1. Introduction
Thank you for choosing the BRPOM Portable Car Jump Starter. This device is designed to provide emergency jump-starting for 12V vehicles, act as a portable power bank for electronic devices, and offer an LED flashlight with multiple modes. Please read this manual carefully before use to ensure safe and effective operation.
2. Important Safety Information
- Always ensure the jump starter is fully charged before use.
- Do not attempt to jump start a frozen battery.
- Do not connect the positive and negative clamps together.
- Do not immerse the unit in water.
- Keep out of reach of children.
- Operate in a well-ventilated area.
- If the unit becomes excessively hot during use, disconnect immediately and allow it to cool.
- Always remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
3. Package Contents
Please check the package for the following items:
- BRPOM Portable Car Jump Starter Unit
- Smart Jumper Clamps
- USB-C Charging Cable
- User Manual
4. Product Overview
Familiarize yourself with the components of your BRPOM Jump Starter:
- LED Light: Provides illumination, strobe, and SOS signals.
- Large LCD Screen: Displays battery percentage and output status.
- 12V Jump Starter Plug: Connects to the smart jumper clamps.
- Type-C Input: For charging the jump starter unit.
- QC3.0 USB Output: For charging external electronic devices.
- Power Button: To turn the unit on/off and cycle through LED modes.
5. Specifications
| Feature | Description |
|---|---|
| Peak Current | >1200 A (Available in 3000A, 4000A, 6000A models) |
| Voltage | 12 V |
| Battery Capacity (mAh) | > 30000 |
| Number Of Built-in Batteries | 4 |
| Conversion Rate | >90% |
| Special Features | USB, Lighting, Warning Light, SOS Lighting |
| Fast Charge | None (QC3.0 USB Output for devices) |
| External Testing Certification | CE, FCC, UL |
| Operating Temperature | -20℃ to +80℃ |
| Dimensions (approx.) | 19.20cm (7.50in) x 8.90cm (3.50in) x 4.00cm (1.50in) |
6. Charging the Jump Starter
Before first use, fully charge the jump starter. It is recommended to recharge the unit every 3-6 months to maintain battery health.
- Connect the provided USB-C charging cable to the Type-C input port on the jump starter.
- Connect the other end of the USB-C cable to a USB wall adapter (not included) or a car charger.
- The LCD screen will display the charging progress. The unit is fully charged when the screen shows 100%.
7. Operating Instructions
7.1. Jump Starting a Vehicle
Follow these steps to safely jump start your vehicle:
- Open the Car Hood: Ensure your vehicle is in Park (P) or Neutral (N) and the parking brake is engaged.
- Connect Clamps to Jump Starter: Plug the smart jumper clamps securely into the 12V jump starter plug on the BRPOM unit. Ensure a tight connection.
- Connect Clamps to Car Battery:
a. Connect the RED (+) clamp to the vehicle battery's positive (+) terminal.
b. Connect the BLACK (-) clamp to the vehicle battery's negative (-) terminal. - Check Indicator: The smart clamp indicator light will show the connection status. A solid green light indicates a safe and ready connection.
- Start Vehicle: Once the connection is secure and safe, start your vehicle's engine.
- Remove Clamps: After the vehicle starts, immediately remove the smart clamps from the car battery, then disconnect them from the jump starter unit.
Video 7.1: Demonstration of jump-starting a car with the BRPOM Jump Starter.
7.2. Using as a Portable Power Bank
The BRPOM Jump Starter can charge various electronic devices:
- Connect your device's USB charging cable to the QC3.0 USB output port on the jump starter.
- The jump starter will automatically begin charging your device. The LCD screen will show the remaining battery percentage.
7.3. Using the LED Light
The built-in LED light has three modes: Flashlight, Strobe, and SOS.
- Press and hold the Power Button for 3 seconds to turn on the flashlight.
- Press the Power Button once to cycle to Strobe mode.
- Press the Power Button again to cycle to SOS mode.
- Press the Power Button one more time to turn off the LED light.
8. Maintenance
- Store the jump starter in a cool, dry place away from direct sunlight.
- Avoid exposing the unit to extreme temperatures or humidity.
- Recharge the unit at least once every 3-6 months to prolong battery life, even if not in use.
- Clean the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasives.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle won't start | Jump starter battery is low | Recharge the jump starter to 100%. |
| Vehicle won't start | Clamps not connected properly | Ensure clamps are securely attached to the correct battery terminals. Check smart clamp indicator light. |
| Vehicle won't start | Vehicle battery is severely damaged or frozen | Consult a professional mechanic. Do not attempt to jump start a frozen battery. |
| Jump starter not charging | Charging cable or adapter faulty | Try a different USB-C cable and/or wall adapter. |
| LED light not working | Jump starter battery is low | Recharge the jump starter. |
10. User Tips
- For optimal performance, always ensure the jump starter is fully charged before heading out on a trip, especially in cold weather.
- Keep the smart jumper clamps clean and free of corrosion for reliable connections.
- The compact size makes it easy to store in your glove compartment or trunk, ensuring it's always available for emergencies.
- Remember to disconnect the jump starter promptly after your vehicle starts to prevent damage to the unit or the vehicle's electrical system.
11. Warranty & Support
Your BRPOM Portable Car Jump Starter comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or the official BRPOM website.
