1. Introduction
The Douk Audio U2PRO is a high-performance USB Digital Interface designed to convert USB audio signals into various digital outputs, including Optical, Coaxial, and I2S. Equipped with the advanced XMOS XU316 chip, it ensures pristine, lossless audio transmission with minimal latency and exceptional clarity. This device is ideal for audiophiles and gamers looking to upgrade their audio systems by feeding a clean, stable, and jitter-free digital signal to DACs, amplifiers, and AV receivers that may lack direct USB input. Its compact size and versatile compatibility make it a powerful addition to any audio setup.

2. Features
- Unlock Pristine Lossless Audio: Easily converts USB signals from various sources (PC, Mac, phone, Raspberry Pi) into clean and simultaneous Optical, Coaxial, and I2S outputs. Provides a clear, stable, and jitter-free digital signal for sound quality upgrades.
- Ultra-high Resolution with XMOS XU316: Features the latest XMOS XU316 chip for virtually no latency, stable signal transmission, and exceptional sound clarity. Supports PCM up to 32bit/768kHz and DSD512 for high-end music streaming and professional audio playback.
- Strong Compatibility via UAC Mode Switch: Includes a UAC mode switch for broad compatibility. UAC 1.0 mode offers plug-and-play, driver-free use with gaming consoles like PS4, PS5, and Switch. UAC 2.0 mode supports high-resolution audio for advanced playback needs on devices like PCs, tablets, and phones.
- Expandable Oscillator Design: Designed with internal space for compatible crystal oscillators, allowing audiophiles and DIY enthusiasts to upgrade to preferred high-precision clocks for further jitter reduction and enhanced sonic performance.
- Compact Size with Convenient Indicators: Pocket-sized and USB-powered, the U2 PRO comes with a USB-C to USB-A/C cable for wide device compatibility. Real-time PCM/DSD indicators on the front panel make it easy to monitor sample rates and formats.
3. Package Contents
Please check the box for the following items:
- 1x U2 PRO Digital Interface
- 1x Optical Cable
- 1x USB-C to USB-A/USB-C Cable
- 1x User Manual

4. Setup
4.1 Connecting the Device
- Power Supply: The U2 PRO is USB-powered. Connect the included USB-C to USB-A/USB-C cable to the USB Type-C input port on the U2 PRO and to a suitable USB power source (e.g., computer USB port, USB wall adapter).
- Audio Input: Connect your audio source (PC, Mac, phone, PS5, Switch, etc.) to the USB Type-C input port on the U2 PRO using the provided USB cable.
- Audio Output: Connect the U2 PRO to your DAC, amplifier, or AV receiver using one of the following output options:
- Optical Output (OPT-OUT): Use an optical cable to connect to your receiving device.
- Coaxial Output (COAX OUT): Use a coaxial cable to connect to your receiving device.
- HDMI-IIS Output: Use an HDMI cable to connect to a compatible device that supports IIS input via HDMI. Refer to the pinout diagram below for compatibility.

4.2 UAC Mode Switch
The U2 PRO features a UAC 1.0/2.0 mode switch on the bottom of the device. The selected mode will take effect only after a restart.
- UAC 1.0 Mode: Compatible with PS4, PS5, Switch, etc. Offers plug-and-play, driver-free operation.
- UAC 2.0 Mode: Works perfectly with PC, tablet, phone, network music players, etc., enabling high-resolution audio support.

4.3 Driver Installation (for UAC 2.0 on PC)
For optimal performance and high-resolution audio support on Windows 10/11 PCs in UAC 2.0 mode, you may need to install the dedicated driver. Please use the included USB drive to install the required driver and follow the instructions provided in the user manual or video guide for proper player setup.


5. Operation
5.1 Basic Usage
Once connected and drivers are installed (if necessary), the U2 PRO will automatically detect the incoming USB audio signal and convert it to the selected digital output. Ensure your receiving DAC/amplifier is set to the correct input source (Optical, Coaxial, or HDMI-IIS).
5.2 Sampling Rate Indicators
The front panel of the U2 PRO features LED indicators that clearly show the current working status, including the sampling rate and format:
- Blue LED: Indicates PCM (Pulse Code Modulation) audio.
- Red LED: Indicates DSD (Direct Stream Digital) audio.
- Specific LEDs light up to show the detected sampling rate (e.g., 44.1K/48K, 88.2K/96K, 176.4K/192K, 352.8K/384K, 705.6K/768K for PCM; DSD64, DSD128, DSD256, DSD512 for DSD).

