BAJETON BJ-9000

Contents

BAJETON BJ-9000 GPS APRS Walkie Talkie User Manual

Model: BJ-9000

1. Introduction

This manual provides detailed instructions for the BAJETON BJ-9000 GPS APRS Walkie Talkie. It covers essential information for safe and efficient operation, including setup, basic functions, advanced features, maintenance, and troubleshooting. Please read this manual thoroughly before using your device.

1.1 Key Features

  • Wide Frequency Range: Supports CB (27Mhz TX/RX), FM (64-108MHz RX), SW (2.3-30MHz RX), MW (520-1710KHz RX), LW (153-279KHz RX), 18-64MHz TX/RX, 136-520MHZ TX/RX, and RX (AM/FM/SSB) 18-620MHz, 840-999MHz.
  • Integrated GPS & APRS: Real-time GPS positioning and APRS location sharing for outdoor activities and rescue operations.
  • Cross Band Repeater: Flexible switching between VHF and UHF frequency bands for extended communication range.
  • 10W Tri-power Output: Adjustable transmission power (1W, 5W, 10W) to suit various scenarios.
  • Bluetooth Programming: Convenient wireless programming via a mobile app (iOS/Android).
  • Spectrum Analyzer: Quickly identifies signal strength and avoids frequency collisions.
  • NOAA Weather Radio: Supports NOAA weather reception.
  • Wireless Frequency Copy: Instantly copies frequency and CTCSS from another radio.
  • 2.4-inch HD Large Color Screen: Clear display for easy navigation and information viewing.
  • VOX Function: Voice-activated transmission for hands-free operation.
  • Customizable Buttons: PF2, PF3 custom buttons for various functional options.
  • Type-C Charging: Compatible with most Type-C chargers and power banks for fast and stable charging.
  • 2800 mAh Battery: High-capacity rechargeable Li-ion battery for long-term communication.

1.2 Package Contents

Your package should contain the following items:

  • BAJETON BJ-9000 Walkie Talkie
  • Antenna
  • Rechargeable Li-ion Battery (2800 mAh)
  • Charging Dock
  • Power Adapter
  • Type-C USB Cable
  • Belt Clip
  • User Manual (PDF available for download, see section 7.1)

For a visual overview of the product and its features, please watch the following video:

Product Overview: BAJETON BJ-9000 Walkie Talkie

2. Getting Started

2.1 Charging Instructions

Ensure your walkie talkie is fully charged before first use.

  1. Dock Charging (Optional): Insert the battery pack or the radio with the battery pack into the charging dock. Ensure proper contact with the charging terminals of the dock.
  2. Type-C Charging: Connect the provided charging cable to the power adapter and plug the power adapter into an AC power outlet. Insert the charging cable into the Type-C interface of the main unit's battery.
  3. Charging Indicator: When the device is charging, the red indicator light indicates charging in progress. The green indicator light indicates charging is complete.
Type-C Charging Port

Type-C Charging Port

2.2 Power On/Off

  • Power On: Rotate the Channel Knob/Power Switch/Volume Knob clockwise until a "click" is heard.
  • Power Off: Rotate the Channel Knob/Power Switch/Volume Knob counterclockwise until a "click" is heard.
  • Volume Adjustment: Rotate clockwise to increase volume; rotate counterclockwise to decrease volume.

2.3 Menu Navigation

From the home screen, briefly press the [OK] key to enter the menu. Use the arrow Direction keys to navigate. Press [OK] again to confirm selections. Press [V/M] to exit the menu.

3. Basic Operations

3.1 Frequency/Channel Mode Toggle

On the standby screen, briefly press the [V/M] key to switch between Frequency Mode (VFO) and Channel Mode (MR). Note: If no valid channels are stored, switching to Channel Mode is disabled.

3.2 Primary/Secondary Frequency Toggle

On the standby screen, briefly press the [A/BC] key to select the primary frequency highlighted in blue background. Non-highlighted frequencies are secondary.

3.3 Side Key Configuration

Side keys can be configured via programming software. Supported functions include RADIO, MONI, SCAN, SEARCH, SOS, SPECTRUM, and Beacon TX.

3.4 Voice-Activated Transmission (VOX) Function

When enabled (Menu → VOX), the radio automatically enters transmit mode if the microphone detects sufficient sound input. Adjustable VOX sensitivity level via menu settings. VOX delay time must be configured to maintain transmission continuity.

