1. Introduction
Thank you for choosing the FDIK 2KW Diesel Air Parking Heater. This autonomous heating system is designed to provide efficient and reliable warmth for your vehicle. Featuring an aluminum body and an intuitive LCD display controller, it offers fast heating and energy-saving operation. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
2. Safety Information
- Ensure the heater is installed in a well-ventilated area if operated outside the vehicle.
- Do not operate the heater in enclosed spaces without proper exhaust ventilation.
- Keep flammable materials away from the heater and its exhaust pipe.
- Always use the specified fuel type (Diesel) and voltage (12V).
- Regularly inspect fuel lines, electrical connections, and exhaust system for leaks or damage.
- Do not attempt to repair the heater yourself if you are not qualified. Contact a professional.
- Ensure all connections are secure before operating the device.
3. Package Contents
The package typically includes the following components:
FDIK-V Series 2000W Heater and included accessories
- FDIK-V Series Aluminum Shell Heater (2KW or 5KW model)
- LCD Controller (C24 External Switch) x 1
- Remote Controller x 1
- Tubing x 1
- Exhaust pipe x 1
- Fuel Tank (2KW 5.0L x 1)
- Oil filter x 1
- 60mm Wind Head x 1
- Air filter x 1
- Silencer x 1
- Oil pump x 1
- Buckle x 4
- Wire Harness x 1
- Mounting accessories (screws, clamps, etc.)
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | FDIK |
| Model Name | FDIK-2KW |
| Item Type | Heating & Fans |
| Power (W) | 2000W |
| Voltage | 12V |
| Fuel | Diesel |
| Switch Type | LCD Switch |
| Special Features | Air heating |
| Material | Steel + Aluminum |
| Item Length | 34cm |
| Item Width | 12cm |
| Item Height | 12cm |
| Item Diameter | 6cm |
| Item Weight | 4.5kg |
| External Testing Certification | CE |
| Origin | Mainland China |
Note: The 5KW model has different dimensions:
Dimensions for 2KW and 5KW models
5. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your diesel heater. It is recommended to have this unit installed by a qualified professional.
5.1 Component Overview
Exploded view diagram of the heater with labeled parts and recommended installation locations. Key components include: Heating zone, Overheat protection device, Flame retardant impeller, Control box, Air fan, Glow plug, Combustion chamber, Motor assembly.
5.2 Recommended Installation Locations
Consider the following locations for optimal performance and safety:
- Under the feet of the co-pilot
- At the trunk of the car
Ensure sufficient clearance around the heater for air intake and exhaust, and that the exhaust pipe is routed safely away from flammable materials and vehicle occupants.
5.3 Electrical Connections
Electronic control board highlighting Universal Voltage, Overheating protection, and Temperature Mode.
Connect the heater to a 12V power source. Ensure all wiring is correctly sized and fused to prevent electrical issues. The system features universal voltage detection and overheating protection.
5.4 Fuel System Connection
Connect the fuel pump and fuel lines as per the diagram. Ensure all fuel connections are tight and leak-free. The fuel pump is designed for accurate, fuel-efficient, and durable operation, with over-temperature protection to reduce fuel consumption.
Internal components: variable frequency motor, silicon nitride ceramics for fast heating and high temperature resistance, 309S material casting for full combustion, and accurate fuel pump.
6. Operating Instructions (C24 Three-Key Digital Controller)
The C24 controller provides comprehensive control over your heater. Familiarize yourself with its interface:
LCD controller display with temperature and power protection indicators.
6.1 Quick Remote Matching
When the device is off, press and hold the up and down buttons simultaneously on the controller. The screen will display a 10-second countdown, entering remote control matching mode. Within 10 seconds, press any button on the remote to successfully pair it.
6.2 Operations in Power-On State
- Power On/Off: Press the Power On/Off button once to turn the device on. Press it again to turn it off.
- Air Conditioning Mode (Temperature Mode): While the device is on, press and hold the Power On/Off button for 3 seconds to switch to Temperature Mode, with a range from 10°C to 35°C. Use the Gear Increase and Decrease buttons to set the desired temperature. The set temperature must be higher than the current ambient temperature. When the device reaches the set temperature, it will reduce to a lower combustion speed. If the temperature is not reached, the device will increase the combustion speed to meet the set temperature.
- Power Mode: In Air Conditioning Mode, press and hold the Power On/Off button for 3 seconds to switch back to Power Mode. Adjust the power level using the Gear Increase and Decrease buttons, with levels P1 to P5 (5 levels).
6.3 Following Functions in Power-Off State
- Normal Power-On: In the off state, press and hold the Power On/Off button for 5 seconds. The screen will display "ON". Release the button to power on normally.
- Automatic Oil Pump Start: In the off state, press and hold the Power On/Off button for 5 seconds until the screen displays "Po". Release the button; the ignition plug will preheat for 1 minute before the oil pump starts. Once the oil line is full, the device will automatically ignite and enter normal combustion. If the oil line is not filled after one attempt and the fan is still running, the screen will display "Po" flashing. Press the Power On/Off button again to start a second oil pumping attempt.
- Ventilation Function: Press and hold the Power On/Off button until the screen displays “Fn”. Release the button; the screen will show "F1" to "F5" which can be adjusted to provide ventilation for the cabin.
- Remote Control Matching: Press and hold the Power On/Off button until the screen shows “R1”. Release the button, and within 10 seconds, press any button on the remote to successfully pair it.
