1. Introduction
The Tuya Smart Air Box is an intelligent device designed for remote monitoring of your indoor air environment. It accurately detects various environmental parameters including Formaldehyde (CH2O), Volatile Organic Compounds (VOC), Carbon Dioxide (CO2), Temperature, and Humidity. This device integrates seamlessly with your smart home ecosystem, allowing for automated responses to changes in air quality.

2. Key Features
- Multi-Parameter Detection: Monitors Formaldehyde (CH2O), VOC, CO2, Temperature, and Humidity.
- Smart Home Integration: Compatible with Tuya Smart App, enabling intelligent linkage with other smart home devices (e.g., air purifiers, fans, humidifiers, air conditioners).
- Real-time Monitoring: Provides real-time data on air quality parameters.
- Alert Notifications: Sends messages to your alarm when parameters exceed set standards.
- Dual Connectivity: Available in both Tuya WiFi and Tuya Zigbee versions (requires Zigbee 3.0 gateway for Zigbee version).
- Compact Design: Small and unobtrusive, suitable for various indoor environments.
3. Setup and Installation
3.1 Power Supply
The Smart Air Box requires a stable power supply. Use a power adapter with an output current larger than 1A. Do NOT use a power bank for continuous power supply, as insufficient voltage can lead to disconnection and improper operation.
- Connect the provided USB power supply cord to the device and a suitable power adapter.
- Ensure the power adapter provides at least 5V/1A.
3.2 Gateway Requirement
Important: The Zigbee version of this product requires a Zigbee 3.0 gateway to function. The WiFi version connects directly to your home WiFi network.
- For Zigbee version: Ensure your Zigbee 3.0 gateway is set up and connected to your network before attempting to pair the Smart Air Box.
- For WiFi version: Ensure your 2.4GHz WiFi network is active and accessible.
3.3 Pairing with Tuya Smart App
After powering on the device, follow the instructions within the Tuya Smart App to pair your Smart Air Box. The app will guide you through the process of adding a new device.

4. Operating Instructions
4.1 Real-time Monitoring
Once paired, the Smart Air Box continuously monitors the air quality in its environment. You can view real-time readings for Formaldehyde, VOC, CO2, Temperature, and Humidity directly on the Tuya Smart App.
4.2 Intelligent Linkage
The Smart Air Box can be linked with various smart home products through the Tuya Smart App to automate environmental optimization. Examples include:
- Formaldehyde/VOC: If excessive levels are detected, a smart air purifier can be automatically turned on.
- Carbon Dioxide (CO2): If CO2 levels are exceeded, a smart fresh air fan can be automatically turned on.
- Temperature: If the temperature is abnormal, the air conditioner temperature can be automatically adjusted.
- Humidity: If humidity is too low or too high, a smart humidifier can be turned on/off automatically.
When any monitored parameter exceeds a predefined standard, a message will be sent to your alarm (this smart linkage functionality requires compatible smart home products).

5. Specifications
| Parameter | Value |
|---|---|
| Working Temperature | -20°C to 85°C |
| Working Voltage (Rated) | 4.8-12V |
| Working Current | 10-496mA |
| Size | 90mm x 90mm x 35mm |
| Power Supply Mode | USB 5V/1A |
| Communication Protocol | ZigBee3.0 (for Zigbee version) |
| Color | White |
| Shell Material | PVC |
| Gas Type | CO2 |
| DIY Supplies | Electrical |
| Certification | CE |
| Battery Included | No |
| With LCD Screen | No |
5.1 Examination Range
- Formaldehyde: 0-10.0 (mg/m³)
- VOC: 0-99.9 (ppm)
- Carbon Dioxide (CO2): 0-1000 (ppm)
- Temperature: 0-60 (°C)
- Humidity: 0-95 (%)
6. Package Contents
The package includes:
- Smart Air Box (x1)
- Instruction for use (x1)
- Card pin (x1)
- USB power supply cord (x1)
7. Important Note on CO2 Sensor Readings
The air detection sensor in this device calculates CO2 output based on VOC data and equivalent formaldehyde. This carbon dioxide sensor is uniquely designed with a detection range of 0-1000ppm and is only suitable for indoor use. There might be differences in detection values compared to traditional carbon dioxide detectors, requiring numerical conversion for comparison.
- The carbon dioxide sensor of this product displaying 300-400ppm is equivalent to 400-1200PPM of traditional carbon dioxide sensors.
- The carbon dioxide sensor of this product displaying 400-500ppm is equivalent to 1200-3500PPM of traditional carbon dioxide sensors.

8. Maintenance
- Keep the device clean and free from dust to ensure accurate readings.
- Avoid exposing the device to extreme temperatures or humidity outside its operating range.
- Do not disassemble the device, as this may void the warranty and damage internal components.
- Ensure proper ventilation around the device for optimal performance.
9. Troubleshooting
9.1 Device Not Working/Disconnected
- Check Power Supply: Ensure the device is connected to a power adapter with an output current larger than 1A. Insufficient voltage can cause disconnections. Avoid using power banks.
- Check Gateway (Zigbee version): Verify that your Zigbee 3.0 gateway is properly functioning and connected to your network.
- Check WiFi (WiFi version): Ensure your 2.4GHz WiFi network is stable and the device is within range.
- Restart Device: Disconnect and reconnect the power supply to restart the Smart Air Box.
- Re-pair Device: If issues persist, try re-pairing the device with the Tuya Smart App.
9.2 Inaccurate Readings
- Ventilation: Ensure the device is placed in an area with good air circulation and not obstructed.
- Interference: Keep the device away from strong electromagnetic fields or sources of high heat/humidity that could affect sensor accuracy.
- Calibration: While the device is generally factory-calibrated, consistent discrepancies might warrant checking for firmware updates via the Tuya app.
10. User Tips
- Placement: For best results, place the Smart Air Box in a central location within the room you wish to monitor, away from direct drafts, windows, or heating/cooling vents.
- CO2 vs. CO: Please note that this device is a CO2 (Carbon Dioxide) meter, not a CO (Carbon Monoxide) detector. CO2 levels are related to ventilation and human respiration, while CO is a highly toxic gas. Ensure you understand the difference for proper safety.
- App Automation: Explore the automation features within the Tuya Smart App to create custom scenarios for your smart home devices based on air quality readings. This can significantly improve your indoor environment without manual intervention.
- Power Stability: Always use a dedicated wall adapter with sufficient current (1A or more) for the device. Unstable power can lead to unreliable readings or disconnections.
11. Warranty and Support
For warranty information and technical support, please refer to the official Tuya Smart website or contact your retailer. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is available for download from the manufacturer's support page for more detailed information.