Introduction
Thank you for choosing the Homcom Wall-Mounted Electric Heater. This manual provides important information for the safe and efficient use of your new heater. Please read it thoroughly before installation and operation, and keep it for future reference.
This 2000W low consumption wall heater is designed to provide fast and efficient supplemental heating for your home, featuring PTC ceramic technology, multiple operating modes, and smart energy-saving functions.
Safety Instructions
Please read and understand all safety instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the heater is unplugged before cleaning or performing any maintenance.
- Do not cover the heater or block the air inlets/outlets at any time, as this can cause overheating and fire.
- Keep the heater away from water and do not operate it in wet or damp conditions. The heater has an IP23 waterproof grade, meaning it is protected against spraying water, but it is not fully submersible.
- Ensure the power cord is not damaged, pinched, or routed under carpets.
- Do not insert any objects into the openings of the heater.
- This appliance is equipped with overheating protection. If the heater overheats, it will automatically shut off. Unplug the unit, allow it to cool, and check for any obstructions before restarting.
- The heater features a child lock function for added safety.
- Use only with a secure, properly grounded plug and a power outlet that matches the specified voltage (220-240V, 50/60Hz).
- The heater is constructed with high temperature resistant materials, but surfaces can still become hot during operation. Avoid direct contact with hot surfaces.
Package Contents
- 1 x Homcom Wall-Mounted Electric Heater
- 1 x Remote Control
- 1 x Wall Mounting Kit (screws, anchors)
- 1 x Instruction Manual
Product Overview
The Homcom Wall-Mounted Electric Heater features a sleek design with a glass panel and an integrated LED display for easy operation and monitoring. It comes with a remote control for convenient adjustments.


Installation
This heater is designed for wall-mounting, saving valuable floor space. Follow these steps for proper installation:
- Choose a Location: Select a suitable wall location, ensuring it is away from curtains, furniture, and water sources. Maintain adequate clearance around the heater for optimal airflow and safety.
- Wall Suitability: Ensure the wall material can safely support the heater's weight and the mounting hardware.
- Mark Drilling Points: Use the provided mounting template (if applicable) or measure the heater's mounting points. Mark the drilling locations on the wall.
- Drill Holes and Insert Anchors: Drill holes at the marked points and insert the appropriate wall anchors.
- Secure Mounting Bracket: Attach the mounting bracket securely to the wall using the provided screws.
- Mount the Heater: Carefully lift the heater and hook it onto the mounting bracket. Ensure it is firmly seated and level.
- Connect Power: Plug the heater into a suitable electrical outlet. Ensure the power cable is not strained or obstructed.


Operating Instructions
The heater can be operated via the LED display on the unit or the included remote control.
Power On/Off
- Press the Power button on the unit or remote control to turn the heater on or off.
Adjusting Temperature
- Use the '+' and '-' buttons on the unit or remote control to set the desired temperature. The temperature range is 10-49°C.
Selecting Operating Modes
The heater offers three operating modes:
- Fan Mode: Circulates air without heating.
- Low Heat Mode (1000W): Provides moderate heating.
- High Heat Mode (2000W): Provides maximum heating power for quick warmth.
Press the 'MODE' button on the remote control or the corresponding button on the unit to cycle through these modes.

Programming and Timer
The heater features weekly programming and a 24-hour timer for automated operation.
- 24-Hour Timer: Use the 'TIMER' button on the remote control to set a countdown timer for the heater to turn off automatically. Consult the specific instructions in the remote control section of the full manual for detailed timer setting steps.
- Weekly Programming: The heater supports weekly programming to set specific heating schedules for different days. Refer to the detailed instructions in the full manual for setting up weekly programs.
Special Features
- PTC Ceramic Technology: The heater utilizes PTC ceramic heating elements for rapid and efficient heat generation, providing quick warmth to your space.
- 30° Oscillation: The heater features a 30° oscillation function to ensure better and more uniform heat distribution throughout the room.

- Open Window Detection: To prevent energy waste, the heater automatically detects if a window is open and temporarily pauses heating until the window is closed or the function is manually overridden.
- ERP Energy Efficiency: This heater meets ERP energy efficiency standards, designed to help reduce electricity consumption and lower your energy bills.
- Child Lock: A child lock feature is included to prevent accidental changes to settings, enhancing safety in homes with children.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Air Vents: Periodically check and clean the air inlets and outlets to ensure they are free from dust, lint, or other obstructions. A vacuum cleaner with a brush attachment can be used for this purpose.
- Storage: If storing the heater for an extended period, ensure it is clean and dry. Store it in a cool, dry place, preferably in its original packaging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply; Power button not pressed; Overheating protection activated. | Check if the heater is properly plugged into a working outlet. Press the Power button. Unplug the heater, let it cool down for 10-15 minutes, and check for obstructions. |
| Heater is on but no heat is produced. | Fan mode selected; Temperature setting too low. | Ensure a heat mode (Low or High) is selected. Increase the desired temperature setting above the current room temperature. |
| Remote control is not working. | Batteries are dead or incorrectly inserted; Obstruction between remote and heater. | Replace batteries, ensuring correct polarity. Remove any obstructions and ensure direct line of sight to the heater's receiver. |
| Heater suddenly turns off. | Overheating protection activated; Timer function activated; Open window detected. | Unplug, let cool, check for obstructions. Check if the timer is set. Close any open windows. |
Specifications
| Feature | Detail |
|---|---|
| Model Reference | 820-466V90WT |
| Color | White |
| Material | ABS, PA, Glass |
| Total Dimensions (LxWxH) | 54 x 18.7 x 12.3 cm |
| Air Outlet Dimensions (LxW) | 33 x 5.5 cm |
| Power | 1000W / 2000W |
| Recommended Coverage Area | 20-25 m² |
| Temperature Range | 10-49°C |
| Voltage/Frequency | 220-240V, 50/60Hz |
| Cable Length | 1.5 m |
| Waterproof Grade | IP23 |
| Remote Control Range | 3-5 m |
| Power Source | AC |
| Intended Use | Living Room |
User Tips
- To maximize energy efficiency, utilize the weekly programming and 24-hour timer functions to heat your space only when needed, avoiding continuous operation.
- Ensure the heater is installed in a location with clear space around it to allow for optimal heat distribution and effective use of the oscillation feature.
Warranty and Support
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.