this product is directly connected without any disconnection function.
- The device must be wired strictly according to the markings provided in this manual and on the device itself. Incorrect wiring can lead to damage or hazards.
- Although this device includes protection functions, it cannot replace a standard circuit breaker. Always install a conventional circuit breaker (e.g., DZ47, C65) upstream of this device for short-circuit protection.
- Ensure all clamp screws are tightened firmly to prevent poor contact, which can damage the device.
- This product is a three-phase four-wire (3P4W) 380V intelligent circuit breaker. It does not provide short-circuit protection and requires an air switch for this purpose.
- The only supported wiring method is one zero wire (N) and three live wires (L) (1N + 3L). This product is designed to cut only the live wires. Prohibit the use of any other wiring methods.
3. Product Overview
3.1. Key Features
- Remote Control: Manage your circuit breaker via the Tuya Smart app.
- Voice Control: Compatible with AI speakers like Google Assistant and Amazon Alexa.
- Timing Schedule: Set automated on/off schedules through the app.
- Electricity Metering: Bidirectional energy monitoring with protection support.
- Comprehensive Protection: Includes Over/Under Voltage, Over/Under Current, Overload, and Leakage Protection.
- Advanced Protections (App-only): Voltage Imbalance, Current Imbalance, Shortage Phase, Phase Sequence, and High Temperature Protection.
- Device Sharing: Share control of the device with family members via the app.
- Display: Backlit LCD screen showing real-time voltage, current, power, energy consumption, and temperature.
- Customizable Settings: Each protection parameter can be set with action thresholds and on/off states.
3.2. Components
The RMshebei Smart WiFi Circuit Breaker consists of the main unit with an integrated LCD display, control buttons, and an external current transformer (CT) for leakage protection and accurate current measurement.
- LCD Display: Shows real-time electrical parameters (voltage, current, power, energy, temperature).
- Control Buttons: Used for navigating display modes and adjusting settings. The WiFi connection button is the third physical button from left to right on single-phase meters, and the third button from top to bottom on three-phase meters.
- External Current Transformer (CT): Essential for leakage protection and precise current monitoring.
4. Specifications
| Parameter | Value |
|---|---|
| Model Number | RMDZW-3PNBL 100A |
| Type | Mini Circuit Breaker |
| Poles Number | 4 |
| Rated Supply Voltage | AC380V |
| Rated Frequency | 50/60Hz |
| Rated Current | 1-100A |
| Operation Voltage Range | AC80V-400V (Single Phase) |
| Power Display Range | 0-99999.9 kWh |
| Operating Temperature | -30°C to 70°C |
| Working Humidity | ≤85% |
| Working Altitude | Not Exceeding 2000m |
| Pollution Level | Level 3 |
| Protection Trip Action Time | <0.5s |
| Over Voltage (>U) Setting Range | 120-300V (Factory Default: 275V) |
| Under Voltage (<U) Setting Range | 80-210V (Factory Default: 175V) |
| Over Current Setting Range | 1.0-100.0A (Factory Default: 80.0A) |
| Under Current Setting Range | 1.0-100.0A (Factory Default: 10.0A) |
| Current Leakage Setting Range | 10-99mA/OFF (Factory Default: 30mA) |
| Protection Times | 1-30 times/off |
| Reset / Start Delay | 0s-9999s |
| Wiring Capacity | Insulated copper wire under 35mm² |
| Is Smart Device | Yes |
| Wireless Functionality | Yes |
| Includes Battery | No |
| EU LVD Voltage | High voltage: Above 50Vac or 75Vdc |
| Certifications | CE, FCC, RoHS |
5. Setup and Installation
5.1. Wiring Instructions
Important: Ensure the main power supply is OFF before proceeding with wiring. This device is designed for a three-phase four-wire system (3P4W).
- Connect the device using one zero wire (N) and three live wires (L).
- The product is designed to only cut the live wires. Do not use any other wiring configurations.
- Install a standard circuit breaker (e.g., DZ47, C65) upstream for short-circuit protection, as this device does not provide it.
- Ensure all connections are secure and wires are properly insulated.
Dimensions:
- Height: 89.5mm
- Width: 75.3mm
- Depth: 44.5mm (excluding CT)
5.2. App Connection (Tuya Smart / Smart Life)
- Download App: Use your smartphone to scan the QR codes provided in the manual or search for "Smart Life" or "Tuya Smart" in Google Play Store or Apple App Store. Download and install the app.
- Create Account: Open the app and create an account using your mobile number or email.
- Connect to Wi-Fi: Ensure your mobile phone is connected to your home Wi-Fi router (2.4GHz network is usually required for smart devices).
- Add Device: In the app, tap the "+" icon in the upper right corner of the homepage, or select "Add device".
- Select Device Type: Navigate to the "Energy" category and select "Switch module (Wi-Fi)" or a similar option for circuit breakers.
- Pairing Mode: On the circuit breaker, long press the WiFi button (the third physical button from left to right on single-phase meters, or the third button from top to bottom on three-phase meters) for 5 seconds until the WiFi indicator light starts to flash quickly.
- Complete Pairing: Follow the on-screen instructions in the app to complete the pairing process.
