User Manual

Introduction

Thank you for purchasing the MOC-238933 Gingerbread Sci-fi Spaceship Warship Building Block Set. This manual provides important information regarding the safe assembly, use, and maintenance of your new building block model. Please read this manual thoroughly before beginning assembly and retain it for future reference.

Safety & Warnings

⚠️ WARNING: CHOKING HAZARD

• Small parts. Not for children under 3 years.
• Contains small parts which may pose a choking hazard if swallowed. Keep away from babies and toddlers.
• Adult supervision is recommended during assembly.

⚠️ SAFETY INFORMATION

• Do not throw the blocks at people or animals.
• Do not expose the product to open flames or high heat sources.
• Clean with a damp cloth only; do not submerge in hot water or use harsh chemicals.
• Inspect the product before each use. Discard any broken pieces immediately to prevent injury.

Package Contents

Your MOC-238933 building block set typically includes:

• Assorted ABS plastic building blocks (776 pieces)
• Electronic instruction manual (PDF format)
• (Optional) Brick separator tool

Note: This product is typically packaged in OPP bags without an original packing box.

Specifications

Figure 1: Assembled MOC-238933 Gingerbread Sci-fi Spaceship Warship model, showing the main walker-like structure, two smaller craft, and a snowy base. The image also indicates 'MOC-238933' and '776PCS'.

Figure 2: Alternative view of the MOC-238933 model, showcasing the snowy base with two smaller gingerbread-themed spacecraft and a laser beam effect, without the main walker structure.

Setup & Assembly

Refer to the detailed step-by-step instruction booklet (PDF) provided with your set for complete assembly guidance. The general process is as follows:

1. Preparation: Open the package and sort the bricks by color or size according to the parts list in the instruction manual.
2. Assembly: Follow the step-by-step instruction booklet included in the box. Ensure all bricks are pressed firmly together to ensure structural stability.

The official user manual PDF can be accessed via the provided link: View User Manual (PDF)

Maintenance

• Cleaning: Clean the building blocks with a damp cloth only. Do not submerge in hot water or use harsh chemicals, as this may damage the plastic or printed elements.
• Storage: Store the assembled model or loose bricks in a cool, dry place away from direct sunlight to prevent discoloration and material degradation.
• Inspection: Periodically inspect the model for any loose or damaged parts. Replace or secure as necessary.

Troubleshooting

• Missing Parts: If you find any parts are missing during assembly, please contact the seller immediately. Substitutes can often be provided.
• Difficulty Separating Bricks: If included, use the brick separator tool to separate tightly connected bricks. Do not use teeth or other tools that could cause damage or injury.
• Structural Instability: Ensure all bricks are firmly pressed together as per the instructions. Re-check connections if parts feel loose.

User Tips

• Color Substitutions: In some cases, if individual accessories cannot be found in the exact color, other colors may be used as substitutes by the manufacturer.
• Custom Models: If you are looking for a specific MOC model not found in the store, you can often share the MOC number with the seller to source and assemble the necessary materials.
• Electronic Manuals: Keep a digital copy of your electronic manual accessible on a tablet or computer for easy zooming and navigation during assembly.

Compliance Information

This product complies with the essential safety requirements of the European Union Toy Safety Directive 2009/48/EC and relevant harmonized standards.

• Applicable Standards: EN 71-1 (Mechanical and physical properties), EN 71-2 (Flammability), EN 71-3 (Migration of certain elements).
• Conformity Marking: CE
• Declaration: We hereby declare that this product conforms to the essential requirements and other relevant provisions of the Toy Safety Directive 2009/48/EC.

Manufacturer & EU Representative Information

Manufacturer:

Shantou Chuangji Technology Co, Ltd.
Room 102, First Floor, Building A, General Factory Building, Chenghai Science and Technology Innovation Center, Longtian Guanghua Industrial Zone Shantou Guangdong Province
Telephone: 86-13826416935
Email: 2788029005@qq.com

EU Authorized Representative:

EC REP SERVICES SL
Calle Gran Via 49, 7 Dch. Madrid 28013 Spain
Telephone: 34-682797075
Email: ecrepservice@hotmail.com

Warranty & Support

This product does not come with an explicit warranty statement in the provided documentation. For any issues, missing parts, or support inquiries, please contact the seller directly through your purchase platform. They are committed to providing assistance and resolving any problems you may encounter.

If there is any problem after receiving the product, please contact the seller immediately for a response within 24 hours.