HITBOX HBM200

Contents

HITBOX HBM200 3-in-1 Welding Machine User Manual

Model: HBM200

Introduction

Thank you for purchasing the HITBOX HBM200 Inverter Welder. This manual provides detailed instructions for the proper operation, installation, maintenance, and troubleshooting of your machine. Please read it carefully before use and keep it for future reference.

The HITBOX HBM200 is a versatile 3-in-1 multi-function welding machine designed for both hobbyists and professionals. It supports Gasless MIG, MMA (Manual Metal Arc), and Lift TIG welding processes. The product conforms to national and international standards, including GB/T15579-1, IEC60974, EN60974, AS60974, and UL60974, and meets the equipment requirements of A in EMC.

For a comprehensive guide, you can also refer to the official PDF manual: HITBOX HBM200 User Manual (PDF)

1. Safety Precautions

Welding operations can be dangerous and may cause harm to you and others. Always take appropriate protective measures. Refer to the manufacturer's safety guidelines for accident prevention.

Professional Training

  • Use labor protection welding supplies authorized by national security supervision departments.
  • Operators must be qualified personnel with a valid “metal welding (OFC) operations” certificate.
  • Always cut off power before maintenance or repair.

Electric Shock

Electric shock can lead to serious injury or death.

  • Install an earth device according to application criteria.
  • Never touch live parts when skin is bare or wearing wet gloves/clothes.
  • Ensure you are insulated from the ground and workpiece.
  • Ensure your working position is safe.

Smoke & Gas

Smoke and gas can be harmful to health.

  • Keep your head away from welding smoke and gas to avoid inhalation.
  • Ensure the working environment has good ventilation with exhaust or ventilation equipment.

Arc Radiation

Arc radiation can damage eyes or burn skin.

  • Wear suitable welding masks and protective clothing to protect your eyes and body.
  • Use appropriate masks or screens to protect bystanders.

Improper Operation

Improper operation may cause fire or explosion.

  • Welding sparks can cause fires; ensure no combustible materials are nearby and be aware of fire hazards.
  • Have a fire extinguisher nearby and know how to use it.
  • Airtight container welding is forbidden.
  • Do not use the machine for purposes other than welding (e.g., pipe thawing, battery charging, heating).

Additional Safety Notes

  • Hot Workpiece: Do not touch hot workpieces with bare hands. Cooling is needed during continuous use of the welding torch.
  • Magnetic Fields: Pacemaker users should stay away from the welding spot. Consult a medical professional.
  • Moving Parts: Keep clear of moving parts like the fan. All doors, panels, covers, and protective devices must be closed during operation.
  • Machine Failure: Seek professional help if you encounter machine failure. Consult this manual or contact the service center.
  • Welding Torch Use: Parts of the machine, such as the filler wire end and welding torch, become hot. The wire is sharp and moves quickly; exercise caution when threading.
  • Never carry the machine on your shoulder during welding; place it on an even surface. The shoulder strap is for carrying only.
  • Do not place the machine near hot objects, as plastic covers may melt.
  • Do not move the shielding gas bottle when the control valve is in place. Secure the gas bottle upright.
  • Always close the gas bottle after use.

2. General Description

The HITBOX HBM200 is an easy-to-use MIG welding machine suitable for both hobby and professional applications. Its key features include:

  • Multi-functional: Supports Gasless MIG, MMA, and Lift TIG welding.
  • IGBT Power Device: Utilizes an IGBT power device with a unique control mode for enhanced reliability.
  • High Duty Cycle: Ensures long-duration operation.
  • Stable Output: Features closed-loop feedback control and constant voltage output, maintaining performance even with mains voltage fluctuations within ±10%.
  • Adjustable Parameters: Offers adjustable welding voltage and current for excellent welding performance.
  • Synergic Control: Unique welding dynamic characteristic control circuit in Gasless mode provides a stable arc, minimal spatter, and beautiful weld beads, leading to high efficiency.
  • Improved Arc Ignition: Designed to remove tip ball after welding and features soft-start wire feeding for a high successful rate of arc ignition.
  • MMA Performance: Delivers stable welding current in MMA mode with excellent arc ignition.

