CHERRY MW5500 Wireless Mouse Instruction Manual

Introduction

The CHERRY MW5500 is a versatile wireless mouse designed for both gaming and office use. It features tri-mode connectivity (2.4G wireless, Bluetooth, and wired), a high-precision Pixart 3950 sensor, and long battery life with fast charging capabilities. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your MW5500 mouse.

Package Contents

Upon unpacking your CHERRY MW5500, please ensure all the following items are present:

• 1 x CHERRY MW5500 Mouse
• 1 x Instruction Manual
• 1 x Data Cable (Type-C)
• 1 x Anti-slip Sticker Set
• 1 x Type-C to A Adapter
• 1 x Standard 8K NANO Receiver

Setup

Connecting Your Mouse

The CHERRY MW5500 offers three connection modes: 2.4G wireless, Bluetooth, and wired (Type-C).

2.4G Wireless Connection

1. Locate the 8K NANO receiver, typically stored in a compartment on the underside of the mouse.
2. Plug the NANO receiver into an available USB-A port on your computer.
3. For optimal signal strength and connection stability, it is recommended to use the included Type-C to A adapter to place the 2.4G receiver closer to the mouse.
4. Turn on the mouse using the power switch on its underside.
5. Your computer should automatically detect and install the necessary drivers.

Bluetooth Connection

1. Turn on the mouse.
2. Activate Bluetooth pairing mode on the mouse (refer to the specific button or switch on your mouse for this function, usually indicated by a Bluetooth icon).
3. On your computer or device, go to Bluetooth settings and search for new devices.
4. Select 'CHERRY MW5500' from the list of available devices to pair.

Wired Connection

1. Connect the provided Type-C data cable to the mouse.
2. Plug the other end of the cable into an available USB port on your computer.
3. The mouse will function as a wired mouse and will also charge its internal battery.

Operating Instructions

DPI Adjustment

The MW5500 features a Pixart 3950 sensor with a DPI range of 200 to 30,000. Use the dedicated DPI button (usually located near the scroll wheel) to cycle through preset DPI settings or customize them via the Cherry Fusion software.

Polling Rate

The mouse supports a polling rate of up to 8000Hz in 2.4G wireless mode, providing a smooth and responsive cursor experience. A higher configuration computer is recommended to fully utilize the 8000Hz return rate.

Multi-Device Control and File Transfer

The MW5500 can control multiple devices (PCs, notebooks, mobile devices) with a single mouse. With the help of Cherry Fusion software technology, you can achieve cross-device operation and transfer images and files between devices, and even share clipboard content, without relying on cloud services or physical storage.

All devices must be under the same wireless network for these features. The driver can be downloaded from: https://www.cherry.cn/cherry_fusion/

AI Functions (Red AI Version Only)

The Red AI version of the MW5500 includes advanced AI functionalities accessible via the cherryaihub. Long-press the mouse wheel to activate cherryaihub and unlock features such as:

• AI Writing: Rapid generation of reports, copywriting, and other text based on templates.
• AI PPT: Quickly build presentation frameworks with massive templates.
• AI Conference: Smart meeting recording and automatic meeting minutes generation.
• AI Drawing: Generates images based on keywords, supporting various painting styles.

Maintenance

Battery Charging

The MW5500 features a 600mAh battery that supports fast charging. With a fast charging adapter, it can be fully charged in approximately 24 minutes and 12 seconds (at a maximum charging current of 2.92A). A quick 5-minute charge can provide about 12 hours of use.

Surface Care

The mouse features a delicate skin-friendly coating with a surface smoothness of Ra 0.384um, making it stain-resistant and easy to clean. To maintain its quality, wipe the mouse with a soft, dry cloth. Avoid harsh chemicals or abrasive materials.

The included Cherry texture anti-slip stickers are made with polyurethane fabric and feature a 3D embossed copper plate design. These can be applied for enhanced grip and aesthetics.

Troubleshooting

If you encounter issues with your CHERRY MW5500 mouse, consider the following:

• Connection Issues: Ensure the mouse is charged and powered on. For 2.4G wireless, try using the adapter to bring the receiver closer to the mouse to improve signal. For Bluetooth, ensure your device's Bluetooth is enabled and the mouse is in pairing mode.
• Lag or Unresponsive Cursor: If using 8000Hz polling rate, ensure your computer meets the higher configuration requirements. Try reducing the polling rate in the software if performance issues persist.
• Multi-Device Switching/File Transfer Problems: Verify that all devices are connected to the same wireless network. Ensure the Cherry Fusion software is installed and running on all connected computers.
• AI Functionality Not Working: Confirm you have the Red AI version of the MW5500. Ensure the cherryaihub software is installed and updated.

Specifications

User Tips

• For optimal 2.4G wireless performance, use the included adapter to position the receiver closer to the mouse. This can effectively improve signal strength and connection stability.
• To fully utilize the 8000Hz polling rate, ensure your computer has a higher configuration. This will provide the smoothest possible cursor experience.
• If you have the Red AI version, remember to long-press the mouse wheel to activate the cherryaihub for its advanced AI functionalities.
• The mouse's ergonomic design, including its 60mm body width and 0.7mm recessed buttons, is specifically designed for comfortable use, especially for Asian hand sizes.

Warranty and Support

The CHERRY MW5500 Wireless Mouse comes with a 1-year warranty from the date of purchase. For technical support, driver downloads, and software updates (Cherry Fusion or cherryaihub for the Red AI version), please visit the official CHERRY website at https://www.cherry.cn/cherry_fusion/.