Akko 3108RF Prunus Lannesiana Mechanical Keyboard User Manual

1. Introduction

Thank you for choosing the Akko 3108RF Prunus Lannesiana Mechanical Keyboard. This full-size keyboard is designed to enhance your typing and gaming experience with its durable PBT double-shot keycaps, responsive Akko V3 Cream Yellow Pro switches, and versatile dual-mode connectivity. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your keyboard.

Image: Akko 3108RF Prunus Lannesiana Mechanical Keyboard, showcasing its full layout and aesthetic design.

2. Package Contents

Please check the package for the following items:

• Akko 3108RF Prunus Lannesiana Mechanical Keyboard
• USB Type-C Cable
• 2.4G Wireless Receiver (USB Dongle)
• User Manual (this document)
• Additional Keycaps (if included with specific variants)

Note: Batteries (AAA) are required for wireless operation and are not included for international shipments.

3. Specifications

Akko V3 Cream Yellow Pro Switch Specifications:

• Type: Linear
• Operating Force: 50±10gf
• Total Travel: 3.3 mm
• Pre Travel: 2.0±0.5 mm

Image: Force Travel Diagram for Akko V3 Cream Yellow Pro Switch. The graph shows force (gf) on the Y-axis and travel (mm) on the X-axis, indicating an operating point around 2mm travel and a reset point slightly before that.

4. Setup

4.1 Battery Installation (for 2.4G Wireless Mode)

The Akko 3108RF keyboard requires 2 AAA batteries for wireless operation. Batteries are not included in the package.

1. Locate the battery compartment on the underside of the keyboard.
2. Open the battery compartment cover.
3. Insert 2 AAA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

Image: Battery compartment on the back of the keyboard, illustrating where to insert AAA batteries.

4.2 Wired Connection (USB Type-C)

1. Connect the provided USB Type-C cable to the Type-C port on the keyboard.
2. Connect the other end of the USB cable to an available USB port on your computer.
3. The keyboard will be automatically detected and ready for use.

The keyboard features efficient cable routing options on its underside to help manage your desk space.

Image: Underside of the keyboard, highlighting the Type-C port and three cable routing channels for organized cable management.

4.3 2.4G Wireless Connection

1. Ensure batteries are correctly installed in the keyboard (refer to Section 4.1).
2. Locate the 2.4G wireless receiver (USB dongle) in the package.
3. Plug the 2.4G wireless receiver into an available USB port on your computer.
4. Turn on the keyboard's wireless mode (usually via a switch on the back or side of the keyboard, refer to specific key combinations if available).
5. The keyboard should automatically connect to your computer.

Image: Diagram showing the keyboard's dual connectivity options: wired via USB Type-C to a desktop PC and wireless via 2.4Ghz to a laptop.

5. Operating Instructions

5.1 Switching Between Wired and Wireless Modes

The Akko 3108RF supports both wired (USB Type-C) and 2.4G wireless modes. To switch between modes, use the physical switch located on the keyboard (exact location may vary, typically on the back or side). Ensure the keyboard is powered on for wireless mode.

5.2 Keycap Features

The keyboard is equipped with PBT double-shot keycaps. PBT plastic is known for its durability, resistance to shine, and a pleasant textured feel, ensuring a long-lasting and comfortable typing experience. The double-shot molding process means the legends are molded into the keycap, preventing them from fading over time.

Image: Keycap profile comparison chart, showing Cherry profile (used on this keyboard) alongside ASA, JDA, OEM, and OSA profiles with their respective height and angle measurements for different rows (R1, R2, R3, R4).

5.3 Akko Macro V1.0

The keyboard supports Akko Macro V1.0 for custom key assignments and macro programming. Refer to the official Akko software or website for detailed instructions on how to configure macros.

5.4 N-Key Rollover

The Akko 3108RF supports N-Key Rollover (NKRO), which means every key press is registered independently, preventing ghosting and ensuring all commands are recognized even when multiple keys are pressed simultaneously. This is particularly beneficial for fast typists and gamers.

5.5 Operating System Compatibility

This keyboard is compatible with a wide range of operating systems, including Windows, macOS, iOS, and Android. Functionality may vary slightly depending on the specific operating system and device.

6. Maintenance

6.1 Cleaning the Keyboard

• General Cleaning: Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and frame. Avoid excessive moisture.
• Dust Removal: Use compressed air to blow away dust and debris from between the keycaps.
• Deep Cleaning (Keycaps): For thorough cleaning, keycaps can be carefully removed using a keycap puller. Wash them in warm, soapy water, rinse thoroughly, and ensure they are completely dry before reattaching.

6.2 Battery Care

• If the keyboard will not be used for an extended period, remove the AAA batteries to prevent leakage.
• Replace batteries when performance degrades or the keyboard fails to connect wirelessly.
• Dispose of used batteries responsibly according to local regulations.

7. Troubleshooting

7.1 Keyboard Not Responding (Wired Mode)

• Ensure the USB Type-C cable is securely connected to both the keyboard and the computer.
• Try connecting the keyboard to a different USB port on your computer.
• Test the keyboard on another computer to rule out a computer-specific issue.
• Check if the cable is damaged; try a different USB Type-C cable if available.

7.2 Keyboard Not Responding (2.4G Wireless Mode)

• Ensure the keyboard has fresh AAA batteries installed and they are correctly oriented.
• Verify that the keyboard's wireless mode switch is turned on.
• Make sure the 2.4G wireless receiver (USB dongle) is securely plugged into a USB port on your computer.
• Try plugging the USB dongle into a different USB port.
• Move the keyboard closer to the USB dongle to ensure a strong signal.
• Re-pair the keyboard with the dongle if necessary (refer to specific key combinations in the quick start guide if provided).

7.3 Keys Not Registering or Double-Typing

• Clean the affected key(s) to remove any debris that might be interfering with the switch mechanism (refer to Section 6.1).
• If the issue persists, it might indicate a faulty switch. Since the switches are not hot-swappable, professional repair might be required.

7.4 Macro Functions Not Working

• Ensure you have installed the latest Akko Macro V1.0 software.
• Verify that your macros are correctly configured and saved within the software.
• Check for any conflicts with other software or system settings.

8. User Tips

Based on general user feedback for mechanical keyboards:

• Ergonomics: Consider using a wrist rest to maintain a comfortable typing posture and reduce strain during long typing sessions.
• Customization: While the switches are not hot-swappable, the keyboard supports LED modification for users with preserved LED slots, allowing for personalized lighting if desired.
• Firmware Updates: Periodically check the official Akko website for any firmware updates for your keyboard model to ensure optimal performance and access to new features.

Note: No specific user tips were available from provided reviews or Q&A for this product.

9. Warranty and Support

Your Akko 3108RF Prunus Lannesiana Mechanical Keyboard comes with a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or visit the official AKKO website.

For technical support, troubleshooting assistance, or any other inquiries, please contact AKKO customer service through their official website or the contact information provided in your product documentation.

Note: Please retain your proof of purchase for warranty claims.