Introduction
Thank you for choosing the POPDEER PD-J01 Car Jump Starter. This powerful and versatile device is designed to jump start vehicles with dead batteries and serve as a portable power bank for your electronic devices. Please read this manual carefully before use to ensure safe and optimal performance.

Product Overview
Features
- Powerful Jump Starting: 2500A peak current, capable of starting 8.0L gas and 6.0L diesel engines.
- Multi-functional Power Bank: 20000mAh capacity with dual USB outputs (5V/2A each) to charge smartphones, tablets, and other devices.
- Smart LCD Display: Real-time display of operational status, battery level, and error codes.
- Advanced LED Flashlight: Features 3 modes: Flashlight (always on), Strobe (alternating flash), and SOS (three long, three short flashes) for emergencies.
- Robust Design: Dustproof and shockproof shell for durability in various conditions.
- Comprehensive Safety Protections: Incorporates 10 types of intelligent battery protection, including safeguards against sparks, reverse charges, low temperature, over currents, overload, high temperatures, reverse polarities, over voltages, short circuits, and over charges.
Components

- Button (Power/Mode)
- Display Screen (LCD)
- USB Output Interface 1
- USB Output Interface 2
- Charging Input Interface (Type-C)
- LED Flashlight
- DC Output (for jumper cables)
Specifications
| Feature | Specification |
|---|---|
| Brand | POPDEER |
| Model | PD-J01 |
| Peak Current | 2500A |
| Battery Capacity | 20000mAh |
| Input | Type-C (5V/2A) |
| Output (Jump Start) | 12V |
| Output (USB 1) | 5V/2.4A |
| Output (USB 2) | 5V/2.4A |
| Output (USB 1 + USB 2) | 5V/3.1A (Max) |
| Dimensions | 7.5 x 3.5 x 1.5 inches (approx.) |
| Discharge Temperature | -20℃ to +60℃ (-4°F to 140°F) |
| Charging Temperature | 0℃ to +40℃ |
| Engine Compatibility | Up to 8.0L Gas / 6.0L Diesel |


Setup
Initial Charging
Before first use, fully charge the POPDEER PD-J01 unit. Connect the provided USB-C cable to the charging input interface (5) on the unit and to a suitable USB power adapter (not included). The LCD display (2) will show the charging progress. Ensure the unit is fully charged for optimal performance, especially before jump-starting a vehicle.
Checking Battery Level
Press the main button (1) briefly to check the current battery level on the LCD display (2). It is recommended to have at least 50% charge before attempting to jump start a vehicle.
Operating Instructions
Jump Starting a Vehicle
Follow these steps to safely jump start your vehicle:

- Insert Starter Cable: Firmly insert the blue end of the smart jumper cable into the DC Output (7) port of the jump starter unit. Ensure a secure connection.
- Connect Clamps: Connect the red clamp to the positive (+) terminal of your vehicle's battery and the black clamp to the negative (-) terminal. Ensure the clamps make good contact with the battery terminals. The smart cable will indicate readiness.
- Start Engine: Return to your vehicle and start the engine. If the vehicle does not start immediately, wait 30 seconds and try again. Do not crank the engine for more than 3 seconds per attempt.
- Remove Jump Starter: Once the vehicle starts, immediately disconnect the jumper cables from the vehicle battery terminals (black first, then red), and then disconnect the smart cable from the jump starter unit.
Important Safety Note: The PD-J01 features multiple safety protections, including spark-proof technology and reverse polarity protection. Always ensure correct connections, but the device is designed to prevent damage from common errors.
Using as a Power Bank
The PD-J01 can charge various electronic devices:

- Connect your device's USB charging cable to either USB Output Interface 1 (3) or USB Output Interface 2 (4) on the jump starter.
- The unit will automatically begin charging your device. The LCD display will show "OUT" indicating power is being discharged.
Using the LED Flashlight
The built-in LED Flashlight (6) has three modes:

- Flash Light (Always On): Press and hold the main button (1) for 3 seconds to turn on the flashlight.
- Strobe: Briefly press the main button (1) again to switch to Strobe mode (flashing alternately).
- SOS: Briefly press the main button (1) a third time to activate SOS mode (three long, three short flashes).
- Turn Off: Press the main button (1) a fourth time or press and hold for 3 seconds to turn off the flashlight.
Maintenance
- Recharge Regularly: To prolong battery life, recharge the jump starter every 3-6 months, even if not used.
- Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. The recommended storage temperature is between 0℃ and +40℃.
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Cable Care: Inspect jumper cables for any damage before each use. Replace if frayed or damaged.

Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | Battery is completely drained. | Charge the unit fully using the Type-C input. |
| Car does not start after jump attempt. | Low charge on jump starter; poor connection; vehicle battery severely damaged; other vehicle issues. | Ensure jump starter is fully charged. Check cable connections for tightness and cleanliness. Wait 30 seconds and try again. If still no start, consult a mechanic. |
| LCD displays an error code. | Indicates a specific protection mechanism has been triggered (e.g., reverse polarity, short circuit). | Refer to the safety protection diagram. Disconnect all cables, wait a few minutes, and re-attempt connection carefully, ensuring correct polarity. |
| Devices not charging via USB. | Jump starter battery low; faulty USB cable/device. | Check jump starter battery level. Try a different USB cable or device. |

User Tips
- Always keep the jump starter charged, especially before long trips or during cold weather, as battery performance can be affected by temperature.
- For optimal performance, ensure the battery terminals of the vehicle are clean and free of corrosion before connecting the clamps.
- After jump-starting, allow your vehicle's engine to run for at least 15-20 minutes to recharge its battery.
- The jump starter can be used for various 12V applications beyond cars, such as motorcycles, boats, and lawnmowers, provided they fall within the specified engine displacement limits.

Warranty & Support
For warranty information, technical support, or any questions regarding your POPDEER PD-J01 Car Jump Starter, please contact the seller or manufacturer directly. Retain your proof of purchase for warranty claims.