1. Introduction
Welcome to the CYSUM X-City 26" Electric Bike. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new electric bicycle. Please read it thoroughly before your first ride to ensure optimal performance and longevity of your e-bike.
2. Safety Information
WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and appropriate safety gear when riding.
- Familiarize yourself with local traffic laws and regulations regarding electric bicycles.
- Perform a pre-ride safety check before each use, including brakes, tires, and battery security.
- Do not operate the e-bike under the influence of alcohol or drugs.
- Avoid riding in adverse weather conditions or on slippery surfaces.
- Ensure the battery is securely locked in place before riding.
3. Package Contents
Your CYSUM X-City Electric Bike package should include the following items:
- CYSUM X-City 26" Electric Bike (partially assembled)
- 48V 10.4Ah Lithium Battery
- Battery Charger
- Front Basket
- Rear Rack
- Fenders (front and rear)
- Assembly Tools
- User Manual
4. Setup and Assembly
Your CYSUM X-City e-bike comes partially assembled. Follow these steps to complete the assembly:
- **Unpacking**: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- **Handlebar Installation**: Attach the handlebars to the stem, ensuring they are centered and tightened securely.
- **Front Wheel Installation**: If not pre-installed, attach the front wheel, ensuring the quick-release skewer or axle nuts are properly tightened. Verify disc brake alignment.
- **Pedal Installation**: Identify left (L) and right (R) pedals. Thread the left pedal counter-clockwise and the right pedal clockwise into the crank arms. Tighten firmly with a wrench.
- **Seat Post Adjustment**: Insert the seat post into the frame and adjust the saddle height for a comfortable riding position. Ensure the quick-release lever is securely closed.
- **Battery Installation**: Insert the 48V 10.4Ah lithium battery into its designated compartment on the frame. Ensure it clicks into place and is locked with the key provided.
- **Front Basket and Rear Rack**: Attach the front basket and rear rack using the provided hardware. Ensure they are stable and securely fastened.
- **Fender Installation**: Install the front and rear fenders, ensuring they are properly aligned with the wheels and do not rub against the tires.
- **Initial Charge**: Fully charge the battery before your first ride. Refer to the 'Battery Charging' section for details.
Figure 4.1: Fully assembled CYSUM X-City Electric Bike.
Figure 4.2: Integrated battery compartment for easy installation and removal.
Figure 4.3: Front basket and headlight assembly.
5. Operating Instructions
5.1. Battery Charging
- Ensure the e-bike is turned off before charging.
- The battery can be charged while installed on the bike or removed for separate charging.
- Connect the charger to the battery charging port, then plug the charger into a standard wall outlet.
- The charger indicator light will typically show red during charging and turn green when fully charged.
- Do not overcharge the battery. Disconnect the charger once charging is complete.
5.2. Power On/Off and LCD Display
- To power on the e-bike, press and hold the power button on the LCD display unit.
- The Smart LCD Display Meter will show current speed, Pedal Assist System (PAS) level, battery level, and riding distance (ODO/TRIP).
- Use the '+' and '-' buttons to adjust settings or navigate menus.
- To power off, press and hold the power button again.
Figure 5.1: Smart LCD Display Meter.
Figure 5.2: LCD display functions including Speed, PAS Level, Battery Level, and Riding Distance.
5.3. Pedal Assist System (PAS)
- The CYSUM X-City features a pedal-assist system. The motor provides assistance as you pedal.
- Use the '+' and '-' buttons on the display to select your desired assist level (typically 0-5). Level 0 provides no assistance, while higher levels provide more power.
5.4. Gear Shifting (SHIMANO 7-speed)
- Your e-bike is equipped with a SHIMANO 7-speed transmission system.
- Use the shifter on the handlebar to change gears. Shift to lower gears for climbing hills and higher gears for flat terrain or downhill riding.
- Shift gears smoothly and avoid shifting under heavy load to prevent damage to the drivetrain.
Figure 5.3: SHIMANO 7-speed transmission.
5.5. Braking System
- The e-bike uses mechanical disc brakes for reliable stopping power.
- Apply both front and rear brakes simultaneously for effective and safe braking.
