1. Introduction
The DOCREATE DC1036L is a 36W Uninterruptible Power Supply (UPS) designed to provide continuous power to your essential DC-powered devices such as WIFI routers, optical modems, network switches, and surveillance cameras. It ensures seamless operation during power outages with instantaneous switching and offers multiple voltage outputs for broad compatibility. This manual provides detailed instructions for safe and efficient use of your DC1036L UPS.

2. Key Features
- Instantaneous Switching: Provides seamless power transition during outages, ensuring no reboots, disconnections, or black screens for connected devices.
- Overheat Protection: Automatically shuts down DC output if internal circuit temperature exceeds 45°C, resuming once cooled.
- Replaceable Battery Design: Utilizes four easily removable flat-top 18650 batteries, allowing for convenient replacement and extended device life.
- High-Definition LED Display: Offers clear, at-a-glance information on current, temperature, voltage, and battery level, enabling easy monitoring of device status.
- Reverse Battery Protection: Detects incorrect battery polarity and disables power operation to prevent damage to the device.
- Multiple Output Voltage Interfaces: Supports common DC voltages (5V, 9V, 12V, 24V) for wide compatibility with various devices like routers, optical modems, switches, and NAS.

3. Package Contents
Please check the box for the following items:
- DOCREATE DC1036L UPS Unit x 1
- AC Power Cord x 1
- Dual DC Output Cable (Y-cable) x 1
- Screwdriver x 1
- Instruction Manual (English/Chinese) x 1

4. Specifications
| Parameter | Value |
|---|---|
| Product Name | Digital Display UPS |
| Model | DC1036L |
| Type | UPS Module |
| Input Voltage | AC 85-265V |
| Input Frequency | 50-60Hz |
| Total Output Power | 36W |
| Output Current | 16.4V/DC 2.5A |
| USB Output | 5V/2A |
| DC Output 1 | 5V/2A |
| DC Output 2 | 9V/2A |
| DC Output 3 | 12V/2A |
| LAN Output | 15/24V-1A |
| POE Output | 15/24V-1A |
| Battery Model | 18650 (flat-top) |
| Battery Quantity | 4 (not included) |
| Battery Capacity | >2000mAh per battery |
| Operating Temperature | 0°C-45°C |
| Humidity | 10%-90% RH |
| Product Size | 171*113*37mm |
| Net Weight | ≈446g |
| Display | LED |
| Shell Material | Fireproof ABS |
| Origin | Mainland China |

5. Setup Instructions
To avoid malfunctions due to voltage mismatch or improper operation, please follow these steps:
- Step 1: Determine Operating Voltage and Current
Identify the operating voltage and current of your load device (e.g., common routers, optical modems, network switches). This information is usually marked on the device itself, typically 5V, 9V, or 12V. - Step 2: Connect Load Device
After confirming the voltage and current, connect the load device to the corresponding DC interface of the UPS. For example, if your device requires 5V, connect it to the 5V-DC interface of the UPS. Connecting to the wrong interface may cause damage. - Step 3: Install Batteries
When installing new batteries, ensure they are flat-top 18650 batteries with a capacity of at least 2000mAh. Carefully insert the batteries, ensuring the positive and negative poles are connected in the correct direction. Incorrect polarity will prevent the device from powering on.


6. Operating the Device
Instantaneous Switching
The DC1036L UPS is designed for true uninterruptible power. When a power outage occurs, the UPS immediately takes over the power supply to your connected devices. When grid power is restored, the device smoothly switches back to the original power source without any interruption, ensuring your devices continue to operate without restarting, disconnecting, or experiencing a black screen.

High-Definition LED Display
The integrated LED display provides real-time information about the UPS's operational status. You can monitor the battery level, internal temperature, output voltage (Vbat), and output electric current (Iout) at a glance. This allows for timely understanding of the device's performance and battery status.

7. Maintenance
Battery Replacement
The DC1036L features a replaceable battery design. To replace the batteries:
- Ensure the UPS is disconnected from the AC power source and all connected devices.
- Using the provided screwdriver, open the battery compartment.
- Carefully remove the old 18650 batteries.
- Insert new flat-top 18650 batteries (capacity >2000mAh), paying close attention to the correct positive (+) and negative (-) polarity markings.
- Close the battery compartment securely.
Regularly replacing the batteries can greatly extend the service life of your UPS.

8. Troubleshooting and Safety Features
Double Security Protection
The DC1036L UPS is equipped with multiple protection mechanisms to ensure safe and reliable operation:
- Overload Protection: If the output current becomes excessively large, the DC output will automatically shut down. The device will need to be restarted to resume output.
- Overtemperature Protection: If the device detects that the internal circuit temperature is too high (exceeding 45°C), it will automatically shut down the DC output. The temperature icon on the LED display will flash. Output will resume once the device has cooled down.
- Reverse Battery Protection: This feature automatically detects if the positive and negative poles of the batteries are connected incorrectly. It will prohibit power operation to prevent damage to the UPS and ensure user safety.

9. User Tips
- Battery Compatibility: Always use flat-top 18650 batteries with a capacity greater than 2000mAh for optimal performance and safety.
- Correct Polarity: Double-check battery polarity during installation to avoid triggering the reverse battery protection.
- Voltage Matching: Before connecting any device, verify its required input voltage and connect it to the corresponding output port on the UPS.
10. Frequently Asked Questions (FAQ)
- Q: Are batteries included with the DOCREATE DC1036L UPS?
- A: No, the DC1036L UPS does not come with batteries. You need to purchase four flat-top 18650 batteries separately.
- Q: What type of batteries does it use?
- A: It uses four flat-top 18650 lithium-ion batteries, each with a recommended capacity greater than 2000mAh.
- Q: What happens if I connect the batteries incorrectly?
- A: The device features reverse battery protection, which will automatically detect incorrect polarity and disable power operation to prevent damage to the unit.
11. Warranty and Support
For detailed warranty information, technical support, or assistance with your DOCREATE DC1036L UPS, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.