5.3 Supported Audio Formats
The U2 PRO exclusively supports 2.0 channel stereo audio. Multichannel formats such as 5.1, 7.1, or Dolby formats are not supported.
5.4 Product Overview Video
6. Maintenance
6.1 Oscillator Replacement
The U2 PRO supports oscillator replacement for advanced users who wish to customize their audio experience. Please note that this process requires soldering and the oscillators are not pluggable.
Required Oscillator Specifications:
- Frequency: 24.000MHz
- Voltage: 1.8-3.3V (active oscillator)
- Type: Can be SMD or through-hole (DIP)
- SMD Size: 5032
- DIP Spec: DIP14
- The smaller the frequency tolerance (+ppm), the better.
Note: While fixed 3.3V oscillators have been tested to work normally, compatibility with every voltage within the 3.3–5V range cannot be guaranteed. An incompatible oscillator will not damage the U2 PRO; it may simply not function.

7. Troubleshooting
- No Sound Output:
- Ensure the U2 PRO is properly powered via the USB-C input.
- Verify that the USB audio source is correctly connected and playing audio.
- Check that the UAC mode switch (1.0 or 2.0) is set appropriately for your source device and restart the U2 PRO if changed.
- Confirm that your DAC/amplifier is set to the correct input (Optical, Coaxial, or HDMI-IIS) corresponding to the U2 PRO's output.
- If using a PC in UAC 2.0 mode, ensure the dedicated driver is installed and the audio output device is selected in your operating system's sound settings.
- Distorted or Incorrect Audio:
- Ensure the U2 PRO is receiving a stable USB signal.
- Verify that the audio source is playing 2.0 channel stereo audio. Multichannel formats (5.1, 7.1, Dolby) are not supported and may result in no sound or distorted output.
- Check the sampling rate indicators on the U2 PRO to confirm it matches the source audio.
- Device Not Recognized by PC:
- Switch the UAC mode to 2.0 and install the necessary drivers from the included USB drive.
- Try connecting to a different USB port on your computer.
- Ensure your operating system (Windows 10/11, Mac OS) is up to date.
- Oscillator Replacement Issues:
- If an incompatible oscillator is installed, the U2 PRO may not function. This will not damage the device. Revert to a compatible oscillator or the original one.
- Ensure proper soldering techniques are used during replacement.
- OTG Connection Issues with Phones:
- For iPhones/iPads with a Lightning port, a high-current camera kit is required.
- Newer models with a Type-C port should work directly with the included cable.
- Ensure your phone supports OTG functionality.
8. Specifications
| Parameter | Value |
|---|---|
| Brand | Douk Audio |
| Model | U2 PRO |
| Audio Input | USB Type-C |
| Audio Output | Coaxial/Optical/HDMI-IIS |
| USB Chip | XMOS XU316 |
| Output Mode Switch | UAC 1.0/UAC 2.0 |
| Max. Sampling Rate (Coaxial/Optical) | PCM: 44.1kHz-192kHz/16Bit-24Bit, DSD: DOP DSD64 |
| Max. Sampling Rate (IIS) | PCM: 44.1kHz-768kHz/16Bit-32Bit, DSD (Native): 64-512, DSD (DOP): 64-256 |
| Operating Systems (PC-USB) | W10/W11/Mac OS/Android/iOS/PS5/Switch |
| Jitter | 75ps (typical) |
| THD+N | 0.000008% |
| Working Voltage | DC 5V |
| Dimensions (W*D*H) | 85*79*26mm / 3.35*3.11*1.02in |
| Net Weight | 220g / 0.44lb |
| Package Weight | 400g / 0.88lb |
9. User Tips
- Many users report a noticeable improvement in sound quality, with a cleaner, wider soundstage and better instrument separation.
- Expect cleaner and more impactful treble, more present vocals, and overall clearer music.
- The U2 PRO can bring greater precision to sound, with more well-rounded bass, cleaner reverb and decay, and more surgical and extended highs.
- If you don't currently use a Digital-to-Digital Converter (DDC) in your audio chain, consider adding the U2 PRO for a significant upgrade to your existing DAC.
- The device is compact but has a good weight, making it stable when placed on a rack.
- Experiment with different digital cables (e.g., high-quality coaxial or optical) to find the best synergy with your system.
10. Warranty and Support
For detailed warranty information, technical support, and further assistance, please refer to the comprehensive user manual included in your package. You can also find an electronic version of the user manual (PDF) at the following link: Douk Audio U2 PRO User Manual (PDF).