3.5 Sweep Function

Assign a side key function as "Sweep" or long-press [OK] to quickly enter sweep mode. It detects the transmitter's carrier frequency and CTCSS/DCS (sub-tone) information, displaying them on the screen. Once the carrier frequency is detected, press the [OK] key to save the scanned frequency to a specified channel list. Supported Ranges: VHF: 136-174 MHz, UHF: 400–520 MHz.

3.6 CTCSS/DCS Settings

Operation: Menu → CTCSS/DCS. Select desired DCS code or CTCSS frequency.
Function: Enables selective call reception by filtering out unwanted noise signals.

3.7 Scan Function

Side Key Shortcut: Assign a side key as the Scan Key.
Configure via: Menu → Radio → Scan Mode.

  • Channel Mode: Scans the channels listed in the channel memory (requires power-on scan to add).
  • Frequency Mode: Scans frequencies based on the selected step setting.
  • Time Mode: Resumes scanning if no operation is performed within 5 seconds after detecting a carrier signal.
  • Carrier Mode: Stops scanning upon detecting a carrier signal and resumes scanning 5 seconds after the carrier disappears.
  • Search Mode: Stops scanning immediately upon detecting a carrier signal.

3.8 PTT-ID Function

DTMF transmit identity S-CODE or PTT-ID.

  • Call Codes (15 preset groups): Menu → Signaling → S-CODE. Assign unique call codes to each segment (A/B/C) or signal type.
  • ID Code Setup: Menu → Signaling → PTT-ID.
  • Transmission Modes:
    • Send on Press: After pressing the PTT, the call code/identity code is sent first, followed by the voice signal.
    • Send on Release: After releasing the PTT, the call code/identity code is sent, then the transmission ends.
    • Send Both: The call code/identity code is sent both when the PTT is pressed and released.

3.9 FM Radio Function

Customize the side key as a radio shortcut or long pressing a number key to enter radio mode.

  1. Short press [OK] to access the radio menu and select modulation mode. Set the radio frequency directly using the numeric keys.
  2. In radio mode, press [V/M] to toggle between Frequency Mode (VFO) and Channel Mode (MR).
  3. In Frequency Mode, short press the [#] key to activate auto-scan for stations.
FM Radio Function Menu
MenuSecond MenuThird level menu
Frequency modeFMFM channel save (CH-01~CH-15), AM channel save (CH-01~CH-15)
AMFrequency range (LW Band, MW Band, SW Band)
Channel modeFMFM channel save (CH-01~CH-15)
AMAM channel save (CH-01~CH-15)

4. Advanced Features

4.1 APRS & GPS

The BAJETON BJ-9000 features built-in APRS (Automatic Packet Reporting System) and GPS for real-time location sharing and monitoring. This is particularly useful for outdoor sports, activity safety, and rescue operations.

How to Use APRS & GPS:

  1. Open the menu and select "APRS Set".
  2. Enable APRS and GPS (APRS ON/OFF, GPS ON/OFF).
  3. Determine the time zone.
  4. Choose between "Fixed Position" or "GPS Position" as needed.
  5. Customize side keys for quick access to APRS/GPS functions.

Instructional Video: How to Use APRS & GPS

Real-time GPS Positioning & APRS Location Sharing

Real-time GPS Positioning & APRS Location Sharing

4.2 Cross Band Repeater

The Cross Band Repeater function allows the radio to connect different frequency bands (e.g., U/V bands). It receives signals from one frequency band and converts/forwards them to another, enabling intercom communication across different frequencies and expanding the communication range.

Repeater Setup:

  1. Activating Repeater Mode: Menu → Radio → AB RPT-Mode → ON. The standby screen will display the repeater icon [Z].
  2. Repeater Requirements: Devices enabling the relay function must operate on different frequency bands.
  3. Repeater Direction Logic: In the default standby state, both primary and secondary frequencies act as receivers. If the primary frequency first receives a valid carrier signal, the secondary frequency automatically becomes the cross-band transmitter. Conversely, if the secondary frequency first receives a valid carrier signal, the primary frequency automatically becomes the cross-band transmitter.
  4. Speaker Audio Control: Configurable option to enable/disable local speaker audio during repeater operation.
Cross Band Repeater Diagram

Cross Band Repeater Functionality

4.3 10W Tri-power Output

The BJ-9000 offers adjustable transmission power (High, Medium, Low) to balance range and battery efficiency. The 10-watt output ensures long-distance communication, ideal for outdoor exploration and industrial use.

10W Tri-power Settings

Adjustable 1W, 5W, and 10W Power Output

4.4 Bluetooth Phone Programming

Program your walkie talkie conveniently via a mobile app. Simply pair your device with your smartphone to input and adjust frequencies, eliminating the need for complex cables.

