1. Introduction
This manual provides detailed instructions for the JIKONG V19 4.3-inch LCD Smart Touch Screen Display. This display is designed to perfectly match with JIKONG V19 Home Energy Storage BMS (PB BMS) systems, offering a clear and convenient interface for monitoring and control.

Image 1: JIKONG 4.3 Inch LCD V19 display, indicating compatibility with JK-PB1A16S10P-V19, JK-PB1A16S15P-V19, JK-PB2A16S15P-V19, JK-PB2A16S20P-V19, and JK-PB2A16S30P-V19 BMS models.
2. Product Features
- Wide Power Supply Range: Supports a working voltage range of 9V to 36V (default).
- Comprehensive Display Content: Shows battery total voltage, battery power, and single series voltage.
- Communication: Supports TTL level communication with a default baud rate of 115200bps.
- Multi-language Support: Chinese, English, Thai, and Vietnamese language switchover is supported.
- Customizable Interface: Allows for language, logo, and general interface customization.
- Smart BMS Functionality: Designed as a SMART BMS with active balancing.
- Common Port: Utilizes a common port for charge and discharge.
- Protection Functions: Includes overcharge protection, over-discharge protection, overcurrent protection, and short circuit protection.
3. Specifications
| Parameter | Value |
|---|---|
| Display Category | TFT |
| Display Size | 4.3 inch |
| Resolution | 480*272 |
| Backlight Type/Brightness | LED/300nit |
| Viewing Angle (L/R/U/D) | 85°/85°/85°/85° |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -30°C to +80°C |
| Supply Voltage (with reverse protection) | 9V (Min) to 36V (Max) |
| Power Dissipation | 1.32W (at 12V@110mA) |
| Charging Current | 300A |
| Package Length | 21 cm |
| Package Width | 16 cm |
| Package Height | 5 cm |
| Package Weight | 0.25 kg |
4. Setup and Connections
4.1 External Interfaces
The display features specific connectors for power, serial communication, and BMS control.

Image 2: External interfaces of the 4.3-inch display.
- User Interface: Used for power supply and serial port signal connection. The socket type is HY2.0mm-6P vertical stick.
- Key Extension Interface: Used to control BMS startup and shutdown. The socket type is A1254WF-6A vertical sticker.
4.2 Pin Definition
The display end interface adopts HY2.0 mm-6P vertical mount. Refer to the table below for pin definitions:
| Number | Name | Definition |
|---|---|---|
| 1 | K- | Activation signal negative electrode |
| 2 | K+ | Activate the positive signal |
| 3 | GND | Negative terminal |
| 4 | TTL-RX | UART RX, 5V |
| 5 | TTL-TX | UART TX, 5V |
| 6 | VCC | Display power output |
4.3 Cable Diagram
The standard display cable length is 0.5 meters. Custom lengths may be available upon request.

Image 3: 4.3-inch Touch Screen Display with its 50mm display cable.

Image 4: Connection diagram showing the JIKONG V19 PB Serial BMS connected to the 4.3-inch Touch Screen Display via the UART Connector.
5. Operation Instructions
5.1 APP Operation
To ensure proper communication between the display and your BMS, configure the JiKong BMS APP:
- Open the JiKong BMS APP on your device.
- Navigate to the "Parameter Setting" page.
- Change the "Serial port 3 protocol" setting to "015-JK BMS PBxx SERIES LCD Protocol V1.0".

Image 5: JiKong BMS APP interface for selecting the communication protocol.
5.2 Display Interface Operation
The 4.3-inch touch screen display offers several interfaces for monitoring and configuration:
5.2.1 Battery Interface
This interface provides an overview of your battery system, displaying:
- Current voltage and current of the battery string.
- Number of online battery packs.
- Charging and discharging status of the entire battery string.
- Highest and lowest cell temperature.

Image 6: Top view shows the main battery interface with voltage, current, capacity, and temperature. Bottom view shows all cells pack information.
5.2.2 Battery Pack Interface
In parallel mode, you can select individual battery packs to view detailed information:
- Design capacity and remaining capacity of each battery pack.
- Charging and discharging status of each battery pack.
- Voltage of each cell within the pack.
Up to 16 battery packs can be displayed.

Image 7: Top view shows detailed individual cell pack information including voltage differences and charge/discharge status. Bottom view shows options for setting up RS485 and CANBUS protocols.
5.2.3 Protocol Selection Interface
This interface allows you to select the appropriate communication protocols for your system:
- Choose the corresponding 485 protocol.
- Choose the corresponding CAN protocol.
This ensures proper communication between the display and other components in your energy storage system.
6. Maintenance
To ensure the longevity and optimal performance of your JIKONG V19 4.3-inch LCD Smart Touch Screen Display, follow these general maintenance guidelines:
- Keep the display clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the display to extreme temperatures or direct sunlight for prolonged periods.
- Ensure all connections are secure and free from corrosion.
- Do not use harsh chemicals or abrasive materials for cleaning, as this may damage the screen or casing.
7. Troubleshooting
If you encounter issues with your JIKONG V19 4.3-inch LCD Smart Touch Screen Display, consider the following basic troubleshooting steps:
- No Display/Power: Check the power supply connections and ensure the voltage is within the specified 9-36V range. Verify the display cable is securely connected.
- Incorrect Readings: Ensure the correct communication protocol is selected in the JiKong BMS APP (015-JK BMS PBxx SERIES LCD Protocol V1.0). Check all wiring between the display and the BMS.
- Unresponsive Touch Screen: Gently clean the screen. If the issue persists, try restarting the system.
- Communication Errors: Verify the baud rate setting in the APP matches the default 115200bps. Check the integrity of the UART connection cable.
For more complex issues, please refer to the full user manual PDF or contact JIKONG customer support.
8. User Tips
No specific user tips are available from customer reviews or Q&A at this time. Always ensure proper wiring and configuration for optimal performance.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official JIKONG documentation or contact JIKONG customer service directly. Always ensure you are using the product within its specified operating parameters to maintain warranty validity.
10. Additional Documents
A comprehensive user manual in PDF format is available for download, providing more in-depth information on installation, operation, and advanced features. You can access the PDF manual here.