- Regularly check brake pads for wear and ensure brake levers are responsive.
Figure 5.4: Front and rear mechanical disc brakes.
5.6. Lights
- Your e-bike is equipped with a front headlight for improved visibility.
- Refer to the LCD display manual for specific instructions on how to turn the light on and off.
6. Maintenance
Regular maintenance is crucial for the safety and performance of your e-bike.
- **Battery Care**: Charge the battery regularly, even if not in use, to maintain its health. Avoid completely draining the battery. Store the battery in a cool, dry place when not in use.
- **Tire Pressure**: Check tire pressure before each ride. The recommended pressure for 26*1.95 tires is usually indicated on the tire sidewall.
- **Brake Inspection**: Regularly inspect brake pads for wear and replace them when necessary. Check brake cables for fraying or damage and ensure proper tension.
- **Chain Maintenance**: Keep the chain clean and lubricated to ensure smooth gear changes and prevent rust. The bike features chain protection to help prevent rust and corrosion.
- **General Cleaning**: Clean your e-bike with a damp cloth. Avoid using high-pressure washers directly on electrical components.
- **Fastener Checks**: Periodically check all bolts, nuts, and quick-release levers to ensure they are securely tightened.
- **Professional Service**: For complex repairs or electrical issues, consult a qualified e-bike technician.
Figure 6.1: Chain protection for drivetrain longevity.
7. Troubleshooting
Here are some common issues and their potential solutions:
- **Bike Not Turning On**: Check if the battery is fully charged and properly installed. Ensure all electrical connections are secure.
- **Motor Not Assisting**: Verify that the PAS level is set above 0. Check battery charge. Ensure all cables are connected.
- **Brakes Squealing**: This can be normal for new disc brakes. If persistent, clean the rotors and pads, or have them inspected by a professional.
- **Gear Shifting Issues**: Check the derailleur alignment and cable tension. Ensure the chain is clean and lubricated.
- **Reduced Range**: Ensure the battery is fully charged. Riding in higher assist levels, against strong winds, or with heavy loads can reduce range.
8. Specifications
Figure 8.1: CYSUM X-City Bike Dimensions and Weight (Purple Model).
Figure 8.2: CYSUM X-City Bike Dimensions and Weight (Green Model).
Figure 8.3: Motor power and top speed details.
| Feature | Specification |
|---|---|
| Model Number | X-City |
| Motor | 250W Rated (Brushless, peaks at 500W), up to 45N·M Torque |
| Battery | 48V 10.4Ah Lithium battery (Removable) |
| Range per Power | 40-60 km (Pure Electric), 80-100 km (Assist Mode) |
| Max Speed | <25 km/h |
| Wheel Size | 26 inches |
| Tires | 26*1.95 tire (All-terrain adaptive) |
| Brakes | Mechanical Disc Brakes (Front and Rear) |
| Speed System | SHIMANO 7-speed |
| Maximum Load | 150 kg |
| Recommended Rider Height | 155-185 cm |
| Net Weight | 27 kg |
| Gross Weight | 31 kg |
| Frame Material | Aluminum |
| Power Source | Lithium battery |
| Folded | No |
| Rated Passenger Capacity | One Seat |
| Style | Standard Type |
Figure 8.4: 26-inch all-terrain adaptive tires for various riding conditions.
9. User Tips
- **Removable Battery**: The 48V 10.4Ah lithium battery is designed to be easily disassembled and charged separately, offering convenience for charging indoors or securing the battery when parked.
- **Range Expectation**: The e-bike offers a range of approximately 40-60 km in pure electric mode and 80-100 km in pedal-assist mode. Actual range may vary based on terrain, rider weight, assist level, and weather conditions.
- **Luggage Rack Capacity**: While the overall maximum load capacity is 150kg, distribute weight evenly on the rear rack and avoid exceeding the bike's total load limit.
- **Comfort**: The suspension saddle is designed with springs for shock absorption, helping to reduce impact on your body during rides.
Figure 9.1: Suspension saddle for enhanced comfort.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact CYSUM customer service through the retailer where you purchased your e-bike. Keep your proof of purchase for warranty claims.