1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hiworld Car Wiring Harness Adapter and Canbus Box Decoder. This product is designed to integrate aftermarket car audio and navigation systems with your vehicle's existing electrical system, particularly for compatible Peugeot and Citroen models. The CANbus box facilitates communication between your new head unit and the vehicle's CANbus system, ensuring proper functionality of steering wheel controls, door status, and other vehicle-specific features.
2. Compatible Vehicle Models
This wiring harness adapter and CANbus box decoder are compatible with the following vehicle models:
- Peugeot:
- 301 (2014)
- 408 (2014)
- 307 (2007-2013)
- 308 (2012-2016)
- 308s (2015)
- 508 (2011-2017)
- 2008 (2015)
- 3008 (2013)
- Citroen:
- C4 (2008-2011)
- Quatre (2012)
- C4l (2014)
- C4 Quatre (2015-2018)
- C-Elysee (2008-2013)
- C3-Xr (2015+)
- C5 (2013-2016)
- Ds4 Ds5 Ds6 (2014-2018)
3. Specifications
| Feature | Description |
|---|---|
| Brand Name | skyfame |
| Model Name (Harness) | CAB9605 |
| CANbus Box Brand | HIWORLD WC |
| CANbus Box Model | PAF1.20, PAF1.21 |
| Item Type | Fascias (Wiring Harness Adapter) |
| External Testing Certification | CCC |
| Main Power Line Interface | 16-pin |
| Harness Length (approx.) | 22cm / 0.72ft |
| Package Weight (approx.) | 0.165 kg |
| Package Dimensions (L x W x H) | 26cm x 20cm x 6cm |
4. Setup and Installation
The Hiworld Car Wiring Harness Adapter is designed for plug-and-play installation, eliminating the need to cut original vehicle wires. However, professional installation or guidance from experienced personnel is highly recommended due to the complexity of car audio and CANbus integration.
4.1 Pre-Installation Checks
- Ensure your vehicle model and year are listed in the compatible models section.
- Verify that your aftermarket Android head unit meets standard pin definitions and has a 16-pin main power line interface.
- Confirm all components of the kit are present and undamaged.
- Disconnect the vehicle's battery before starting any electrical work.
4.2 Wiring Connection
The harness connects various components of your car's electrical system to your new Android head unit. Refer to the diagrams below for detailed wiring instructions.
Key Connections:
- Main Power Line: Connects to the 16-pin interface of your Android head unit.
- CANbus Box: Integrates with the vehicle's CANbus system to enable communication.
- Radio Antenna: Connect the vehicle's radio antenna to the adapter.
- USB: Connect any USB extensions or devices as needed.
- GPS Navigation Antenna: Connect your GPS antenna for navigation functionality.
- Reverse Video Input Cable: For connecting a reverse camera.
- 4G Antenna: If your head unit supports 4G connectivity.
- RCA Cables: For audio/video input/output (e.g., external amplifiers, monitors).
- Speaker Outputs (FL, FR, RL, RR): Connect to the corresponding speaker inputs on your head unit.
- Power (ACC, Battery +12V, Battery GND): Ensure these are correctly connected to the head unit's power inputs.
- Control Wires (KEY1, REVERSE, BRAKE CTL, AUTO ANT): Connect these to the respective control inputs on your head unit for features like steering wheel controls, reverse camera activation, parking brake safety, and automatic antenna control.
4.3 Post-Installation Configuration
After physical installation, configure your Android head unit:
- Enter the factory settings menu of your Android host.
- Navigate to the car bus configuration menu.
- Select the corresponding CANbus brand (HIWORLD WC) and model (PAF1.20 or PAF1.21).
- It is recommended to connect to WiFi and update the latest MCU and configuration file for optimal performance.
5. Operating Instructions
Once installed and configured, the wiring harness and CANbus box operate automatically to facilitate communication between your vehicle and the Android head unit. The CANbus box translates vehicle data (e.g., steering wheel controls, door status, reverse gear signal) into a format your head unit can understand.
- Steering Wheel Controls: After proper CANbus configuration, your steering wheel buttons should control the head unit's volume, track skipping, and mode selection.
- Reverse Camera: When the vehicle is put into reverse gear, the head unit should automatically display the reverse camera feed (if connected).
- Ignition (ACC): The head unit will power on and off with the vehicle's ignition.
6. Maintenance
The Hiworld Car Wiring Harness Adapter and Canbus Box Decoder are designed for durability and require minimal maintenance. Follow these guidelines to ensure longevity:
- Ensure all connections are secure and free from corrosion. Periodically check for any loose wires.
- Keep the CANbus box and wiring away from excessive heat, moisture, and direct sunlight.
- Avoid physical damage to the wiring or connectors during other vehicle maintenance.
- If you experience any issues, do not attempt to modify the wiring harness. Consult a professional.
7. Troubleshooting
If you encounter problems with your wiring harness or CANbus box, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Head unit does not power on. | Loose power connection, blown fuse, incorrect wiring. | Check all power connections (ACC, +12V, GND). Inspect vehicle fuses. Verify wiring against diagrams. |
| Steering wheel controls not working. | CANbus box not configured, incorrect CANbus model selected, faulty connection. | Ensure CANbus box is correctly connected. In Android host factory settings, verify HIWORLD WC and PAF1.20/PAF1.21 are selected. Update MCU/configuration file. |
| No sound from speakers. | Loose speaker connections, incorrect speaker wiring. | Check all speaker wire connections (FL, FR, RL, RR). Ensure polarity is correct. |
| Reverse camera not activating. | Reverse signal wire not connected, camera faulty, head unit setting. | Verify the REVERSE wire is correctly connected. Check camera functionality. Ensure head unit settings for reverse camera are enabled. |
| Intermittent functionality. | Loose connections, poor contact. | Re-check all connections for tightness and proper seating. |
8. User Tips
- Compatibility Check: Always double-check the compatibility list for your specific vehicle model and year before purchasing and installing.
- Professional Installation: While designed for plug-and-play, professional installation is highly recommended to avoid potential damage to your vehicle's electrical system or the product itself.
- Software Updates: After installation, connect your Android head unit to Wi-Fi and check for the latest MCU and configuration file updates to ensure optimal performance and compatibility with the CANbus box.
- CANbus Settings: Pay close attention to selecting the correct CANbus brand (HIWORLD WC) and model (PAF1.20 or PAF1.21) in your Android head unit's factory settings. Incorrect settings can lead to non-functional features.
9. Warranty and Support
All products come with a one-year warranty from the date of purchase, covering manufacturing defects. This warranty does not cover issues arising from:
- Abuse or misuse of the product.
- Human-induced damage or accidental damage.
- Water ingress or exposure to liquids.
- Improper operation or installation not in accordance with this manual.
- Modifications or repairs performed by unauthorized personnel.
In case of product defects covered by the warranty, we will negotiate to provide necessary accessories for repair depending on the situation.
For technical support or warranty claims, please contact your seller or the manufacturer directly with your purchase details and a description of the issue. Providing pictures or videos of the problem can help expedite the support process.
