UGREEN ES702

Contents

UGREEN Jump Starter Power Pack ES702 User Manual

Model: ES702

1. Introduction

Thank you for choosing the UGREEN Jump Starter Power Pack ES702. This device is a versatile and powerful tool designed to jump-start 12V vehicles with dead batteries and serve as a portable power bank for charging electronic devices. Featuring a 12000mAh battery capacity and a peak current of 1000A, it is suitable for a wide range of vehicles. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the device and vehicle:

  • Do not attempt to jump-start a frozen battery.
  • Ensure proper polarity connection (red clamp to positive, black clamp to negative) to avoid short circuits.
  • Do not allow the red and black clamps to touch each other.
  • Keep the device away from children.
  • Do not expose the device to extreme temperatures, direct sunlight, or water.
  • Do not disassemble or modify the device.
  • Remove the jump starter from the vehicle battery within 30 seconds after the engine starts.
  • Use only the provided smart battery clamps.

3. Package Contents

Verify that all items are present in your package:

  • UGREEN Jump Starter Power Pack ES702
  • Smart Battery Clamps
  • USB Charging Cable
  • Storage Pouch
  • User Manual
UGREEN Jump Starter with Smart Clamps and Storage Pouch
Figure 3.1: UGREEN Jump Starter with Smart Clamps and Storage Pouch

4. Product Overview

The UGREEN Jump Starter ES702 features a compact design with a digital display to show the battery level. It includes USB ports for charging and a dedicated interface for the smart battery clamps.

Digital Display showing 100% battery level
Figure 4.1: Digital Display with Battery Level Indicator

5. Specifications

Product Parameters including dimensions and electrical ratings
Figure 5.1: Product Parameters and Dimensions
Parameter Value
Name UGREEN Car Jump Starter
Model No. ES702
Battery Capacity 12000mAh
Input 5V/2.4A (USB)
Output 5V/2.4A (USB)
Total Output 24W Max
Starting Current 600A
Peak Current 1000A
Net Weight 470g
Dimensions (L x W x H) 161.5mm x 85mm x 33mm
Battery Type Li-Polymer Battery
Vehicle Service Type 12V for 6.0L Gasoline and 3.5L Diesel Engines
Internal battery structure showing 1000A high current capability
Figure 5.2: High Current Capability (1000A Peak)

6. Charging the Jump Starter

Before first use, fully charge the jump starter. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.

  1. Connect the provided USB charging cable to the input port of the jump starter.
  2. Connect the other end of the USB cable to a 5V/2.4A USB wall adapter (not included) or a powered USB port.
  3. The digital display will show the charging progress. When fully charged, it will display "100%".

7. Operating Instructions

7.1. Jump Starting a Vehicle

This jump starter is designed for 12V vehicles with up to 6.0L gasoline engines or 3.5L diesel engines.

  1. Ensure the jump starter is at least 50% charged.
  2. Turn off the vehicle's ignition and all accessories.
  3. Insert the smart battery clamps into the jump starter's dedicated port.
  4. Connect the red (+) clamp to the positive (+) terminal of the vehicle's battery.
  5. Connect the black (-) clamp to the negative (-) terminal of the vehicle's battery.
  6. Once connected, the smart clamps will indicate a ready status (e.g., a solid green light). If an error is detected (e.g., reverse polarity), an alarm or indicator will activate.
  7. Start the vehicle's engine.
  8. Once the engine starts, immediately remove the smart battery clamps from the vehicle battery, then disconnect them from the jump starter.
Diagram showing how to connect the jump starter to a car battery
Figure 7.1: Jump Starting a Vehicle Connection Diagram

7.2. Using as a Power Bank

The jump starter can also charge your electronic devices via its USB output port.

  1. Connect your device's USB charging cable to the jump starter's USB output port.
  2. The jump starter will automatically begin charging your device.
  3. The digital display will show the remaining battery level of the jump starter.

8. Safety Features and Protections

The UGREEN Jump Starter ES702 is equipped with multiple intelligent protection functions to ensure safe operation for both the user and the vehicle:

  • Low Battery Protection: Prevents damage from over-discharge.
  • Reverse Connection Protection: Alerts and prevents operation if clamps are connected incorrectly.
  • Reverse Charging Protection: Prevents current flow back into the jump starter from the vehicle.
  • Overcurrent Protection: Safeguards against excessive current draw.
  • Short Circuit Protection: Automatically shuts off in case of a short circuit.
  • High Temperature Protection: Monitors internal temperature and prevents overheating.
  • Overvoltage Protection: Protects against voltage surges.
  • Undervoltage Protection: Ensures stable operation within safe voltage limits.
Diagram illustrating various battery protection functions
Figure 8.1: Built-in Battery Protection Functions

9. Maintenance and Storage

  • Store the jump starter in a cool, dry place away from direct sunlight and moisture.
  • Recharge the device every 3-6 months to prevent deep discharge and prolong battery life.
  • Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Ensure the smart clamps are clean and free of corrosion before and after each use.

10. Troubleshooting

Problem Possible Cause Solution
Vehicle does not start Jump starter battery is low. Recharge the jump starter.
Clamps are not connected properly. Ensure clamps are securely attached to the correct battery terminals.
Vehicle battery is severely damaged. Consult a professional mechanic.
Smart clamps show an error. Reverse polarity connection. Disconnect and reconnect clamps with correct polarity.
Short circuit detected. Check for any metal contact between clamps or with vehicle parts.
Jump starter not charging. Faulty charging cable or adapter. Try a different USB cable and wall adapter.

11. User Tips

  • For optimal performance, ensure the jump starter is fully charged before long trips or storing it in your vehicle.
  • Always check the digital display for the battery level before attempting a jump start.
  • In cold weather, keep the jump starter in a warmer environment (e.g., inside your home) until needed, as extreme cold can affect battery performance.

12. Warranty and Support

UGREEN products typically come with a 12-month warranty from the date of purchase. For warranty claims, technical support, or any questions regarding your UGREEN Jump Starter Power Pack ES702, please contact UGREEN customer service or visit the official UGREEN website for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.