1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya DC1651M Double Channel Rolling Code Wall Switch Emitter Receiver. This device is designed to control Dooya Rolling Code RF Motors, commonly used in automated curtain and blind systems. Please read this manual thoroughly before use to ensure proper functionality and safety.
2. Safety Information
- Ensure all electrical connections are made by a qualified professional if wiring is required.
- Do not expose the device to water or excessive humidity.
- Keep out of reach of children.
- Only use with compatible Dooya Rolling Code RF Motors. Using with incompatible motors may cause malfunction or damage.
- Do not attempt to open or repair the device yourself. Refer to qualified service personnel.
3. Product Overview
The Dooya DC1651M is a double-channel wall switch designed for controlling two separate Dooya Rolling Code RF Motors. It features intuitive buttons for Up, Stop, and Down commands for each channel.



4. Specifications
| Feature | Specification |
|---|---|
| Model Number | Dooya DC1651M |
| Version | Rolling Code Version |
| Channels | Double Channel |
| Certification | CE |
| Wattage | 0 (Passive device, controls motor) |
| Battery Included | No |
| Origin | Mainland China |
| Product ID | ILCSDOOYAROLONIG02 |
| Package Dimensions (L x W x H) | 15cm x 15cm x 15cm |
| Package Weight | 0.3 kg |
5. Setup and Pairing
The DC1651M wall switch must be paired with compatible Dooya Rolling Code RF Motors to function correctly. Ensure your motor is a Rolling Code RF type, as this switch is not compatible with fixed code motors.
5.1. Initial Power-Up
- Connect the Dooya motor to its power supply.
- Listen for a beep sound from the motor, indicating it has powered on and is ready for pairing. The motor may also make a slight movement.
5.2. Pairing the Wall Switch with the Motor
The following steps outline the pairing process. A visual demonstration is available in the video below.
- After the motor powers on and makes a sound/movement, simultaneously press and hold the "UP" button and the "STOP" button on the DC1651M wall switch.
- Press these two buttons twice in quick succession. The motor should respond with a movement or sound after each press.
- Then, press the "UP" button once more. The motor should respond again, indicating successful pairing.
Note: If you are using an associated remote control, please ensure to purchase the required batteries from your local market as they are not included due to shipping restrictions.
6. Operating Instructions
Once paired, the DC1651M wall switch provides simple control over your Dooya Rolling Code RF Motors.
- UP Button (▲): Press to raise the connected curtain or blind.
- DOWN Button (▼): Press to lower the connected curtain or blind.
- STOP Button (■): Press to halt the movement of the connected curtain or blind at any desired position.
For double-channel models, each set of UP/STOP/DOWN buttons controls a separate motor or group of motors, allowing independent operation.
7. Maintenance
- Cleaning: Wipe the surface of the wall switch with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement (for associated remote controls): If you are using a separate remote control with this system, replace its batteries as needed. Refer to the remote control's specific manual for battery type and replacement instructions. The wall switch itself is typically wired and does not require battery replacement.
8. Troubleshooting
- Motor not responding:
- Ensure the motor is properly powered.
- Verify the wall switch is correctly paired with the motor (refer to Section 5).
- Check for any obstructions preventing motor movement.
- Inconsistent operation:
- Re-pair the wall switch with the motor.
- Ensure there are no strong sources of radio interference nearby.
- Wall switch not functioning:
- Check the wiring connections to the wall switch for proper installation.
- Compatibility issues:
- This wall switch is only compatible with Dooya Rolling Code RF Motors. It will not work with Dooya fixed code motors or motors from other brands.
9. User Tips
For optimal performance and longevity of your Dooya DC1651M wall switch and connected motors:
- Always ensure the wall switch is securely mounted and wired according to local electrical codes.
- If controlling multiple motors, consider grouping them on a single channel for synchronized operation, or use separate channels for independent control as needed.
- Regularly test the functionality of your automated curtain system to identify and address any issues promptly.
10. Warranty and Support
This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.
For any technical assistance, warranty claims, or further inquiries, please contact your original seller or authorized Dooya service provider. Please have your product model number (DC1651M) and any relevant purchase information ready when contacting support.