Video: Demonstrating the 3-in-1 welding capabilities (MIG, MMA, Lift TIG) and the quality of welding results achievable with the HBM200.

3. Main Parameters (Specifications)

The following table details the technical specifications for the HITBOX HBM200 welding machine:

ParameterHBM200 (110V)HBM200 (220V)
Rated Input Voltage (V)AC110V±10%, 50/60HzAC220V±10%, 50/60Hz
Rated Input Power (KVA)MMA:9KVA/MIG:13.4KVAMMA:9KVA/MIG:13.4KVA
Rated Input Current (A)MMA:82A/MIG:70.3AMMA:41A/MIG:35.1A
Rated Output Current & VoltageMMA:200A/28V/MIG:200A/24VMMA:200A/28V/MIG:200A/24V
Output Current (A)MMA:20-200A/MIG:30-200AMMA:20-200A/MIG:30-200A
No-load Voltage (V)MMA:54V/MIG:55VMMA:54V/MIG:55V
Rated Duty Cycle (%)6060
Efficiency (%)8585
Power Factor (cosφ)0.730.73
Protection ClassIP21SIP21S
Insulation ClassFF
Welding Parameter Table for HBM200

Image: Welding Parameter Table for Flux Core MIG, MMA, and Lift TIG, showing material thickness, wire type, and recommended current ranges.

4. Installation and Setup

Please install the machine strictly according to the following steps. The protection class of this machine is IP21S, so avoid using it in rain. Before using, ensure the input voltage is within the specified range (200V-240V) to prevent damage.

4.1 Connection of Input Cable

  1. A primary power supply cable is provided. Connect it to the rated input power. A ground connection is essential for safety.
  2. Ensure the primary cable is tightly connected to the correct socket to prevent oxidation.
  3. Verify the voltage with a multi-meter to ensure it is within the acceptable range.

4.2 MMA Installation

  1. Insert the two quick plugs into the quick sockets on the front panel and tighten them for good contact. Loose connections can cause burning if the working time or current is high.
  2. Insert the cable plug with the electrode holder into the “+” output terminal on the front panel and tighten clockwise.
  3. Insert the cable plug with the work clamp into the “-” output terminal on the front panel and tighten clockwise.
  4. DCEP/DCEN Connection: Generally, DCEP (Electrode Positive) and DCEN (Electrode Negative) connections are available.
    • DCEP: Connect the electrode holder to “+” output terminal, and the work clamp to “-” output terminal.
    • DCEN: Connect the electrode holder to “-” output terminal, and the work clamp to “+” output terminal.

    Choose DCEP/DCEN based on workpiece and electrode requirements. Incorrect polarity can lead to unstable arc, excessive spatter, and electrode sticking. Exchange the quick plugs to correct the connection.

  5. If secondary cables (welding cable and earth cable) are long, select a cable with a larger cross-section to reduce voltage drop.

4.3 MIG Installation

  1. Insert the cable plug with the earth clamp into the “-” (f) terminal on the front panel and tighten clockwise.
  2. Insert the quick plug of the wire feeder into the “+” (g) (“GAS”) terminal on the mid-clapboard of the welding machine and tighten clockwise.
  3. Install the wire spool on the spindle adapter. Ensure the groove size on the drive roll matches the contact tip size of the welding torch and the wire size. Release the pressure arm of the wire feeder, thread the wire through the guide tube, and into the drive roll groove. Adjust the pressure arm to prevent wire sliding. Excessive pressure can distort the wire. Press the manual wire feeding button to feed the wire out of the torch contact tip.
  4. Connect the gas cylinder (if using shielding gas) equipped with a gas regulator to the gas inlet on the back panel of the machine with a gas hose.
HBM200 MIG Welding Setup

Image: Close-up of the HBM200 display and controls, illustrating the two-step process for MIG welding: 1. Select mode and wire diameter, 2. Adjust current intensity.

