Freeman FM315

Contents

Freeman FM315 10.5 Gauge Pneumatic Fencing Stapler User Manual

Model: FM315 | Brand: Freeman

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Freeman FM315 10.5 Gauge Pneumatic Fencing Stapler. Please read these instructions carefully before using the tool to ensure proper function and to prevent injury.

Product Specifications

SpecificationDetail
Model NumberFM315
TypeFencing Stapler
Fastener Type10.5 Gauge Fencing Staples
Fastener Range22 ~ 40 mm (7/8" ~ 1 9/16")
Min Fastener Length22mm (7/8")
Max Fastener Length40mm (1-5/8")
Fastener Shank Diameter2.7x3.25mm
Operating Pressure70 ~ 115 psi
Magazine Capacity50 pcs
Dimensions310 x 85 x 297 mm
Net Weight2.3 kg
DIY SuppliesElectrical
ApplicationsField fencing, farm fencing, heavy mesh fencing; etc.
ElectronicNo
High-concerned chemicalNone
Warranty1 year

The Freeman FM315 is a next-generation 10.5 Gauge Fencing Stapler designed for contractor-grade performance. It features upgraded internal parts, a built-to-last construction, tool-free depth adjustment, and a lightweight design.

Freeman FM315 Pneumatic Fencing Stapler with key features and staple dimensions

Freeman FM315 Pneumatic Fencing Stapler with key features and staple dimensions.

Setup

Safety Precautions

  • Always wear safety glasses and hearing protection when operating the stapler.
  • Ensure the air compressor is turned off and disconnected before performing any adjustments or maintenance.
  • Never point the tool at yourself or others.
  • Keep hands and body parts clear of the stapler's discharge area.

Connecting to Air Supply

  1. Ensure your air compressor is capable of providing the recommended operating pressure (70-115 psi).
  2. Connect the air hose to the stapler's air inlet. Ensure a secure connection to prevent air leaks.
  3. Turn on the air compressor and allow it to reach the desired operating pressure.

Loading Staples

  1. Ensure the stapler is disconnected from the air supply.
  2. Open the magazine latch.
  3. Insert a strip of 10.5 gauge fencing staples into the magazine, ensuring the staple points face forward.
  4. Close the magazine latch securely.

Adjusting Depth

The FM315 features a tool-free depth adjustment mechanism. Locate the depth adjustment dial or lever on the tool and rotate it to achieve the desired staple depth for your application. Test on a scrap piece of material before actual use.

Detailed view of Freeman FM315 features: Depth Adjust, Quick Release Nose, Lightweight, Wire Alignment Notch, Textured Rubber Grip, Powder Coated Exterior.

Detailed view of Freeman FM315 features, including the Depth Adjust mechanism.

Operating Instructions

General Operation

  1. Connect the stapler to the air supply and ensure proper pressure.
  2. Load staples into the magazine.
  3. Place the nose of the stapler firmly against the workpiece where the staple is to be driven.
  4. Depress the trigger to fire a staple.
  5. Release the trigger after each staple.

Applications

The Freeman FM315 is ideal for heavy-duty mesh and woven applications such as electrified single wire with insulation, hog and cattle fencing, pet enclosures, deer prevention, vineyard trellising, and snow control fencing.

Various construction applications for the Freeman FM315 Fencing Stapler, including field, farm, and heavy mesh fencing.

Various construction applications for the Freeman FM315 Fencing Stapler.

Maintenance

Daily Maintenance

  • Disconnect the air supply before any maintenance.
  • Add a few drops of pneumatic tool oil into the air inlet at the beginning of each workday or after every 2 hours of continuous use.
  • Drain moisture from the air compressor tank daily.

Cleaning and Inspection

  • Keep the tool clean and free of debris. Use a dry cloth to wipe down the exterior.
  • Inspect the magazine and nose for any staple residue or foreign objects.
  • Check all screws and fasteners for tightness. Tighten as necessary.
  • Examine the air hose for wear or damage. Replace if compromised.
Internal components of the Freeman FM315, highlighting Ultra-Durable Magnesium Body and One-Piece Hardened Steel Drive Blade.

Internal components of the Freeman FM315, showing the durable construction.

Troubleshooting

Common Issues and Solutions

  • Stapler not firing:
    • Check air pressure; ensure it's within 70-115 psi.
    • Verify staples are loaded correctly and the magazine is closed.
    • Inspect for jams in the nosepiece.
  • Staples not driving fully:
    • Increase air pressure.
    • Adjust the depth setting to a deeper penetration.
    • Ensure the correct staple size and type are being used.
  • Stapler jamming frequently:
    • Disconnect air supply.
    • Utilize the Quick Release Nose feature to clear jammed staples.
    • Ensure staples are not bent or damaged before loading.
    • Lubricate the tool regularly.
  • Air leaks:
    • Check all air connections for tightness.
    • Inspect the air hose for cuts or damage.
    • If leaks persist, contact customer support.
Detailed view of Freeman FM315 features, including the Quick Release Nose for clearing jams.

The Quick Release Nose feature allows for easy clearing of jammed staples.

User Tips

  • Always use staples that are compatible with the 10.5 gauge specification of this tool.
  • Maintain consistent air pressure for optimal performance and staple depth.
  • Regularly check the wire alignment notch to ensure accurate fastener placement.
  • Store the stapler in a dry, clean environment when not in use.
  • For prolonged use, take short breaks to reduce fatigue, as the tool is designed to be lightweight and well-balanced.

Warranty and Support

Warranty Information

The Freeman FM315 Pneumatic Fencing Stapler comes with a 1-year warranty. Please retain your proof of purchase for warranty claims.

Quality Assurance

Our products have obtained numerous certifications, including CE, GS, UL, Intertek, SGS, TUV Rheinland, RoHS, and UKCA, ensuring high quality and safety standards. We maintain test labs and QC teams to control quality during and after production.

Certifications and patents for Global Link products, including Intertek, SGS, TUV Rheinland, CE, GS, ETL, RoHS, and UKCA.

Certifications for Global Link products, ensuring quality and safety.

Customer Support

For any questions, technical assistance, or warranty claims, please contact our customer support. We are committed to providing efficient and effective consultation and service.

You can reach us via Whatsapp: +86 17377784765

The Freeman brand is part of Global Link, a professional tool manufacturer dedicated to customer satisfaction.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.