Lamicall BP09

Contents

Lamicall BP09 Motorcycle Phone Mount Holder

Model: BP09

Introduction

The Lamicall BP09 Motorcycle Phone Mount Holder is designed to securely hold your smartphone on your motorcycle, bicycle, or scooter handlebars. It features a quick lock and release mechanism, adjustable width, and 360-degree rotation for optimal viewing. This manual provides instructions for proper installation, operation, and maintenance to ensure safe and effective use of your device.

Safety Information

  • Ensure the mount is securely fastened to the handlebar before placing your phone.
  • Always double-check that your phone is firmly locked into the mount before riding.
  • Do not attempt to adjust the mount or phone while operating your vehicle. Pull over to a safe location if adjustments are needed.
  • Avoid obstructing your view of the road or vehicle controls.
  • Regularly inspect the mount for any signs of wear or damage. Replace if necessary.

Package Contents

Please verify that all items are present in your package:

  • Lamicall BP09 Phone Mount Holder
  • Handlebar Clamp
  • Instruction Manual (this document)

Setup Instructions

  1. Attach the Handlebar Clamp: Open the handlebar clamp and position it on your desired section of the motorcycle, bicycle, or scooter handlebar. Tighten the screw until the clamp is firmly secured. Ensure it does not rotate freely.
    Lamicall BP09 Phone Mount on a motorcycle handlebar with a phone displaying a map.
    Figure 1: Lamicall BP09 Phone Mount securely installed on a motorcycle handlebar.
  2. Adjust Phone Mount Width: The phone mount features an easy adjustable knob. Turn the knob counter-clockwise to increase the width for larger phones, and clockwise to reduce the width for smaller phones. Adjust it to fit your phone's dimensions.
    Diagram showing how to adjust the width of the phone mount by turning a knob clockwise to reduce and counter-clockwise to increase.
    Figure 2: Adjusting the phone mount width using the knob.
  3. Insert Your Phone: With the mount adjusted to the correct width, gently press your phone into the mount. The 1-second lock and release mechanism will automatically secure your phone. Ensure it clicks into place.
    Instructions for 1-second lock and release mechanism, showing a phone being inserted and locked into the mount.
    Figure 3: Demonstrating the 1-second lock and release feature.

Setup Demonstration Video

Video 1: A demonstration of the Lamicall BP09 phone mount's installation, phone insertion/removal, shockproof protection, and 360-degree rotation features on a bicycle.

Operating Instructions

  1. Securing Your Phone: Once your phone is placed in the mount, ensure the side clamps are fully engaged and the phone feels secure. The mount is designed with full rubber protection to prevent scratches and provide a firm grip.
    Image highlighting the 'Full Rubber Protection' feature of the mount, designed to prevent phone scratches.
    Figure 4: Full rubber protection ensures your phone is safe from scratches.
  2. One-Hand Operation: The mount allows for easy one-hand insertion and removal of your phone, making it convenient for quick stops.
  3. Adjusting Viewing Angle: The mount supports 360-degree rotation, allowing you to orient your phone in portrait or landscape mode and adjust the tilt for optimal viewing during navigation or video recording.
    Image showing the phone mount on a bike handlebar, with a phone displaying a map for navigation.
    Figure 5: Phone mounted on handlebars for easy navigation.
  4. Camera Friendly Design: The mount is designed to be camera-friendly, ensuring your phone's camera is not obstructed, allowing for video recording while riding.
    Image highlighting the 'Camera Friendly' design of the mount, showing the phone's camera area unobstructed.
    Figure 6: Camera-friendly design for unobstructed recording.

Maintenance

  • Clean the mount regularly with a soft, damp cloth. Avoid harsh chemicals.
  • Ensure all screws and clamps remain tight. Re-tighten if necessary.
  • Store the mount in a cool, dry place when not in use.
  • Check the rubber pads for wear and tear. Worn pads may reduce grip.

Troubleshooting

Issue: Phone feels loose in the mount.
Solution: Ensure the adjustable knob is tightened sufficiently to match your phone's width. Check that the 1-second lock mechanism is fully engaged. If the issue persists, inspect the rubber pads for wear.
Issue: Mount slides on the handlebar.
Solution: Re-tighten the handlebar clamp screw. Ensure the clamp is properly aligned and not overtightened to avoid damage to the handlebar.
Issue: Difficulty inserting or removing phone.
Solution: Adjust the width using the knob. The mount should provide a snug fit without excessive force. Ensure no debris is obstructing the locking mechanism.

Specifications

Attribute Detail
Product Name Lamicall Motorcycle Phone Mount Holder
Model Number BP09
Material ABS, Plastic
Item Weight 8.8 ounces
Package Dimensions 6.5 x 4.02 x 2.32 inches
Device Size Supported 4.7 - 6.8 inch
Mounting Type Handlebar Fix
Features Anti-Corrosion, Portable, Flexible, 360 Degree Rotation
Compatible Brand All
Charger No
Origin Mainland China, Guangdong

User Tips

  • For optimal stability, ensure the handlebar clamp is as tight as possible without damaging your handlebar.
  • Always test the phone's security in the mount by gently shaking it before starting your ride.
  • Utilize the 360-degree rotation feature to minimize glare on your phone screen, especially during sunny conditions.
  • Consider using a safety tether for your phone, especially on rough terrain, as an extra precaution.

Warranty and Support

Lamicall products are designed for durability and performance. For any questions, technical support, or warranty claims, please contact Lamicall customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty purposes.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.