LEXXSON 5 inch Wireless CarPlay Moto Android Auto Portable Digital Motorcycle Dashboard GPS Navigation Display Screen

Introduction

Thank you for choosing the LEXXSON 5-inch Wireless CarPlay and Android Auto Motorcycle Navigation Display Screen. This device is designed to enhance your riding experience by providing seamless connectivity, navigation, and entertainment directly on your motorcycle's dashboard. This manual will guide you through the installation, operation, and maintenance of your new device.

Product Features

• Wireless CarPlay & Android Auto: Experience the freedom of wireless connectivity for navigation, music, and calls without cable clutter.
• HD 5-inch Screen: Features a high-definition display with greatly reduced bezels and enhanced display quality for clear visibility.
• IP67 Waterproof & Dustproof: Designed to withstand harsh weather conditions, fully dustproof, and protected against temporary immersion in water.
• Fast Boot: Ready to navigate in approximately 3 seconds, ensuring minimal waiting time.
• Audio and Video Separation: Facilitates easier connection to Bluetooth headsets or motorcycle speakers for clear audio output.
• Optional Accessories: Supports optional front and rear Tire Pressure Monitoring System (TPMS) and Driving Recorder (DVR) for enhanced safety and functionality.
• Wide Compatibility: Suitable for various models including motorcycles, electric bikes, and ATVs.

Package Contents

Please check the package for the following items:

• LEXXSON 5.0 inch Motorcycle Navigation Display Screen
• Mounting Bracket
• Power Cable
• User Manual (PDF available online)

Note: Optional accessories such as TPMS sensors and DVR are sold separately.

Specifications

Safety Precautions

• Ensure all connections are secure before riding.
• Do not attempt to disassemble or modify the device.
• Always prioritize road safety. Adjust settings or interact with the screen only when it is safe to do so, or when the motorcycle is stationary.
• Avoid using a high-pressure water gun directly on the screen, camera, or tire pressure monitors.

Setup and Installation

1. Power Connection Precautions

• The smart screen's power wire (Red ACC+12V) must be connected to your motorcycle's ACC+12V (not the B+ terminal on the battery).
• The smart screen's negative wire (Black) must be connected to the negative terminal of your motorcycle's battery.

IMPORTANT NOTES:

• If the smart screen's power wire (Red ACC+12V) is connected to the motorcycle's battery's constant power (B+), the screen will not turn off when the ignition is off, leading to battery drain.
• If the smart screen's power wire (Red ACC+12V) is connected to a motorcycle with a power supply greater than 12V, it will burn out the smart screen. Ensure your power source is 12V.
• The USB power supply is unstable; it is recommended to connect to the motorcycle's ACC+ (12V) for reliable operation.

2. Bracket Installation

1. Twist the ball head onto the back clip until it is securely tightened.
2. Utilize the variable diameter handle set to support original handlebars ranging from 12-28 cm, ensuring compatibility with various vehicle models.
3. Install the main unit onto the bracket. Adjust its position to suit your vehicle model and riding preference, then tighten the screws to complete the installation.

Operating Instructions

1. Wireless CarPlay & Android Auto Connection

The device automatically connects to your smartphone for Wireless CarPlay or Android Auto when you start your motorcycle, provided your phone's Bluetooth and Wi-Fi are enabled and previously paired.

2. Bluetooth Audio Output (Headphones/Helmet)

• Bluetooth earphones and helmets can only be connected to your mobile phone for use, and cannot be connected directly to the smart screen.
• Before or after successfully enabling CarPlay or Android Auto through your phone with the screen's Bluetooth, you need to connect your phone to your Bluetooth earphones or helmet. This will allow you to hear the audio from your phone through your Bluetooth device.

3. Online Navigation & Music

Once connected to CarPlay or Android Auto, you can utilize your phone's online navigation applications for real-time routing and access online music streaming services directly from the display.

4. Driving Recorder (Optional)

If you have the optional driving recorder connected, you can manage recordings and settings through the display.

