Cayin MT-35 MK2 BT-PLUS

Contents

Cayin MT-35 MK2 BT-PLUS Integrated Tube Amplifier

User Manual

1. Introduction

Thank you for choosing the Cayin MT-35 MK2 BT-PLUS Integrated Tube Amplifier. This high-fidelity audio component is designed to deliver exceptional sound quality through its vacuum tube amplification stage, offering both triode and ultralinear operating modes, along with modern Bluetooth connectivity. This manual provides essential information for the safe and optimal use of your amplifier.

Front view of the Cayin MT-35 MK2 BT-PLUS amplifier
Figure 1: Front view of the Cayin MT-35 MK2 BT-PLUS amplifier, showcasing the vacuum tubes, volume knob, input selector, and headphone jack.

2. Important Safety Instructions

Please read and follow all safety instructions carefully to prevent electric shock, fire, or damage to the unit.

  • Do not expose this appliance to rain or moisture.
  • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the appliance.
  • Only use attachments/accessories specified by the manufacturer.
  • Unplug this appliance during lightning storms or when unused for long periods of time.
  • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  • High Voltage Warning: Vacuum tube amplifiers operate with high voltages. Do not attempt to open the chassis or service the unit yourself.
  • Ensure proper ventilation around the amplifier to prevent overheating.
  • Keep out of reach of children.

3. Package Contents

Carefully unpack your amplifier and check that all items are present and in good condition. If any item is missing or damaged, please contact your dealer immediately.

  • Cayin MT-35 MK2 BT-PLUS Integrated Tube Amplifier
  • Power Cord
  • Remote Control (if included)
  • User Manual (this document)
  • Vacuum Tubes (EL34 x4, 5BK7A x3 - may be pre-installed or require installation)

4. Setup

4.1 Placement

Place the amplifier on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure there is adequate space around the unit for proper ventilation, especially above the vacuum tubes.

4.2 Tube Installation (if required)

If the vacuum tubes are not pre-installed, follow these steps:

  1. Carefully remove the tubes from their packaging.
  2. Identify the correct sockets for each tube type (EL34 x4, 5BK7A x3). Refer to the markings on the chassis.
  3. Align the pins on the tube base with the holes in the socket. Gently push the tube straight down until it is firmly seated. Do not force it.
  4. Ensure all tubes are securely installed before proceeding.

4.3 Connecting Speakers

Connect your speakers to the appropriate speaker output terminals on the rear panel. The MT-35 MK2 BT-PLUS offers 4Ω and 8Ω output impedance options. Match the amplifier's output impedance to your speakers' impedance for optimal performance.

  • Connect the positive (+) terminal of your speaker to the corresponding positive (+) terminal on the amplifier.
  • Connect the negative (-) terminal of your speaker to the corresponding negative (-) terminal on the amplifier.
  • Ensure all connections are secure to prevent short circuits.
Rear view of the Cayin MT-35 MK2 BT-PLUS amplifier with input and speaker terminals
Figure 2: Rear view of the amplifier, displaying input terminals (LINE1, LINE2, LINE3), speaker output terminals (4Ω, 8Ω), and the power input. Note the "INPUT" section for LINE connections and "RIGHT SPEAKER OUTPUT" / "LEFT SPEAKER OUTPUT" for speaker connections.

4.4 Connecting Input Sources

The amplifier supports multiple input sources:

  • Analog Inputs (LINE1, LINE2, LINE3): Use high-quality RCA cables to connect your audio sources (e.g., CD player, DAC, phono preamp) to the corresponding LINE input terminals on the rear panel.
  • Bluetooth (BT): For wireless audio streaming, select the "BT" input.

4.5 Power Connection

Connect the supplied power cord to the AC inlet on the rear of the amplifier, then plug the other end into a suitable wall outlet. Ensure the amplifier's power switch is in the OFF position before connecting to power.

5. Operation

5.1 Powering On/Off

  1. Ensure all connections are secure and the volume knob is set to minimum.
  2. Flip the power switch located on the side/rear of the amplifier to the ON position. The tubes will begin to warm up.
  3. Allow a few minutes for the tubes to stabilize before increasing the volume.
  4. To power off, turn the volume to minimum and then flip the power switch to the OFF position.
Side view of the Cayin MT-35 MK2 BT-PLUS amplifier showing the power switch
Figure 3: Side view of the amplifier, indicating the location of the power switch.

5.2 Input Selection

Use the "SELECTOR" knob on the front panel to choose your desired audio input: LINE1, LINE2, LINE3, or BT (Bluetooth).

5.3 Volume Control

Adjust the "VOLUME" knob on the front panel to control the output level. Start with a low volume and gradually increase it to a comfortable listening level.

5.4 Headphone Usage

Plug your headphones into the "PHONES" jack on the front panel. When headphones are connected, speaker output will typically be muted automatically.

5.5 Bluetooth Pairing

  1. Select "BT" as the input source using the selector knob.
  2. On your Bluetooth device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Select "Cayin HD BT" from the list of devices to pair.
  4. Once paired, you can stream audio wirelessly to your amplifier.
  5. The effective Bluetooth distance is approximately ≤10m.

