Homcom 820-254

Contents

Homcom Wall-Mounted Bathroom Heater Instruction Manual

Model: 820-254 | Brand: Homcom

1. Introduction

Thank you for choosing the Homcom Wall-Mounted Bathroom Heater. This ceramic heater is designed to provide efficient and comfortable heating for your bathroom, bedroom, or any suitable area in your home. Featuring PTC technology for instant heat, multiple operating modes, an LED display, and remote control, it offers convenience and safety. Please read this manual thoroughly before installation and use, and keep it for future reference.

Important Safety Information:

  • Always ensure the heater is securely mounted to the wall before operation.
  • Do not cover the heater during operation. This can lead to overheating and fire hazards.
  • This appliance has an IPX2 rating, making it suitable for use in bathrooms where it is protected from splashing water. However, avoid direct water spray.
  • Ensure the power supply matches the specifications of the heater.
  • Keep children and pets away from the heater.
Homcom Wall-Mounted Heater with Remote Control
Homcom Wall-Mounted Heater and its remote control.

2. Product Overview

The Homcom Wall-Mounted Heater combines a sleek design with advanced heating features for optimal comfort.

Key Features:

  • Wall-Mounted Design: Space-saving and modern aesthetic.
  • PTC Technology: Provides instant and efficient heating.
  • Multiple Modes: Offers cold air, low heat (1000W), and high heat (2000W) settings.
  • LED Display: Clear indication of settings and temperature.
  • Remote Control: Convenient operation from a distance (CR2025 battery included).
  • 12-Hour Timer: Programmable shutdown for energy saving and convenience.
  • Adjustable Temperature: Set desired temperature between 10°C and 49°C.
  • Safety Features: Automatic overheating shutdown.
  • IPX2 Waterproof Rating: Suitable for splash-protected bathroom environments.
Homcom Wall-Mounted Heater installed in a living room
The heater's sleek design blends into various room settings.

3. Specifications

FeatureDetail
ColorWhite
MaterialABS and PP
Total Measurements (LxWxH)45 x 18.6 x 11.5 cm
Air Outlet Measurements (LxW)25.5 x 5 cm
Temperature Range10°C - 49°C
Power1000W / 2000W
Coverage Area20-25 m²
Cable Length1.5 m
Remote Control Range5 m (without obstacles)
Voltage / Frequency220-240V / 50Hz
Waterproof GradeIPX2
Model Reference820-254
Dimensional diagram of the Homcom Wall-Mounted Heater
Dimensions of the heater: 45 cm (Length) x 18.6 cm (Width) x 11.5 cm (Height).

4. Installation and Setup

This heater is designed for wall mounting. Professional installation is recommended to ensure safety and proper function.

Wall Mounting:

  1. Choose a suitable location on a wall, ensuring it is away from flammable materials, curtains, and direct water spray. Maintain adequate clearance around the heater for proper airflow.
  2. Mark the drilling points on the wall according to the heater's mounting holes. Refer to the dimensional diagram in the Specifications section for guidance.
  3. Drill holes and insert appropriate wall plugs (not included, choose based on wall material).
  4. Secure the mounting bracket (if separate) or the heater directly to the wall using screws. Ensure it is firmly attached and level.

Power Connection:

  • Ensure the heater's power switch is in the "OFF" position.
  • Plug the heater into a standard European 220-240V/50Hz electrical outlet. Ensure the outlet is properly grounded and can handle the heater's power requirements (up to 2000W).
  • Do not use extension cords or power strips unless absolutely necessary and rated for the heater's power.

5. Operating Instructions

The heater can be operated using the control panel on the unit or the included remote control.

Control Panel:

The LED display shows the current temperature and settings. Buttons on the unit allow for basic control.

Remote Control Functions:

The remote control provides full functionality. Ensure the CR2025 battery is correctly installed.

LED display and remote control buttons with functions
Overview of the heater's LED display and remote control functions.
  1. Power On/Off: Press the Power button (usually marked with a circle and a vertical line) to turn the heater on or off.
  2. Heating Mode Selection: Press the Heating Mode button (often represented by vertical bars or a fan icon) to cycle through cold air, low heat (1000W), and high heat (2000W).
  3. Temperature Adjustment: Use the '+' and '-' buttons (often accompanied by a thermometer icon) to set the desired temperature between 10°C and 49°C.
  4. Timer Setting: Press the Timer button (usually marked with a clock icon) to set the automatic shutdown timer for up to 12 hours. Each press typically increases the timer by one hour.
  5. Other Buttons: The remote may include additional buttons like SET, OK, DAY, P, TIME ON, TIME OFF, and EDIT for advanced programming or specific functions. Refer to the remote's markings for their exact use.
Image illustrating the 12-hour timer function for comfortable nights
Utilize the 12-hour timer for warm and comfortable nights.
Image showing heater coverage area and temperature range
The heater can warm an area of 20-25m² with a temperature range of 10-49°C.

6. Maintenance

Regular maintenance ensures the longevity and efficient operation of your heater.

Cleaning:

  • Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
  • Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Ensure the air inlet and outlet grilles are free from dust and debris. Use a vacuum cleaner with a brush attachment to gently clean these areas.
  • Never immerse the heater in water or any other liquid.

Storage:

  • If storing the heater for an extended period, clean it thoroughly as described above.
  • Store the heater in a cool, dry place, away from direct sunlight and moisture.
  • It is recommended to store the heater in its original packaging to protect it from dust and damage.

7. Troubleshooting

If you encounter any issues with your heater, please refer to the following common problems and solutions:

  • Heater does not turn on:
    • Check if the power cord is securely plugged into a working electrical outlet.
    • Ensure the main power switch on the unit is in the "ON" position.
    • Verify that there is power to the outlet by testing it with another appliance.
  • Heater turns off unexpectedly:
    • The heater may have activated its overheating protection. Unplug the unit, allow it to cool down for 30 minutes, and check for any obstructions around the air inlets or outlets. Remove any blockages before plugging it back in.
    • Ensure the room temperature has not reached the set temperature, causing the thermostat to turn off the heating element.
  • Heater is producing noise:
    • A slight fan noise is normal during operation, especially when circulating air.
    • If the noise is unusual or excessive, check for any loose parts or obstructions within the air vents.
  • Remote control is not working:
    • Check and replace the CR2025 battery in the remote control.
    • Ensure there are no obstacles between the remote control and the heater's receiver.
    • Make sure you are within the 5m operating range of the remote control.
  • Heater is not producing enough heat:
    • Ensure the heater is set to the "High Heat" (2000W) mode.
    • Check that the set temperature is higher than the current room temperature.
    • Verify that the coverage area (20-25 m²) is appropriate for the size of your room.

8. User Tips

  • Optimal Placement: For best results, install the heater in a central location within the desired heating area, ensuring proper air circulation.
  • Energy Saving: Utilize the 12-hour timer function to program the heater to turn off automatically when not needed, helping to conserve energy.
  • Bathroom Use: While IPX2 rated for splash protection, always ensure the heater is installed in a location where it won't be directly exposed to water jets or excessive humidity.
  • Remote Control Convenience: Keep the remote control accessible for easy adjustment of settings without needing to reach the unit.
  • Airflow: Regularly check that the air intake and output vents are clear of dust, lint, or other obstructions to maintain efficient heating and prevent overheating.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to your purchase documentation or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.