Replay Interface Function Introduction:

• Recording Time: Displays the current recording duration.
• Homepage: Returns to the main screen.
• Video Playback: Access recorded videos.
• Stop/Start Recording: Controls video recording.
• Swap Front and Rear Recordings: Switches between camera views.
• Take a Photo: Captures a still image.

Connecting Mobile Phone to View Recorder:

1. On the display, click on 'CarPlay' then 'WiFi Video'.
2. Scan the QR code displayed on the screen to download the companion APP to your mobile phone.
3. Turn on the WiFi switch on your phone to connect to the display's WiFi (password: 12345678).
4. After a successful connection, your mobile phone can display the recorder screen.

Note: Android phones can download videos to the local phone, while Apple phones can only download to iCloud.

5. Tire Pressure Monitoring System (TPMS) (Optional)

If you have the optional TPMS installed, follow these steps for setup and monitoring:

1. Set the tire pressure unit according to your requirement, either Bar or Psi.
2. Set the air pressure alarm value according to different car models. The tire pressure will be red-warned if it is too low or too high compared to the set value.
3. Tire Pressure Pairing: 'A' corresponds to the front wheel (FRO), 'B' corresponds to the rear wheel (BAC). Click to pair. Install the 'A' tire pressure sensor and activate it on the front wheel, then install the 'B' tire pressure sensor and activate it on the rear wheel.

Note: If the tire pressure value is not displayed, please pair again. If you need to replace a sensor, please unpair the old one and then pair with the new tire pressure sensor.

Maintenance

• Cleaning: Use a soft, damp cloth to clean the screen. Do not use abrasive cleaners or solvents.
• Water Exposure: While the device is IP67 waterproof, avoid using a high-pressure water gun to rinse the screen, camera, and tire pressure monitor directly.
• Cable Management: Periodically check all cables for wear and tear. Ensure they are securely fastened and not exposed to excessive strain or heat.

Troubleshooting

Problem: Screen does not turn off with ignition.

Solution: This indicates the power wire (Red ACC+12V) is connected to the motorcycle's constant battery power (B+) instead of the ACC+12V. Reconnect the red wire to an ACC+12V source that powers off with the ignition.

Problem: Screen does not power on or is damaged.

Solution: Ensure the power supply is exactly 12V. Connecting to a power supply greater than 12V can burn out the smart screen. Verify all wiring connections are correct and secure.

Problem: Tire pressure value is not displayed (for optional TPMS).

Solution: Try re-pairing the TPMS sensors. If replacing a sensor, ensure you unpair the old sensor before pairing the new one.

Problem: iPhone 15 or newer phones are not connecting to CarPlay.

Solution: Check for available firmware updates for the LEXXSON display. Ensure your iPhone's iOS is up to date and that CarPlay is enabled in your phone's settings. Sometimes, a simple restart of both devices can resolve connectivity issues.

User Tips

• Screen Brightness: Adjust the screen brightness in the device settings for optimal visibility in various lighting conditions, especially bright sunlight.
• Included Accessories: The device comes with the necessary mounting bracket and power wiring for installation.

Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact LEXXSON customer service. A comprehensive user manual in PDF format is available for download at https://manuals.plus/m/72035a6a705bb126518e7941b417042b19c4379e9bda7bedb9f22e156db83bf5.

Frequently Asked Questions (FAQ)

Q: Does the device come with holders and wiring?

A: Yes, the package includes a mounting bracket and the necessary power cable for installation.

Q: What is the screen's brightness (Nits)?

A: The specific Nits value is not provided in the general specifications. However, the screen is designed for clear visibility. You can adjust the brightness settings on the device to suit your riding conditions.

Q: Is there a firmware update for newer iPhone models (e.g., iPhone 15)?

A: For compatibility with the latest smartphone models and operating systems, it is recommended to periodically check the manufacturer's official website or contact customer support for any available firmware updates.