HelloRadio V16 PRO MAX

Contents

HelloRadio V16 PRO MAX ELRS 4in1 2.4GHz Radio Transmitter User Manual

For FPV Racing Drones, Airplanes, and RC Model Aircraft

1. Introduction and Overview

The HelloRadio V16 series offers advanced 2.4GHz radio transmitters designed for precision control of FPV racing drones, airplanes, and various RC model aircraft. This manual provides essential information for the setup, operation, and maintenance of your V16, V16 PRO, or V16 MAX transmitter.

Key features include a comfortable touch panel, optimized LCD circuit design, support for ESP32-C3-MINI and XIAO ESP32-C3 Bluetooth modules, and a hardware dual serial port for external RF modules. The V16 series also incorporates advanced safety features such as overvoltage and reverse-polarity protection for battery cells.

Depending on your model, features may include a 6-axis gyroscope for motion control and head chasing, programmable colorful gimbal LEDs, and an intelligent voice interaction control circuit.

HelloRadio V16 PRO MAX ELRS 4in1 Radio Transmitter with accessories in box.
Figure 1: HelloRadio V16 PRO MAX ELRS 4in1 Radio Transmitter and included accessories.
Front view of the HelloRadio V16 transmitter showing gimbals, switches, and screen.
Figure 2: Front view of the HelloRadio V16 transmitter.

2. Setup

2.1 Initial Inspection and Battery Installation

Upon unboxing, inspect the transmitter for any visible damage. The HelloRadio V16 series does not include batteries. You will need to install compatible batteries (6.6-8.4V DC) into the battery compartment. Ensure correct polarity to prevent damage. The battery cover features an anti-slip design for secure closure.

Rear view of the HelloRadio V16 transmitter with labels pointing to LS/RS slider, external module bay, ergonomic gripper, and anti-slip battery cover.
Figure 3: Rear view highlighting external module position and battery cover.

2.2 Firmware and External Modules

The transmitter runs on open-source EdgeTX firmware. It supports USB online or SD card offline upgrades. The hardware dual serial port allows communication with various external RF modules. Ensure your external module is correctly installed in the designated bay.

EdgeTX system logo indicating support for the HelloRadio V16 transmitter.
Figure 4: EdgeTX System Support.
Close-up of the HelloRadio V16 transmitter highlighting the external high-frequency module bay and LS/RS slider upgrade.
Figure 5: External High-Frequency Module Bay and LS/RS Slider.

2.3 Gimbal LED and 6-Mode Switch Configuration (V16 PRO/MAX)

For V16 PRO and V16 MAX models, the colorful gimbal LEDs are programmable. You can customize their colors through simple programming. The 6-mode switch can also be defined and programmed to customize functions and corresponding LED colors.

HelloRadio V16 transmitter with customizable colorful gimbal LEDs, demonstrating various color options.
Figure 6: Customizable Colorful Gimbal LEDs.

3. Operating Instructions

3.1 Basic Controls and Display

The V16 series features a 4.3-inch IPS full-color touch screen for convenient and efficient operation. Navigate menus and settings using the touch interface. The 3D Hall joysticks provide precise control.

HelloRadio V16 transmitter displaying its 4.3-inch IPS touch screen with a hand interacting with the interface.
Figure 7: 4.3-inch IPS Touch Screen Interface.
Close-up of the V4.0 Hall Stabilizing Joystick on the HelloRadio V16 transmitter, showing its range of motion.
Figure 8: V4.0 Hall Stabilizing Joystick.

The S1/S2 custom rotary switches offer precise and smooth adjustments for various functions.

Close-up of the S1/S2 custom rotary switches on the HelloRadio V16 transmitter.
Figure 9: S1/S2 Custom Rotary Switches.

3.2 Motion Control and Head Tracking (V16 PRO/MAX)

Equipped with a 6-axis gyroscope, the V16 PRO and V16 MAX models support motion control and head tracking functions. These features allow for intuitive control of your aircraft's attitude and perspective.

