1. Introduction
The FOSSiBOT FAC580 is a high-efficiency 580W alternator charger designed to provide fast and reliable charging for FOSSiBOT power stations and 99% of third-party power stations. It features versatile compatibility, advanced multi-layer protection, and a professional cooling system to ensure safe and stable operation. This manual provides detailed instructions for installation, operation, and maintenance of your FAC580 charger.
2. Package Contents
Please check the package contents upon unboxing to ensure all items are present:
- 1 x FOSSiBOT FAC580 Alternator Charger
- 1 x Input Cable (5M)
- 1 x Output Cable (0.5M)
- 4 x Screws
- 1 x Screwdriver
- 1 x User Manual

3. Product Overview
Familiarize yourself with the components of the FAC580 Alternator Charger:

- Wire terminal to MC4: Connects to the power station.
- Power indicator light: Displays the product status.
- Fan: Facilitates product heat dissipation.
- Switch button: Controls power on/off and gear selection (charging modes).
- Wire crimping terminal to O-ring terminal: Connects to the car battery.
4. Setup and Installation
Follow these steps to properly install your FAC580 Alternator Charger:

- Step 1: Connect the Cables
- Fix the input and output lines to the FAC580 with the provided screws.
- Before installation, check that all product functions are working properly.
- Connect the output and input cables of the FAC580 properly.
- Step 2: Track
- Route the input cable from the vehicle to the car battery, ensuring it is securely placed and not interfering with moving parts.
- Step 3: Wire to Battery
- Ensure the FAC580 switch is in the off position (O).
- Connect the input cable to the car battery:
- Red wire to Battery + (Positive terminal)
- Black wire to Battery - (Negative terminal)
- Step 4: Fixed
- Securely fix the FAC580 onto a stable surface in the car, such as the car wall, using appropriate mounting hardware.
5. Operating Instructions
The FAC580 offers two charging modes for different scenarios.

- Step 5: Connect Power Station
- Connect your power station to the FAC580 using an XT90-MC4 cable (not included, typically supplied with the power station).
- Step 6: Select Mode & Start Charging
- Use the switch button (4) to select the desired charging mode.
Charging Modes:
- Mode 1 (Recommended for Driving): Road-Powered Charging
Activate this mode during journeys to store power. This allows you to charge your power station while driving, ensuring you have power upon reaching your destination.

Figure 5.2: Mode 1 - Road-Powered Charging - Input Voltage 13.2-14V: 300W Max Output
- Input Voltage >14V: Auto boost to 580W (Fast Charging)
- Input Voltage <13.2V: Auto Cuts Off (to protect car battery)
- Mode 2 (Emergency Use Only): Emergency Engine-Off Charging
Use this mode when you need urgent power with the engine off. The FAC580 will instantly power your power station and protect your car's battery while charging.

Figure 5.3: Mode 2 - Emergency Engine-Off Charging - Input Voltage 13.2-14V: 300W Max Output
- Input Voltage >14V: Auto boost to 580W (Fast Charging)
- Input Voltage <13.2V: Auto Cuts Off (to protect car battery)
Automatic Voltage Adjustment:
The FAC580 charger automatically adjusts the output power according to the input voltage. When the input voltage is out of the voltage range, it automatically stops charging to protect both the car battery and the power station.

6. Maintenance
- Cleaning: Keep the charger clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- Ventilation: Ensure the fan and vents are not obstructed to allow for proper cooling.
- Connections: Periodically check all cable connections to ensure they are secure and free from corrosion.
- Storage: When not in use for extended periods, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
The FAC580 is equipped with multi-layer protection features to ensure safe operation. If you encounter issues, refer to the following:

- No Charging Output:
- Check if the input cable is securely connected to the car battery and the FAC580.
- Ensure the output cable is properly connected to the power station.
- Verify the car battery voltage is within the operational range (above 13.2V for charging). If the voltage is too low, the charger will automatically cut off.
- Check the switch button position.
- Over-temperature Protection:
- If the charger becomes excessively hot, it may activate over-temperature protection and stop charging. Ensure proper ventilation and clear any obstructions from the fan and vents. Allow the unit to cool down before resuming operation.
- Over-current/Over-voltage/Short-circuit Protection:
- If these protections are triggered, the charger will cease operation to prevent damage. Disconnect all connections, inspect for any faults (e.g., short circuits in cables, incorrect wiring), and reconnect after resolving the issue.
- Under-Voltage Protection (UVP):
- The charger will stop charging if the input voltage drops below 12V (for 12V systems) or 24V (for 24V systems) to protect the car battery from deep discharge. The charger will recover when the voltage rises to 12.5V or 25V respectively.
8. Specifications

| Category | Detail |
|---|---|
| General | Brand: FOSSiBOT Type: Alternator Charger Model: FAC580 Color: Black |
| Power Input Specifications | Charging Voltage Range: 12V - 18V / 24V - 33V Under-Voltage Protection (UVP): 12V Under-Voltage Recovery: 12.5V Over-Voltage Protection (OVP): 35V Over-Voltage Recovery: 31V |
| Output Specifications | Rated Output Power: 580W No-Load Output Voltage: 45 - 48V Max Output Current: 15A Charging Efficiency: 92% Standby Power Consumption: < 3W |
| Weight & Size | Product Weight: 0.8kg Package Weight: 1kg Product Size (L x W x H): 18.2 x 16.2 x 4.7 cm Package Size (L x W x H): 19 x 17 x 5 cm |
9. User Tips
- For optimal charging efficiency, ensure your vehicle's engine is running when using Mode 1.
- Always double-check the polarity when connecting to the car battery (Red to +, Black to -) to prevent damage.
- Consider the ambient temperature; while the FAC580 has a professional cooling system, extreme heat can affect performance.
10. Warranty and Support
The FOSSiBOT FAC580 Alternator Charger comes with a 1-year warranty. For technical support, warranty claims, or any questions regarding the product, please contact your retailer or the official FOSSiBOT customer service. Keep your purchase receipt as proof of purchase for warranty services.