Phone APP Wireless Programming Interface

Phone APP Wireless Programming Interface

Download the programming app by scanning the QR codes below:

QR Codes for iOS and Android Programming Apps

QR Codes for iOS and Android Programming Apps

4.5 Spectrum Analyzer

The built-in spectrum analyzer provides rich spectrum information and analysis functions, helping to identify and solve signal interference problems, thereby improving communication quality and efficiency.

Spectrum Analyzer Display

Spectrum Analyzer in Action

4.6 NOAA Weather Radio

The BJ-9000 supports NOAA weather reception, providing access to important weather alerts and information.

NOAA Weather Radio Feature

NOAA Weather Radio and FM Radio

4.7 Wireless Frequency Copy

Copy frequency and CTCSS from another radio instantly, simplifying setup and configuration.

Wireless Frequency Copy Function

Wireless Frequency Copy in Action

4.8 Emergency SOS Function

Assign a side key as the [Emergency Alarm] button.

  • Local Alarm: The device sounds an alarm tone locally without transmitting any signal.
  • Transmit Alarm Tone: Broadcasts the alarm tone via signal transmission.
  • Transmit Alarm Code: Sends the alarm code through signal transmission.

5. Icon Descriptions

The following table explains the various icons displayed on the walkie talkie screen:

IconDescription
VOXIndicates that the VOX function is enabled. Transmission starts when the microphone's sound pressure level reaches the set threshold.
APRSAutomatic Packet Report System.
MOIndicates that the monitor function is enabled.
TWTri-Watch Active, Simultaneously monitors 3 channels.
ABCKeypad Lock. Appears when the keypad is locked. Long press the # key to unlock.
AFrequency band selection, Band A / Band B / Band C.
RSSISignal Strength, Indicates the strength of the received signal.
ZGPS Switch & Indicator, Toggles GPS positioning with status icon.
ZRepeater Mode ON.
ZRepeater Mute Enabled, Speaker muted during repeater operation.
♪Side Tone Enabled, Indicates that the side tone function is active, producing a tone sound when transmitting DTMF.
Bluetooth Enabled.
Battery Status, Displays the remaining battery power. When the battery is nearly depleted, the outer frame of this symbol flashes, and transmission is prohibited.
Power Save Icon, Energy-saving mode active.
AStandby Indicator, Indicates the device is in standby/monitoring mode (continuously listening for signals).
CTAnalog Sub-audio Tone Indicator. This symbol indicates that the current sub-audio tone is an analog tone. When this symbol appears during transmission, it signifies that an analog sub-audio signal is being transmitted.
DCSDigital Sub-audio Tone Indicator. This symbol indicates that the current sub-audio tone is a digital tone. When this symbol appears during transmission, it signifies that a digital sub-audio signal is being transmitted.
HHigh Power Indicator. This symbol indicates that the current transmission power is set to high.
MMedium Power Indicator. This symbol indicates that the current transmission power is set to medium.
LLow Power Indicator. This symbol indicates that the current transmission power is set to low.
NNarrowband Mode Indicator. This symbol appears when the channel is operating in narrowband mode.
WWideband Mode Indicator. This symbol appears when the channel is operating in wideband mode.
+Frequency Mode (+ Frequency Offset). This symbol appears in frequency mode, indicating that the transmission frequency is the reception frequency plus a frequency offset.
-Frequency Mode (- Frequency Offset). This symbol appears in frequency mode, indicating that the transmission frequency is the reception frequency minus a frequency offset.
RFrequency Invert, Inverts RX/TX frequencies in Frequency Mode / Channel Mode.
TConfigures transceiver to operate on identical transmit/receive frequencies (simplex communication).
Encryption On, Indicates encryption function is activated.
AMAM Modulation, This icon indicates the current frequency is operating in AM (Amplitude Modulation) demodulation mode.
SCRScrambler Function: Activates voice encryption to prevent unauthorized monitoring of communications.

7. Maintenance

To ensure optimal performance and extend the lifespan of this product, please follow the guidelines below for daily maintenance and cleaning.

7.1 Daily Maintenance

  • Do not pierce or scratch the product with hard objects.
  • Do not store the product in environments containing chemical corrosive substances.
  • Do not carry or use the product by pulling the earphone cable.
  • When not using the earphone jack, cover the interface with the protective cap.