HBM200 3-in-1 Welding Modes

Image: Close-up of the HBM200 display showing indicators for Flux MIG, MMA, and Lift TIG modes, along with current settings.

HBM200 Wire Feeding Mechanism

Image: Internal view of the HBM200 showing the wire feeding mechanism and how to apply 2 lbs of .030" (0.8mm) and .039" (1mm) flux core wire.

Upgraded HITBOX MIG Torch Diagram

Image: Diagram of the upgraded HITBOX MIG torch, showing the nozzle, electrode, and torch head. Tip: Remove electrode and nozzle before feeding wire for smoother operation.

HITBOX HBM200 with Accessories

Image: The HITBOX HBM200 welding machine displayed with its included accessories, such as the MIG gun, electrode holder, earth clamp, flux core wire, nozzles, welding rods, and hammer.

5. Operation Control and Description

The HBM200 features an intuitive control panel for easy operation.

5.1 Control Panel Components

  1. LCD screen: Displays welding parameters.
  2. Overheated LED indicator: Lights up if the machine overheats.
  3. LED power indicator: Indicates power status.
  4. MMA indicator: Lights up when in MMA mode.
  5. Flux-cored wire indicator Ø0.8: Indicates selection of 0.8mm flux-cored wire.
  6. Flux wire indicator Ø1.0: Indicates selection of 1.0mm flux-cored wire.
  7. Function keys: For selecting welding modes.
  8. Welding current knob: Adjusts current intensity.
  9. Negative terminal: Connection point for work clamp.
  10. Aviation socket: For specific connections.
  11. Positive terminal: Connection point for electrode holder or MIG gun.
  12. Power cord: For connecting to power supply.
  13. Power switch: Turns the machine on/off.
  14. Cooling fan: Provides cooling during operation.
  15. Grounding screw: For earth connection.
HBM200 Front and Rear Panel Diagram

Image: Diagram illustrating the front and rear panels of the HBM200, with numbered components for identification.

5.2 Operation Method

  1. After installation and with the power switch on, the machine will start with the power LED on and the fan running.
  2. For MMA Welding: Turn the MMA/MIG shift switch to MMA mode. Adjust the welding current with the current control knob according to the electrode diameter and workpiece thickness. Recommended current ranges:
    • Φ2.5 electrode: 70-100A
    • Φ3.2 electrode: 110-160A
    • Φ4.0 electrode: 170-200A
    • Φ5.0 electrode: 230-280A
  3. For MIG Welding (Gasless): Switch the MMA/Gasless shift switch to Gasless mode. Select the proper welding voltage and current by adjusting the voltage control knob and wire feed speed control knob on the front panel.
  4. Welding can be initiated by pushing the torch trigger on the welding torch.
  5. If using shielding gas, open the cylinder valve and adjust the flow regulator to the proper gas flow.
  6. The gas supply will cut off 1 second after the arc stops.
HBM200 for Beginners

Image: The HBM200 welding machine in use, emphasizing its suitability for beginners due to synergic control and ease of use.

HBM200 Welding Modes

Image: Visual representation of the three welding modes: Flux MIG, Stick (MMA), and Lift TIG (WP17V torch not included).

6. Maintenance

Warning: This machine produces electric and magnetic fields. Ensure proper protection and screening. An earth leakage-circuit breaker should be used. Do not pull out or insert plugs/cables during operation. Always turn off power before connecting cables, maintenance, or opening the cover.

  1. Regularly remove dust with dry and clean compressed air. If operated in a polluted environment, clean more frequently.
  2. Compressed air pressure must not exceed 5 bars to prevent damage to internal components.
  3. Regularly check internal connections, especially output terminals, for tightness and damage. Tighten or replace as needed.
  4. Prevent water and steam from entering the machine. If it gets wet, dry the inside and check insulation status.
  5. For long-term storage, keep the machine in a cool, dry place, covered or in its box.
  6. When power is on, avoid touching electrified devices like the fan to prevent injury.
HBM200 Safety and Durability Features

Image: Diagram highlighting the safety and durability features of the HBM200, including Overvoltage, Overcurrent, Overheating, Overload Protection, and IP21 Protection Rating.

