1. Introduction
This manual provides essential information for the safe and efficient operation of your Sumry HMS 1.5k-12v AC Inverter. This device is a configurable hybrid solar inverter designed to manage AC and solar input priority via LCD settings, suitable for various applications including air conditioning systems.
Please read this manual thoroughly before installation and operation. Keep it for future reference.
2. Product Overview
The HMS 1.5k-12v is a DC/AC inverter that integrates multiple functions to provide reliable power. It features a clear LCD display for monitoring and configuration.
Figure 2.1: Front-side view of the HMS 1.5k-12v AC Inverter
Figure 2.2: Front view of the HMS 1.5k-12v AC Inverter
Figure 2.3: Top-down view showing connection ports
Figure 2.4: Bottom-up view showing connection ports
Figure 2.5: Side view of the HMS 1.5k-12v AC Inverter
Video 2.1: Product showcase for the Sumry HMS 1.5k-12v AC Inverter.
3. Safety Information
Please observe the following safety precautions during installation, operation, and maintenance:
- Ensure all wiring is performed by qualified personnel.
- Do not attempt to open or repair the inverter yourself. Refer to authorized service personnel.
- Install the inverter in a well-ventilated area, away from flammable materials and moisture.
- Ensure proper grounding of the unit.
- Disconnect all power sources (AC, DC, and battery) before performing any maintenance or wiring.
- Keep children away from the inverter.
4. Installation and Setup
The HMS 1.5k-12v inverter is designed for integration into a hybrid solar system. Proper installation is crucial for performance and safety.
4.1. Mounting the Inverter
- Choose a suitable location that is dry, cool, and well-ventilated.
- Mount the inverter vertically on a sturdy wall or surface, ensuring adequate clearance for airflow around the unit.
- Use appropriate mounting hardware for the weight of the inverter.
4.2. Wiring Connections
All wiring should comply with local and national electrical codes. Refer to the connection ports shown in Figures 2.3 and 2.4.
- **Battery Connection**: Connect the battery bank to the designated battery terminals. Ensure correct polarity.
- **AC Input Connection**: Connect the utility grid or generator AC input to the AC input terminals.
- **Solar PV Input Connection**: Connect the solar panel array to the PV input terminals. Observe correct polarity and voltage limits.
- **AC Output Connection**: Connect your AC loads (e.g., air conditioner) to the AC output terminals.
- **Grounding**: Ensure the inverter chassis is properly grounded.
Figure 4.1: Conceptual diagram of a hybrid solar inverter system for home use.
5. Operation
The inverter features an LCD display and control buttons for monitoring and setting operational parameters.
5.1. LCD Display Overview
The LCD display provides real-time status and operational data. Refer to the diagram below for an explanation of each indicator:
Figure 5.1: LCD Display and Indicator Meanings
| No. | Indicator | Description |
|---|---|---|
| 1 | PV | PV input |
| 2 | AC | AC input |
| 3 | INPUTBATTEMP | Input voltage, input frequency, PV voltage, battery voltage, charger current |
| 4 | Setting programs | Setting programs |
| 5 | Flashing / Lighting | Flashing with warning code / Lighting with fault code |
| 6 | OUTPUTBATTLOAD | Output voltage, output frequency, load percent, load in VA, load in watt and discharging current |
| 7 | Load level | Load level (25%, 100%) |
| 8 | DC/AC Inverter | DC/AC inverter circuit is working |
| 9 | Battery level | Battery level |
| 10 | Charger circuit | Charger circuit is working |
| 11 | PV panel connection | Unit connects to the PV panel |
| 12 | Mains connection | Unit connects to the mains |
| 13 | Bypass | Load is supplied by utility power |
| 14 | Alarm disabled | Unit alarm is disabled |
| 15 | Overload | Overload |
5.2. Configuring AC/Solar Input Priority
The inverter allows you to configure the input source priority (AC or Solar) via the LCD setting programs (Indicator 4). Consult the detailed programming section in the full product manual for specific steps. Typically, you can set the inverter to prioritize:
- **Solar First**: Prioritizes solar power to supply loads and charge batteries. Utility power is used only when solar power is insufficient.
- **Utility First**: Prioritizes utility power. Solar power is used as a backup or to charge batteries.
- **SBU (Solar-Battery-Utility)**: Prioritizes solar, then battery, then utility.
Use the 'UP', 'DOWN', 'ESC', and 'ENTER' buttons on the control panel to navigate and select settings.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter.
- **Cleaning**: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris.
- **Connections**: Check all wiring connections regularly to ensure they are tight and free from corrosion.
- **Environment**: Ensure the installation environment remains within the specified temperature and humidity ranges.
- **Battery Inspection**: If using external batteries, regularly inspect them for signs of damage, leakage, or corrosion.
Always disconnect all power sources before performing any maintenance.
7. Troubleshooting
If the inverter is not functioning correctly, refer to the LCD display for warning or fault codes (Indicator 5). Common issues and basic solutions are listed below:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power output | Battery low, AC input disconnected, Overload | Check battery voltage, verify AC input, reduce load |
| Warning/Fault code on LCD | Specific error condition (e.g., over-temperature, short circuit) | Refer to the full manual for specific code meanings and solutions. Address the underlying issue. |
| Inverter not charging batteries | PV input insufficient, AC input unavailable, Charger circuit fault | Check solar panel connections and sunlight, verify AC input, contact support if charger fault persists. |
| Overload indicator (15) active | Connected load exceeds inverter capacity | Disconnect non-essential loads. Ensure total load is within inverter's rated capacity. |
For persistent issues or complex fault codes, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | HMS1.5K |
| Type | DC/AC Inverters |
| DIY Supplies | Electrical |
| Origin | Mainland China |
| Dimensions (W x D x H) | 272mm x 100mm x 305mm |
| Package Weight | 20.5 kg |
| Output Type | Single |
| High-concerned chemical | None |
| Electronic | No |
9. User Tips
Based on general user experiences with similar inverters, consider the following tips for optimal performance:
- **Ventilation is Key**: Always ensure the inverter has ample space for ventilation. Overheating can significantly reduce its lifespan and efficiency.
- **Monitor LCD Regularly**: Periodically check the LCD display for any warning or fault codes, and monitor input/output parameters to ensure stable operation.
- **Battery Health**: Maintain your battery bank according to the manufacturer's recommendations. Battery health directly impacts the inverter's performance and backup time.
- **Load Management**: Avoid consistently running the inverter at its maximum capacity. Operating at 70-80% of its rated power can extend its life.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website.
Always provide your product model (HMS1.5K) and serial number when contacting support.