5.6 Triode (TR) vs. Ultralinear (UL) Mode

The Cayin MT-35 MK2 BT-PLUS offers two distinct operating modes:

  • Triode (TR) Mode: Provides a warmer, more intimate sound with lower output power (18W+18W RMS). Ideal for sensitive speakers or when a more "tube-like" sound signature is desired.
  • Ultralinear (UL) Mode: Offers higher output power (35W+35W RMS) and a more dynamic, powerful sound. Suitable for less sensitive speakers or when more headroom is needed.

Consult your amplifier's front panel or specific controls for switching between these modes. (Note: The provided images do not clearly show a switch for TR/UL mode, so this instruction is general. Users should refer to their specific unit's controls).

6. Maintenance

6.1 Cleaning

To clean the amplifier, unplug it from the power outlet. Use a soft, dry cloth to wipe down the chassis. For stubborn marks, a slightly damp cloth can be used, followed by a dry cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.

6.2 Tube Care and Replacement

  • Tube Life: Vacuum tubes have a finite lifespan. The EL34 power tubes typically last longer than the 5BK7A preamp tubes, but this can vary based on usage.
  • Replacement: When tubes begin to degrade (e.g., reduced sound quality, increased noise, visible arcing), they should be replaced. Always replace tubes with the same type and ensure they are properly matched if required.
  • Handling: When handling tubes, always hold them by their base. Avoid touching the glass, as oils from your skin can create hot spots and shorten tube life.
  • Bias Adjustment: Some tube amplifiers require bias adjustment after replacing power tubes. Consult a qualified technician or the full service manual if you are unsure.

7. Troubleshooting

If you experience issues with your amplifier, please consult the following common troubleshooting steps before contacting support.

ProblemPossible CauseSolution
No sound output
  • Power not connected or switched on.
  • Incorrect input selected.
  • Volume too low.
  • Speaker cables loose or incorrectly connected.
  • Faulty audio source or cables.
  • Tubes not seated correctly or faulty.
  • Check power connection and switch.
  • Select the correct input source.
  • Increase volume gradually.
  • Verify speaker cable connections.
  • Test with a different audio source or cables.
  • Ensure tubes are fully seated. If problem persists, consider tube replacement.
Distorted sound
  • Volume too high.
  • Improper speaker impedance match.
  • Faulty tubes.
  • Poor quality audio source.
  • Reduce volume.
  • Ensure speaker impedance matches amplifier output.
  • Inspect and potentially replace tubes.
  • Try a different audio source.
Hum or noise
  • Ground loop issue.
  • Interference from other electronic devices.
  • Faulty tubes.
  • Poor quality cables.
  • Try plugging components into the same power strip or using a ground loop isolator.
  • Move amplifier away from other electronics.
  • Inspect and potentially replace tubes.
  • Use shielded, high-quality audio cables.
Bluetooth pairing issues
  • Device too far from amplifier.
  • Bluetooth not enabled on source device.
  • Amplifier not in BT input mode.
  • Ensure device is within 10m range.
  • Check Bluetooth settings on your source device.
  • Select "BT" input on the amplifier.

8. Specifications

ParameterValue
Rated Output Power (Triode - TR)18W + 18W (RMS)
Rated Output Power (Ultralinear - UL)35W + 35W (RMS)
Frequency Response8Hz - 55kHz (-3dB)
Harmonic Distortion1% (1kHz)
Signal to Noise Ratio89dB
Input Sensitivity300mV
Input Impedance100kΩ
Output Impedance4Ω, 8Ω
Headphone Output Impedance16Ω - 300Ω
Input TerminalsLINE1, LINE2, LINE3, BT (Bluetooth)
Dimensions (W x D x H)326mm x 272mm x 184mm
Vacuum Tubes Used5BK7A x3, EL34 x4
Net Weight13.5kg
Power Consumption260W
Bluetooth VersionV5.0
Bluetooth ChipCSR8675
Digital-to-Analog Converter (DAC) ChipES9018K2M SABRE32
Audio Transmission FormatsUAT, LDAC, AAC, SBC
Bluetooth Effective Distance≤10m
Bluetooth Device NameCayin HD BT

9. User Tips

  • Warm-up Time: Allow your tube amplifier at least 15-30 minutes to warm up for optimal sound performance.
  • Speaker Matching: Experiment with different speakers to find the best synergy with your tube amplifier.
  • Cable Quality: High-quality interconnects and speaker cables can significantly impact sound quality.
  • Power Conditioning: Consider using a power conditioner or surge protector to protect your amplifier from power fluctuations.
  • Tube Rolling: Advanced users may experiment with different brands or types of compatible vacuum tubes (known as "tube rolling") to fine-tune the sound signature. Always consult expert advice before attempting this.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your authorized Cayin dealer. Keep your proof of purchase for warranty claims.

© 2024 Cayin. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.