7.2 Cleaning Procedure

Before cleaning, please power off the device and remove the battery:

  1. Regularly use a dry, clean, lint-free cloth or a soft brush to remove dust from the product surface and charging terminals.
  2. If the buttons or casing become dirty, use a neutral detergent and a non-woven cloth for cleaning. Do not use detergents, alcohol, sprays, or petroleum-based chemicals as they may damage the surface casing.
  3. After cleaning, ensure the product is completely dry before use.

8. Troubleshooting & FAQ

8.1 Common Issues and Solutions

  • No TX in 27 MHz band or AM modulation: The radio supports TX/RX in the 27MHz band and AM/USB/LSB/CW reception. Ensure your antenna is compatible with the 27MHz frequency. If you are experiencing issues with AM modulation, verify the settings in the FM Radio Function menu.
  • No SSB (Single Sideband) functionality: The product description indicates AM/USB/LSB/CW reception. While it supports SSB reception, it may not support SSB transmission. Please refer to the detailed specifications or contact support for clarification on SSB transmission capabilities.
  • Programming App not working on Android: Ensure your Android device meets the minimum operating system requirements for the app. If you have an older Android version, the app may not be compatible. Try using a newer device or the PC programming software.
  • Difficulty finding PC programming software: The manual indicates that programming software is available. If you cannot locate it, please contact BAJETON customer support for the correct software and download instructions.
  • GPS position not displaying/reading: Ensure GPS is enabled in the APRS Set menu and that you have selected either "Fixed Position" or "GPS Position" as needed. Ensure you are in an open area with clear sky for optimal GPS signal reception.
  • Need for a dedicated programming cable: Yes, a dedicated programming cable is required for PC-based programming. This cable is typically sold separately or included in specific packages.
  • Antenna compatibility: The original antenna has a frequency range of FM/136-174/400-470MHz. For frequencies outside this range (e.g., 27MHz, 50MHz), you must purchase and use a specialized antenna compatible with the corresponding frequency.

9. Specifications

FeatureDetail
Brand NameBAJETON
Model NumberBJ-9000
Walkie Talkie TypePortable
Output Power (W)5W-10W (Tri-power adjustable)
Frequency RangeCB: 27Mhz TX/RX
FM: 64-108MHz RX
SW: 2.3-30MHz RX
MW: 520-1710KHz RX
LW: 153-279KHz RX
TX/RX: 18-64MHz, 136-520MHz
RX (AM/FM/SSB): 18-620MHz, 840-999MHz
DisplayYes (2.4-inch HD Large Color Screen)
Waterproof / Water-ResistantNo
Maximum Range5km-10km
Battery IncludedYes
Battery Capacity2800 mAh Li-ion
OriginMainland China
Package Length28 cm
Package Width23 cm
Package Height8 cm
Package Weight0.704 kg

10. User Tips

  • Antenna Selection: The original antenna covers FM/136-174/400-470MHz. For optimal performance on other frequency bands (e.g., 27MHz CB, 50MHz), it is crucial to use a specialized antenna compatible with that specific frequency.
  • Programming Software: If you encounter difficulties finding or using the programming software for PC, check online forums or contact BAJETON support. Some users have successfully used third-party software like Chirp in developer mode for programming.
  • Learning Curve: This radio offers many functions and options. Take your time to explore the menus and settings. YouTube tutorials can be a valuable resource for understanding complex features.
  • Clear Modulation: Users report very clear modulation and good reception, especially on UHF and VHF bands.
  • Solid Performance: The radio is noted for its solid performance and wide range in frequency and power, making it suitable for tourism, field work, and amateur radio activities.

11. Warranty & Support

11.1 Warranty Terms

The warranty period for this product starts from the date of sale (based on the date on the sales invoice). The main unit is covered for 12 months, and the battery and charging accessories are covered for 6 months. The following cases will require paid repair services during the warranty period:

  1. Failure to present this warranty card and the purchase invoice.
  2. This card shows signs of alteration or does not match the product.
  3. Defects and damages caused by using this product under non-standard conditions.
  4. Defects and damages caused by misuse, accidents, water ingress, or negligence.
  5. Defects and damages resulting from improper testing, operation, repair, installation, modification, or adjustment.
  6. Defects and damages caused by unauthorized repairs or disassembly.
  7. Defects and damages caused by force majeure.
  8. Normal wear and tear from regular use.

This warranty card serves as an important proof for the end user to enjoy warranty services. It must be stamped and filled out completely by an authorized dealer to be valid. Please keep it safe.

11.2 User Manual (PDF)

A detailed user manual in PDF format is available for download. This document provides comprehensive information on all features and operations.

Download PDF Manual: View User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.