1. Introduction
Thank you for choosing the Vinsetto Reclining Massage Chair. This chair is designed to provide comfort and relaxation, especially for individuals who spend long hours at a desk. Equipped with six vibration massage points, five massage modes, and a lumbar heating function, it offers a customizable experience. Its adjustable height and reclining feature with a footrest ensure ergonomic support and versatility for various activities.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Ensure all components are securely fastened before use.
- Do not exceed the maximum load capacity of 120 kg (265 lbs).
- Keep children and pets away from the chair during assembly.
- Use only the provided power adapter for the massage and heating functions.
- Do not use the chair if any part is damaged or broken. Contact customer support for replacement parts.
- Avoid prolonged exposure to direct sunlight or extreme temperatures.
- Unplug the chair from the power source when not in use or before cleaning.
3. Package Contents
Please check the package to ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer service.
- Backrest
- Seat
- Armrests (Left and Right)
- Base with Casters
- Gas Lift Cylinder
- Footrest
- Lumbar Pillow
- Remote Control
- Power Adapter
- Assembly Hardware (screws, washers, Allen key)
4. Assembly & Setup
While specific assembly instructions are typically provided with the product, here are general steps for assembling your Vinsetto Reclining Massage Chair:
- Attach Casters to Base: Insert the casters into the holes on the star base until they click into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the star base.
- Assemble Seat and Backrest: Attach the backrest to the seat using the provided hardware. Ensure all screws are tightened securely.
- Attach Armrests: Secure the armrests to the seat and backrest assembly with the appropriate screws.
- Mount Assembly onto Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder.
- Attach Footrest: Slide the footrest into its designated slots under the seat.
- Connect Power: Locate the power cable from the chair and connect it to the remote control, then plug the power adapter into the remote control and a suitable electrical outlet (Input: 100-240V, 50/60Hz; Output: 12V/1A, 12W).
5. Operating Instructions
5.1. Massage and Heating Functions
The chair features six vibration massage points and a lumbar heating function, controlled by a wired remote. The remote allows you to select from five different massage modes.
- Power Button: Turn the massage and heating functions ON/OFF.
- Mode Selection (M1-M5): Choose from five distinct massage modes to suit your preference.
- Intensity Adjustment: Adjust the intensity of the vibration massage.
- Heating Function: Activate or deactivate the lumbar heating for added comfort.
5.2. Reclining Function
The chair can recline up to 155 degrees, allowing you to switch between working, watching, and relaxing positions. It also includes a retractable footrest for full body support.
- To recline, pull the lever located on the side of the chair and lean back to your desired angle. Release the lever to lock the position.
- To extend the footrest, pull it out from under the seat. Push it back in when not needed.
5.3. Height Adjustment
Adjust the seat height to find your optimal ergonomic position at your desk.
- To raise the seat, lift the lever while taking your weight off the seat.
- To lower the seat, lift the lever while remaining seated.
5.4. Tilt Function
The chair also features a tilt function to relieve back stress. This allows the entire seat and backrest to rock gently.
- Typically, a separate lever or knob under the seat controls the tilt lock and tension. Refer to the specific assembly guide for your model.
6. Maintenance
- Cleaning: For fabric surfaces, use a soft cloth dampened with mild soap and water. Avoid harsh chemicals. For the base and plastic parts, wipe with a damp cloth.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
- Storage: Store the remote control in the back pocket when not in use.
- Power Cord: Inspect the power cord and adapter regularly for any damage. If damaged, discontinue use and replace.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Massage/Heating not working | Not plugged in; loose connection; power adapter issue | Ensure power adapter is securely plugged into the chair and wall outlet. Check for damage to the power cord or adapter. |
| Chair does not recline | Recline lever not engaged; mechanism jammed | Ensure the recline lever is fully pulled. Check for any obstructions. |
| Seat height not adjusting | Gas lift cylinder issue; height adjustment lever not engaged | Ensure the height adjustment lever is fully lifted/depressed. If the issue persists, the gas lift cylinder may need replacement. |
| Chair is wobbly | Loose screws; uneven floor | Check and tighten all assembly screws. Ensure the chair is on a flat, even surface. |
8. Specifications
| Feature | Detail |
|---|---|
| Color | Gray |
| Material | Linen (polyester), Foam, Multi-layer board, Steel |
| Total Measurements (LxWxH) | 66 x 76 x 112-120 cm |
| Recliner Dimensions (LxWxH) | 66 x 122 x 83 cm |
| Seat Measurements (LxW) | 54 x 51 cm |
| Seat Height | 47-55 cm |
| Armrest Height (to seat) | 22 cm |
| Backrest Measurements (WxH) | 52 x 69 cm |
| Seat and Backrest Thickness | 12 cm |
| Power Cable Length | 1.2 m |
| Maximum Load | 120 kg (265 lbs) |
| Power Input | 100-240V, 50/60Hz |
| Power Output | 12V/1A, 12W |
| Reference Model | 921-658v90gy |
9. User Tips
- For optimal comfort, adjust the seat height so your feet are flat on the floor and your knees are at a 90-degree angle.
- Experiment with the different massage modes and intensities to find what works best for you.
- Utilize the reclining function and footrest for short breaks to alleviate pressure during long work sessions.
- Keep the remote control in the integrated back pocket to prevent misplacement.
10. Warranty & Support
For any questions, concerns, or support needs regarding your Vinsetto Reclining Massage Chair, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.
