Introduction
The POPDEER PD-JA3 is a versatile and powerful 4-in-1 device designed for automotive emergencies and general utility. It integrates a high-capacity jump starter, a 150PSI portable air compressor, a power bank with QC 3.0 output, and an LED flashlight. This manual provides essential information for the safe and effective use of your PD-JA3 device.
This device is capable of starting 12V vehicles with up to 10L gasoline or 8L diesel engines and can inflate tires to a maximum pressure of 150 PSI.
Safety Information
Your POPDEER PD-JA3 is equipped with 10 intelligent safety protections to ensure safe and stable operation. Always adhere to the following safety guidelines:
- Sparks Protection: Prevents sparks during connection.
- Reverse Charges Protection: Guards against incorrect charging.
- Low Temperature Protection: Ensures safe operation in cold conditions.
- Over Currents Protection: Protects against excessive current flow.
- Overload Protection: Prevents damage from exceeding capacity.
- High Temperatures Protection: Manages internal temperature for safety.
- Reverse Polarities Protection: Alerts and protects against incorrect battery terminal connection.
- Over Voltages Protection: Shields against voltage spikes.
- Short Circuits Protection: Prevents damage from short circuits.
- Over Charges Protection: Protects the battery from overcharging.
Always ensure the device is used within its specified operating temperature range of -20°C to +60°C for discharge and 0°C to +40°C for charging.

Product Overview and Components
The POPDEER PD-JA3 comes with several components to facilitate its various functions.
Package Contents:
- 1 x Jump Starter with Air Compressor (PD-JA3 unit)
- 1 x Smart Jumper Cable
- 1 x USB-C Cable
- 1 x Pump Hose
- 4 x Air Nozzles (various types for different inflation needs)
- 1 x Small Storage Box
- 1 x User Manual

Device Layout:
Familiarize yourself with the main parts of the PD-JA3 unit:

- Digital display screen
- Preset pressure reduction key
- LED lighting button
- Preset pressure plus key
- Mode/unit switch button
- Power/Start gas button
- Air pump interface
- Start the outlet (for jumper cables)
- Output (USB-A for charging devices)
- Input (USB-C for charging the unit)
- LED light
Specifications
| Feature | Specification |
|---|---|
| Brand | POPDEER |
| Peak Current | 5000A |
| Input | Type-C (5V/2A, 9V/2A) |
| Output | 5V/2.1A |
| Max Inflation Pressure | 150psi |
| Discharge Temperature Range | -20℃ to +60℃ |
| Charging Temperature Range | 0℃ to +40℃ |
| Dimensions (L*W*H) | 196.8*49.3*108.1 mm |

Setup
Initial Charging:
Before first use, fully charge your PD-JA3 unit. Connect the provided USB-C cable to the 'Input' port (10) on the device and to a suitable USB power adapter (not included). The digital display screen (1) will indicate the charging status. Ensure charging is done within the 0°C to +40°C temperature range.
Preparing for Use:
Ensure all accessories are present and in good condition. Store the device and its accessories in the provided storage box when not in use to protect them from damage.
Operating Instructions
1. Jump Starting a Vehicle:
The PD-JA3 can jump start 12V vehicles with up to 10L gas or 8L diesel engines. It can provide up to 60 starts per charge and has a lifespan exceeding 1500 uses.



- Ensure the PD-JA3 is sufficiently charged.
- Connect the smart jumper cable to the 'Start the outlet' (8) on the PD-JA3.
- Attach the red clamp to the positive (+) terminal of the vehicle battery and the black clamp to the negative (-) terminal.
- Ensure a secure connection. The smart jumper cable will indicate readiness.
- Start your vehicle. If the vehicle does not start immediately, wait a few minutes and try again.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect from the PD-JA3.
- If the vehicle battery voltage is less than 9V, press the "RST" button on the smart jumper cable to force a start.
2. Using the Air Compressor / Tire Inflator:
The integrated air compressor can inflate tires to 20 PSI within 2 minutes, with a maximum pressure of 150 PSI and a turbo boost of 35L/min. It features 4 nozzles and 4 preset modes for various items.

- Connect the pump hose to the 'Air pump interface' (7) on the PD-JA3.
- Attach the appropriate air nozzle to the pump hose and then to the item you wish to inflate (e.g., tire valve).
- Turn on the device. The digital display screen (1) will show the current pressure.
- Use the preset pressure reduction key (2) and preset pressure plus key (4) to set the desired pressure.
- Press the 'Power/Start gas button' (6) to begin inflation.
- The smart preset and auto-stop feature will automatically stop inflation once the target pressure is reached.
- Use the 'Mode/unit switch button' (5) to cycle through different units (PSI, KPA, BAR).
3. Power Bank Function:
The PD-JA3 can charge external devices via its 5V/2.1A USB output port (9).
- Connect your device's charging cable to the 'Output' port (9) on the PD-JA3.
- The PD-JA3 will automatically begin charging your device.
4. Flashlight and SOS Function:
The device includes an LED light (11) for illumination and an SOS signal function.
- Press the 'LED lighting button' (3) once to turn on the flashlight.
- Press again to cycle through different light modes (e.g., steady, strobe, SOS).
- Press a third time to turn off the light.

Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the PD-JA3 in a cool, dry place, away from direct sunlight and extreme temperatures. The optimal storage temperature is between 0°C and +40°C.
- Charging: For optimal battery life, recharge the device every 3-6 months if not in regular use.
- Thermal Management: The device features an enhanced honeycomb cooling configuration for superior heat dissipation. Ensure the vents are not obstructed during operation.

Troubleshooting
- Device not turning on: Ensure the device is fully charged. If the battery is extremely low, it may take a few minutes of charging before the display activates.
- Vehicle not starting: Check that the jumper cables are securely connected to the correct battery terminals. If the vehicle battery voltage is very low (below 9V), use the "RST" button on the smart jumper cable to override the low voltage protection and attempt to start.
- Air compressor not inflating: Verify that the pump hose and nozzle are securely attached to both the PD-JA3 and the item being inflated. Check the set pressure on the display.
- Device overheating: The PD-JA3 has a thermal management system. If it feels excessively hot, allow it to cool down before further use. Ensure vents are clear.
User Tips
- Regular Charging: Keep your PD-JA3 charged, especially before long trips, to ensure it's ready for emergencies.
- Check Tire Pressure Regularly: Use the built-in tire inflator to maintain optimal tire pressure, which can improve fuel efficiency and tire longevity.
- Understand Display Readings: Familiarize yourself with the digital display to quickly interpret battery level, pressure readings (PSI, KPA, BAR), and operational status.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Retain your proof of purchase for warranty claims.