- Manual Oil Pumping via Remote: Long press the 5th display icon on the screen of the power key, "rp". Release the button, and the screen will display "20", indicating the function will turn off after 20 minutes. Press the remote's power button to start oil pumping; press the remote's power button again to stop oil pumping. Note: 1. This function does not support ignition. Monitor the oil line and stop pumping once it is full. 2. After using this function, the paired remote needs to be re-matched.
- Language Selection and Do Not Disturb Mode: Long press the 6th display icon on the screen of the power switch, "LA". Release the button, then use the Gear Increase and Decrease buttons to select the language. The screen will display options such as “CH” (Chinese) or "BP" (Silent). Select the desired language by adjusting the knob to set it successfully.
- Emergency Start: If the device switch is damaged, first disconnect three switch wires (black, blue, and red). Short the black and blue wires together at a regular frequency 7 times (1-2-3-4-5-6), then do not release on the 7th time but hold for 1 minute. If the mainboard is not damaged, the device will start normally.
- Setting Temperature Mode and Oil Pump Flow: Disconnect the power switch wire. Then, press and hold the power switch button without releasing it. Next, reconnect the power switch wire. The screen will display "CF" followed by a number. Release the button. Multiply the displayed number by 5 and add 1. For example, if the number displayed is 2, then 2 * 5 + 1 equals 11. Press the up button to select the last digit (in this case, 1), then press the power switch button to enter the settings function. The first screen that appears is: Power Voltage, which sequentially shows 24V Power, -12V Power, and 0A Automatic Voltage. Press the power switch button to confirm in the 0A state. The voltage will automatically match. Next, the screen will show 22, which indicates a 22 oil pump. Press the up button to display 28, which indicates a 28 oil pump. Press the up button again to show 0A, which is for automatic oil pump matching. Select the desired oil pump flow rate and press the power switch button to confirm the oil pump setting. Once the oil pump is set, the screen will display "t5" to indicate the temperature mode shutdown function. "t----" turns off the temperature mode shutdown function. If you want to enable it, in the "t5" state, press the power switch button to confirm. After all settings are completed, the screen will display "5u" after 5 seconds and then shut down, indicating that all settings are completed.
- Clear Current Remote Configuration: Disconnect the switch wires, press and hold the Power On/Off button, and reconnect the switch wires. The screen will display "CF". Release the button, then press the Power On/Off button to clear the configuration.
7. Maintenance
- Regular Cleaning: Keep the heater's air intake and exhaust free from dust and debris.
- Fuel Filter: Check and replace the fuel filter periodically to ensure clean fuel supply.
- Visual Inspection: Regularly inspect all hoses, clamps, and electrical connections for wear, damage, or looseness.
- Battery Check: Ensure your vehicle's battery is in good condition, especially in cold weather, as the heater draws power from it.
8. Troubleshooting (FDIK C3 Fault Code Manual)
If your heater encounters an issue, the LCD display may show an error code. Refer to the table below for common problems and their solutions:
| Error Code | Problem | Solution |
|---|---|---|
| 0 | Panel failure | Replace the panel. |
| 1 | Ignition failure failed | Check if the fuel tank is low or empty. Check if the oil pump is stuck or abnormal. Verify the oil circuit for bubbles or continuity. |
| 2 | Flame out | Check for poor power supply, oil quality issues, oil path leaks, or bubbles. Ensure the fuel tank is not empty and the oil pump is functioning correctly. |
| 3 | The power supply voltage is incorrect (Under-voltage or over-voltage) | Verify the power cord is correctly connected and the voltage matches the machine's requirements. Check for secure connector insertion, good fuse box contact, and proper electrical cables. Ensure the power converter supplies enough current and stable output voltage. |
| 6 | Intake air over-temperature | Check if the room temperature is too high. Ensure there is no cycle of the machine's air outlet and inlet. Verify the installation space is not too narrow. |
| 7 | Oil pump problem | Check if the oil pump is properly connected. Inspect the connection line for open or short circuits. Ensure the 5-pin socket panel is plugged in correctly. |
| 8 | Fan (motor) Problem | Check for stuck fan blades. Verify the speed check is correct (motor repeats 3 times to report fault). Inspect for internal motor faults or if the motor socket is unplugged. |
| 9 | Ignition shorted plug | Check if the ignition pin is short-circuited or the connection wire is reversed. Inspect for insulation damage at the end of the ignition plug causing a short circuit or ignition plug leakage. |
| 10 | Overheat | Check for obstacles to air circulation or an obstructed air duct. Ensure the installation space is not too narrow. Verify if it's wrongly connected to an oil pump with a large flow rate or if the oil pump check valve is leaking. Check if the sensor is damaged. |
| 11 | Overheating sensor failure | Replace the overheat sensor. |
| 12 | Ignition plug open circuit | Check for poor contact of the ignition plug connector. Verify if the ignition plug is burned out and replaced. |
9. User Tips
- Fuel Pump Venting: If you experience issues with the heater not starting or inconsistent fuel delivery, you may need to vent the fuel pump. This process is often initiated automatically during the 'Automatic Oil Pump Start' sequence (see section 6.3, point 5). If 'Po' flashes, it indicates the oil line is not filled, and a second attempt may be needed.
- Remote Control Pairing: For convenience, ensure your remote control is correctly paired with the heater. Follow the 'Quick Remote Matching' instructions (section 6.1) or 'Remote Control Matching' (section 6.3, point 7) carefully.
- Voltage Compatibility: This heater is designed for 12V systems. Operating it with a 24V power source will likely cause damage and is not supported. Always confirm your vehicle's voltage before installation.
10. Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation. A user manual in PDF format is available for download at this link. This PDF contains additional guides and documents that may be helpful.
For technical assistance or service inquiries, please contact FDIK customer support through your purchase platform.