6. Operating Instructions
6.1. Display Modes
The device's LCD display can cycle through various information modes. Use the physical buttons to navigate.
| Mode | Displayed Information |
|---|---|
| Mode 1 | Voltage, Total Electricity Consumption |
| Power Factor, Total Electricity Consumption | |
| Frequency, Total Electricity Consumption | |
| A-Current, Forward Electricity Consumption | |
| P-Power, Reverse Electricity Consumption | |
| Mode 2 | A-Phase Power Parameters |
| A-Phase Parameters & Temperature | |
| B-Phase Power Parameters | |
| B-Phase Parameters & Temperature | |
| C-Phase Power Parameters | |
| C-Phase Parameters & Temperature |
6.2. Setting Parameters
To adjust protection thresholds and other settings directly on the device:
- Enter Settings: Long press the 'OK' button (or designated setting key) to enter the settings state. The display will show the setting page with a flashing data bit.
- Change Values: Use the up/down arrow keys to adjust the value of the flashing data bit.
- Confirm Page: Short press the 'OK' button to confirm the settings on the current page and move to the next setting page.
- Exit & Save: Long press the 'OK' button again to exit the settings state and save all changes.
6.3. Remote Control via App
Once connected to the Tuya Smart or Smart Life app, you can remotely control the circuit breaker and monitor real-time data from anywhere with an internet connection.
6.4. Voice Control
Integrate your circuit breaker with Google Assistant or Amazon Alexa for convenient voice commands. Once linked, you can turn the device on or off using simple voice commands.
6.5. Timing Schedule
Utilize the app's timing schedule feature to automate the operation of your circuit breaker, making your electricity usage more efficient and eco-friendly.
7. Protection Functions
The device offers various adjustable protection features. Settings can be configured via the device's buttons or the Tuya Smart app.
| Function | Set Parameter Range | Factory Default Settings | Function Description |
|---|---|---|---|
| Over Voltage Limit (H-u) | 120V-300V | 275V | If the over voltage limit is set at 300V, when the voltage is over 300V, the device will automatically switch off. |
| Under Voltage Limit (L-u) | 80-210V | 175V | If the under voltage limit is set at 80V, when the voltage is under 80V, the device will automatically switch off. |
| Over Current Limit (H-C) | 1.0-100.0A | 80.0A | If the over current limit is set at 80A, the device will automatically switch off when the current is over 80A. |
| Under Current Limit (L-C) | 1.0-100.0A | 10.0A | If the under current limit is set at 60A, the device will automatically switch off when the current is under 60A. |
| Current Leakage Limit (LE) | 10-100mA | 30mA | If the current leakage limit is set at 30mA, the device will automatically switch off when the current leakage is over 30mA. |
| Over & Under Voltage Protection Delay (u-d-5) | 1-9999 Second(S) | 3s | If the voltage is over or under the set value, the device will automatically switch off after the set delay time. |
| Over & Under Current Protection Delay (C-d-5) | 0000-9999 Second(S) | 5s | If the current is over or under the set value, the device will automatically switch off after the set delay time. |
| Over & Under Voltage Protection Recovery Time (u-r-5) | 1-9999 Second(S) | 20s | If the voltage is over or under the set value, the device will automatically switch off. When the voltage returns to normal value, it will recover after the set delay time. |
| Over & Under Current Protection Recovery Time (C-r-5) | 0000-9999 Second(S) | 20s | If the current is over or under the set value, the device will automatically switch off. When the current returns to normal value, it will recover after the set delay time. |
| Display Mode (d. SP-n) | Display Mode 1 / Display Mode 2 | Display Mode 1 | Sets the default information displayed on the LCD screen. |
| Energy Consumption Zero Clearing (CL) | OFF/On | OFF | Resets the accumulated energy consumption data. |
| Factory Settings Reset (ES-F) | OFF/On | OFF | Resets all settings to their factory default values. |
8. Troubleshooting
8.1. WiFi Indicator Light Status
- Fast flashing: The device is searching for a WiFi signal and is in pairing mode.
- Slow flashing: The device is offline and not connected to WiFi.
- Long light (solid): The device is successfully connected to WiFi.
8.2. Common Issues
- Device not turning on: Check the main power supply and ensure all wiring connections are secure. Verify that an upstream circuit breaker is not tripped.
- App connection failure: Ensure your phone is on a 2.4GHz WiFi network. Restart the device and try the pairing process again. Check if the WiFi indicator is fast flashing during pairing.
- Inaccurate readings: Verify that the external current transformer (CT) is correctly installed and connected. Ensure all wiring is tight.
- Protection tripping unexpectedly: Review your set protection thresholds in the app or on the device. Adjust them if they are too sensitive for your load.
9. Maintenance
- Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
- Periodically check all wiring connections to ensure they remain tight and secure.
- Ensure the operating environment (temperature, humidity) remains within the specified limits.
- Regularly update the Tuya Smart/Smart Life app to ensure optimal performance and access to the latest features.
10. User Tips
- Smart Home Integration: Leverage the device's compatibility with Google Assistant and Amazon Alexa for hands-free control and integration into your smart home routines.
- Energy Monitoring: Regularly check the energy consumption data in the app to identify energy usage patterns and optimize your electricity consumption.
- Custom Alerts: Set up custom alerts in the app for specific events, such as over-current or leakage, to receive immediate notifications.
- Device Sharing: For household use, share control of the device with other family members through the app's device sharing feature.
11. Warranty and Support
For detailed warranty information and further technical support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:
You may also contact the manufacturer directly for support:
Yueqing Wentong Electronic Technology Co., Ltd.No.3 Baite Road, Xiangyang Industrial Zone,
Leqing City, Wenzhou City, Zhejiang Province, China
Phone: 086 13587787770
Email: wtdzcn@163.com
Website: www.rmshebei.com