ANYFAR 5 inch Wireless CarPlay Moto Android Auto Portable Digital Motorcycle Dashboard GPS Motorcycle Navigation Display Screen User Manual

1. Product Overview

The ANYFAR 5 inch Wireless CarPlay Moto Android Auto Portable Digital Motorcycle Dashboard is a versatile display screen designed to enhance your riding experience with seamless connectivity and navigation. It supports both Wireless CarPlay and Android Auto, offering hands-free navigation, music, and calls directly on your motorcycle's dashboard.

Key Features:

• Wireless CarPlay & Android Auto for seamless smartphone integration.
• HD 5-inch screen with reduced bezels for enhanced display quality.
• IP67 waterproof rating, dustproof and resistant to rain and splashes.
• Fast Boot: Ready to navigate in 3 seconds.
• Audio and video separation for easier connection to Bluetooth headsets or motorcycle speakers.
• Optional accessories: Front and rear tire pressure monitoring (TPMS) and driving recorder.
• Applicable to various models: Motorcycles, Electric bikes, ATVs, etc.

2. Package Contents

Before installation, please ensure all items are present in the package:

• 5.0 inch Motorcycle Navigation Display Unit
• Mounting Bracket
• Power Cable

3. Setup and Installation

3.1 Bracket Installation

1. Twist the ball head onto the back clip (ensure it is tightened securely).
2. Utilize the variable diameter handle set, which supports 12-28 cm original handlebars, to fit your vehicle model.
3. Install the main unit onto the bracket. Adjust it to the appropriate position for your vehicle, then tighten the screws to complete the installation.

3.2 Power Connection Precautions

• The smart screen's power wire (Red ACC+12V) must be connected to your motorcycle's ACC+12V (NOT the B+ on the battery).
• The smart screen's negative wire (Black) must be connected to the negative terminal of your motorcycle's battery.

NOTE:

• If the smart screen's power wire (Red ACC+12V) is connected to the motorcycle's battery's constant power (B+), the screen will not turn off when the ignition is off.
• If the smart screen's power wire (Red ACC+12V) is connected to a motorcycle with a power supply greater than 12V, it will burn out the smart screen.
• The USB power supply is unstable; it is recommended to connect to the motorcycle's ACC+ (12V).

3.3 Tire Pressure Sensor Installation Guide (Optional)

1. Set the tire pressure unit according to your requirement, either Bar or Psi.
2. Set the air pressure alarm value based on your motorcycle's specifications. The tire pressure will be red-warned if it is too low or too high compared to the set value.
3. Tire Pressure Pairing: 'A' corresponds to the front wheel (FRO), 'B' corresponds to the rear wheel (BAC). Click to pair. Install the 'A' tire pressure sensor and activate it on the front wheel, then install the 'B' tire pressure sensor and activate it on the rear wheel.

Note: If the tire pressure value is not displayed, please pair again. If you need to replace the sensor, please unpair and then pair with a new tire pressure sensor.

4. Operating Instructions

4.1 Wireless CarPlay & Android Auto Connection

The device auto-connects to Wireless CarPlay & Android Auto when you start your motorcycle, providing hands-on-wheel navigation, music, and calls without cables or clutter.

4.2 Connecting to Bluetooth Headphones or Helmet

• Bluetooth earphones and helmets can only be connected to your mobile phone for use, and cannot be connected directly to the smart screen.
• Before or after successfully enabling CarPlay or Android Auto through your phone with the screen's Bluetooth, you need to connect your phone to Bluetooth earphones or helmets. This will allow you to hear the audio from your phone through your Bluetooth device.

4.3 Online Music and Navigation

The display supports online music playback and online navigation, allowing you to access your favorite tunes and the latest map information for your routes.

4.4 Operation of the Driving Recorder (Optional)

The driving recorder interface provides controls for recording and playback:

• Recording Time: Displays the current recording duration.
• Homepage: Returns to the main screen.
• Video Playback: Access recorded videos.
• Stop/Start Recording: Toggles recording on/off.
• Swap Front/Rear Recordings: Switches between camera views.
• Take a Photo: Captures a still image.

Replay Interface Function Introduction:

• Video Playback
• Video Recording
• Function Settings
• Homepage
• Unlocked Video/Photo
• Locked Video
• Photo
• Play/Pause
• Lock a Video
• Full Screen
• Switch between Front and Rear Screen Recording
• Checklist
• Delete the Checklist

4.5 Connecting Mobile Phone to View Recorder

1. On the display, click on 'CarPlay' - 'WiFi Video'.
2. Scan the QR code displayed to download the companion APP.
3. Turn on the WiFi switch on your phone to connect to the display's WiFi (password: 12345678).
4. After a successful connection, your mobile phone can display the recorder screen.

Note: Android phones can download videos to the local phone, while Apple phones can only download to iCloud.

5. Maintenance

To ensure the longevity and optimal performance of your ANYFAR Motorcycle Display, please follow these maintenance guidelines:

• Cleaning: Use a soft, damp cloth to clean the screen. Avoid abrasive cleaners or solvents.
• Water Exposure: While the device is IP67 waterproof, do not use a high-pressure water gun to rinse the screen, camera, and tire pressure monitor directly.
• Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight.
• Cable Inspection: Periodically check all cables and connections for any signs of wear or damage.

6. Troubleshooting

• Screen does not turn off with ignition: Ensure the red power wire (ACC+12V) is connected to your motorcycle's ACC+12V, not directly to the battery's constant power (B+).
• Screen does not power on: Verify that the power wire connections are secure and correctly wired to ACC+12V and the negative terminal of the battery. Check for any blown fuses in the power line.
• Tire pressure value not displayed (Optional TPMS): If the tire pressure value is not showing, try re-pairing the sensors as per the installation guide (Section 3.3). If replacing a sensor, unpair the old one first.
• No audio from Bluetooth helmet/headphones: Confirm that your phone is successfully connected to the display via Bluetooth, and then ensure your phone is connected to your Bluetooth helmet or headphones. The display does not directly connect to audio output devices.
• Unstable power supply: Always connect the device to the motorcycle's ACC+ (12V) rather than relying on USB power, which can be unstable.

7. Specifications

8. User Tips

• Verify Package Contents: Before starting installation, always confirm that all necessary components, including the mounting bracket and power cables, are present in your package. This prevents delays during setup.
• Secure Mounting: Ensure the bracket is firmly attached to your handlebars and the display unit is securely mounted to the bracket to prevent movement or detachment during rides.
• Optimal Viewing Angle: Adjust the display to an angle that provides clear visibility without obstructing your view of the road or motorcycle instruments.

9. Warranty and Support

For detailed warranty information, technical support, or further assistance, please refer to the official user manual PDF available from the seller or manufacturer. This document provides comprehensive details on product guarantees and service procedures.

You can find the official user manual PDF at: User Manual (PDF)