1. Introduction
The Smartmi Electric Heater Smart Version DNQ01ZM is a convection heater designed for efficient and comfortable heating of home rooms. It features silent operation, dual security protection, and smart capabilities for an enhanced user experience. This manual provides essential information for the safe and effective use of your new heater.
Front view of the Smartmi Electric Heater with its digital display showing temperature.
2. Important Safety Instructions
Please read and understand all safety instructions before using the heater to prevent injury or damage.
- Do Not Cover Ventilation: Ensure that the ventilation openings on the heater are never covered. Obstruction can lead to overheating and fire hazards.
- Hot Surface: The heater's surface can become very hot during operation. Do not touch the hot surface to avoid burns. Keep children and pets away from the heater.
- Overheat Protection: The heater is equipped with a built-in thermostat that automatically shuts off the power if the body temperature exceeds 85°C.
- Tip-Over Protection: A built-in protection switch automatically shuts off the heater if it tilts more than 45 degrees, preventing accidents.
- Power Supply: Ensure the heater is connected to a 220V, 50Hz power supply.
- Placement: Place the heater on a stable, level surface. Do not place it near flammable materials or in areas where it could be easily knocked over.
Visual indicators for high-temperature and tip-over safety features.
3. Package Contents
Upon unpacking, please verify that all items are present and in good condition:
- Smartmi Electric Heater unit
- Instruction Manual
The heater as it appears in its packaging, with the manual.
4. Specifications
| Feature | Detail |
|---|---|
| Product Type | Convection Heater |
| Model Number | DNQ01ZM |
| Product Size | 680mm (W) x 445mm (H) x 200mm (D) |
| Rated Power | 2000W |
| Power Shifts | 1st Shift: 1000W, 2nd Shift: 2000W |
| Rated Voltage | 220V |
| Rated Frequency | 50Hz |
| Heating Element | Fe-Cr-Al Alloy Heating Wire |
| Functions | Adjustable Thermostat, Overheat Protection |
| Installation | Freestanding, Portable |
| Certification | RoHS, CCC |
| Recommended Use | Bedroom, Living Room |
Product dimensions for placement and reference.
5. Setup
The Smartmi Electric Heater is designed for easy setup as a freestanding unit.
- Unpack: Carefully remove the heater from its packaging. Retain packaging for future storage or transport.
- Positioning: Place the heater on a flat, stable surface in the desired room. Ensure there is adequate clearance around the heater for proper ventilation (at least 30cm from walls and furniture). Do not place it directly under a power outlet.
- Power Connection: Plug the power cord into a suitable 220V, 50Hz electrical outlet.
6. Operating Instructions
The Smartmi Electric Heater utilizes convection heating to distribute warmth evenly without drying the air, and operates silently.
Power On/Off and Heat Settings
- Locate the power switch on the side of the heater.
- To turn on the heater at 1000W (low heat), slide the switch to position 'I'.
- To turn on the heater at 2000W (high heat), slide the switch to position 'II'.
- To turn off the heater, slide the switch to the 'OFF' position.
The power switch for selecting heat levels.
Smart Features and Thermostat
The Smart Version of this heater includes an adjustable thermostat and smart capabilities. The digital display on the unit shows the current temperature. Refer to the full Smartmi app instructions (if applicable) for advanced control and scheduling features.
The heater's mute design ensures quiet operation, ideal for bedrooms.
Convection Heating Principle
The heater works by creating an air circulation flow, distributing heat evenly throughout the room. This method avoids the dry air often associated with other heating types.
Illustration of how convection heating works to warm a room.
The Fe-Cr-Al alloy heating element heats up quickly for fast warmth.
7. Maintenance
Regular cleaning and proper care will ensure the longevity and efficient operation of your Smartmi Electric Heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.
- Ventilation: Periodically check that the air inlets and outlets are free from dust and debris. Use a soft brush or vacuum cleaner to gently remove any blockages.
The heater's metal fuselage is designed for durability and easy maintenance.
8. Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions:
- Heater does not turn on:
- Ensure the power cord is securely plugged into a working outlet.
- Check if the power switch is set to 'I' or 'II'.
- Verify that the power outlet is functioning by plugging in another appliance.
- Heater turns off unexpectedly:
- The overheat protection may have activated. Unplug the heater and let it cool down for at least 30 minutes before restarting. Ensure ventilation is not blocked.
- The tip-over protection may have activated. Ensure the heater is on a stable, level surface and has not been tilted.
- Insufficient heating:
- Ensure the heater is set to the desired power level (1000W or 2000W).
- Check if the room size is appropriate for the heater's output.
- Ensure windows and doors are closed to minimize heat loss.
9. User Tips
- For optimal heating, place the heater in the center of the room or near a cold wall, but always maintain safe distances from furniture and curtains.
- Utilize the 1000W setting for maintaining warmth in smaller rooms or for energy saving, and the 2000W setting for faster heating in larger spaces.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