HBM200 Waterproof Power Switch

Image: Comparison showing the HBM200's waterproof power switch, which prevents water and dust, extends lifespan, and is suitable for outdoor welding.

7. Troubleshooting

Warning: Experimentation and careless maintenance can worsen problems. Exposed connections may carry life-threatening voltages. Any direct or indirect contact can cause electric shock, potentially fatal. Seek professional help if unsure.

The following table lists common malfunctions and their solutions:

MalfunctionCause and Solution
The overheating LED is on.
  1. Check welding current and time against duty cycle requirements.
  2. Check fan operation. If the fan doesn't work, check its power supply (220V) and connecting cable.
  3. Replace the thermal switch if damaged.
The power LED is off, and there is no output current.
  1. Check if the fan works. If not, the power cord may be poorly connected.
  2. If the fan works, the control PCB inside the machine may have failed.
No response when pushing the torch trigger, and the protection LED is off.
  1. Check if the gun trigger is in good contact.
  2. Check if the welding torch is well connected to the European connector and its control jack.
  3. The control PCB inside the machine may have failed.
When torch trigger is pressed, wire feeder works and gas comes out, but there is no output current, and the protection LED is off.
  1. Check the wire feeder for clogging or damage.
  2. Check the contact tip of the welding torch for clogging or damage.
  3. The control PCB inside the machine may have failed.
There is output current when pushing the torch trigger to feed gas, but the wire feeder does not feed wire.
  1. Check if all cables are connected properly.
  2. Output connectors are disconnected or damaged.
  3. The control circuit might be faulty.
Welding can be carried out when pushing the torch trigger, but the voltage cannot be adjusted.
  1. Check if the voltage feedback wire inside the machine is in good condition.
  2. The control PCB inside the machine may have failed.
Welding current is unstable.
  1. Check the pressure arm on the wire feeder for proper pressure.
  2. Check if the drive roll matches the wire size being used.
  3. Check the contact tip of the welding torch for wear. Replace it and tighten if necessary.
  4. Check the welding wire for good quality.
  5. Check if the torch cable is too twisted.
  6. Check if the quick plug is loose.
Weld bead is not well protected.
  1. Do not move the welding torch away immediately when stopping welding, so that the shielded gas can protect the weld bead.
  2. Prolong the post-flow time of the shield gas, and contact our company.

8. User Tips

  • For Beginners: The HBM200 is designed with synergic control, making it simple to use even for beginners. Practice on scrap metal to get a feel for the settings before tackling important projects.
  • Wire Feeding: To ensure smoother wire feeding, it is recommended to remove the electrode and nozzle from the MIG torch before feeding the wire. Once the wire reaches the torch head, then reinstall them.
  • Portability: The compact and lightweight design (7.63 lbs) makes it easy to carry for various projects, from DIY to small repairs.
  • Material Versatility: This welder is suitable for a wide range of materials including mild steel, cast iron, square pipe, stainless steel, sheet metal, and metal cages.
HBM200 Portable and Compact

Image: The HBM200 welding machine shown in a car trunk, illustrating its portable and compact design (7.63 lbs).

HBM200 Applicable Materials

Image: Various metal types that can be welded with the HBM200, including Mild Steel, Cast Iron, Square Pipe, Stainless Steel, Sheet Metal, and Metal Cage.

9. Warranty and Support

The HITBOX HBM200 welding machine comes with a 1-year warranty. If you encounter any problems or have questions regarding the use of this welder, please contact HITBOX customer service for assistance. Our online customer service is available to help you.

For more information and support, please visit the official website: www.hitboxweld.com

© 2023 HITBOX. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.