Diagram explaining the 3-axis gyroscope and accelerometer for motion control in the HelloRadio V16 transmitter.
Figure 10: Motion Control Gyroscope Diagram.
User operating HelloRadio V16 transmitter with head-tracking function, controlling aircraft perspective.
Figure 11: Head-Tracking Function in use.

3.3 Voice Function and Somatosensory Control (V16 PRO/MAX)

The V16 PRO and V16 MAX models feature intelligent voice interaction. To activate the voice function, press the TELE button. The speech switch typically occupies channels 5 and 6 by default for landing gear and flaps, and can be customized.

For somatosensory control, press the TELE button and turn on the speech switch. Say "motion control" to activate. Moving any joystick will immediately stop the motion control mode. The action dead zone and the three axial sensitivities of the somatosensory control and lever release dead zone are adjustable via the settings menu.

Screenshots of the HelloRadio V16 display showing settings for voice function, somatosensory control, and gyroscope pitch adjustment for radio safeguard features.
Figure 12: Radio Safeguard Settings for Voice and Somatosensory Control.
HelloRadio V16 transmitter with AI Voice Assistant feature, depicted with a drone.
Figure 13: AI Voice Assistant Feature.

4. Maintenance

4.1 Battery Care

The transmitter is equipped with a charging circuit that automatically stops charging if overvoltage is detected in the battery cells, protecting the battery. A protection circuit also prevents damage from reverse-polarity connections of the power supply. Always use recommended battery types and charging practices.

The device includes 3 voltage and current measurement units with an accuracy of +-0.1%, which independently measure single battery cell voltage, monitor charging voltage and current, and display overall system and RF module working voltage/current in real-time. An alarm will sound, or the system will shut down, if abnormal voltage or current is detected.

4.2 Firmware Upgrades

Keep your transmitter's firmware updated to ensure optimal performance and access to new features. Upgrades can be performed via USB connection to a computer or offline using an SD card.

4.3 Cleaning

Wipe the transmitter's exterior with a soft, dry cloth. Avoid using harsh chemicals or solvents that could damage the finish or electronic components.

5. Troubleshooting

  • System Shutdown/Alarm: If the system shuts down or an alarm sounds, check the battery voltage and current readings on the display. This indicates abnormal voltage or current, and the protection circuits are active.
  • Motion Control Stops Unexpectedly: If motion control is active and stops, verify that no joysticks were moved, as any joystick input will disengage motion control mode.
  • No Power: Ensure batteries are correctly installed and charged. Check for any visible damage to the power port or battery contacts.
  • Display Issues: If the screen is unresponsive or shows errors, try restarting the transmitter. If issues persist, consider a firmware re-flash.

6. Specifications

Feature Specification
Size 286 x 128 x 182 mm
Weight 750 grams (excluding battery)
Transmission Frequency 2.400GHz - 2.480GHz
Built-in Transmitter Module ELRS or 4in1 (selectable)
Working Current 450mA
Working Voltage 6.6-8.4V DC
Open Source Firmware EdgeTX
Display 4.3-inch IPS full-color touch screen, 480 x 272 resolution
Joystick 3D Hall joystick
Upgrade Method USB online / SD card offline
Material Composite Material
Recommended Age 14+ years

6.1 Model Comparison

Comparison table showing features across V16, V16 PRO, V16 MAX, and V16 MAX R9 models, including programmable light coil, voice assistant, radio safeguard, 6-axis gyro, metal rollers/panels, and metal rocker.
Figure 14: Feature Comparison Across V16 Models.

7. User Tips

  • Language Settings: If you require the interface in a specific language (e.g., Italian), check the EdgeTX firmware settings for available language packs or community-contributed localizations. Firmware updates may also introduce new language options.
  • Customization: Explore the EdgeTX firmware to fully utilize the programmable switches, gimbal LEDs, and voice control functions to tailor the transmitter to your specific flying style and preferences.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.