HawkSpeed 2996 2996A

Contents

HBX 2996/2996A 1/10 Scale RC Car Instruction Manual

Model: 2996, 2996A | Brand: HawkSpeed

1. Product Overview

This 1/10 scale remote control car is designed for RC car enthusiasts, whether they're looking for thrilling racing or off-road fun. Its advanced technology and meticulous design provide a realistic and enjoyable RC driving experience.

2. Specifications

2.1 Core Parameters

Parameter NameDetails
Article Number2996, 2996A
Motor TypeBrushed / Brushless (depending on model variant)
Speed RegulatorElectronic speed controller/receiver (Integrated ESC/RX controller, splash-proof)
Dimensions (L x W x H)34 x 29.5 x 13.5 cm
Wheelbase248 mm
Wheel Diameter110 mm
Battery Type7.4V, 1500 mAh Li-ion Battery, 15C
Frequency2.4 GHz
Control RangeUp to 80 meters (advertised as 100m in product properties)
RC TypeFully Proportional Synchronous Control System (Gun Control)
Control Time8 minutes (full throttle)
Scale1/10
Charging Time3.5 - 4 hours (USB charging)
Differential StructurePlanetary differential (full metal gears), front/center/rear differentials
Servo3-wire, 6 kg
Shock AbsorbersSpring shock absorbers
Speed32 km/h (up to 45km/h for brushless, up to 70km/h for strong brushless motor)
Remote Control Batteries2 AA batteries (sold separately)
ChargerUSB charger (1.3A)
MaterialMetal, Plastic
State of AssemblyReady-to-Go
OriginMainland China
Recommended Age14+ years
CertificationCE (Certificate Number: RE-18052102)
Dimensions diagram of the RC car
Figure 2.1: Dimensions of the RC Car (Length: 38cm, Width: 30cm, Height: 16cm).

3. Product Features

3.1 Excellent Remote Control System

This system features a 2.4G fully proportional, synchronized remote control system with fully proportional throttle and steering. This allows for precise control over speed and steering angle, providing a realistic driving experience. The system responds accurately to movements for smooth cruising or sharp turns.

Diagram of the 2.4G remote control
Figure 3.1: 2.4G Remote Control Layout, showing steering wheel, throttle, and control buttons (ST.TRIM, ST.D/R, SPEED, REV, EPA, Power switch).

3.2 Powerful Suspension System

The four-wheel drive independent shock-absorbing suspension system, combined with spring shock absorbers, effectively handles a variety of challenging terrain. It easily navigates obstacles, reduces the impact of bumps, and ensures a stable and smooth ride. Adjustable aluminum rings allow customization of suspension settings for different road conditions.

Independent suspension shock absorbers with metal adjusting ring control
Figure 3.2: Independent suspension system with metal adjusting rings for shock absorption.

3.3 Efficient Powertrain

Equipped with a 7.4V, 1500mAh lithium-ion battery with a 15C discharge rate, providing powerful output. Speeds can reach up to 32 km/h for brushed versions, and up to 45 km/h or even 70 km/h for brushless variants. Ball bearings throughout the vehicle improve power transmission efficiency, reduce energy loss, and ensure smoother operation.

Brushless motor with strong power
Figure 3.3: Brushless motor, capable of speeds up to 70 KM/H.
Powder metal grade fittings and professional chassis components
Figure 3.4: Key powertrain components including brushless 2847 motor, waterproof 45A ESC, metal hydraulic shock absorber, 3-wire 6kg servo, metal gear assembly, metal dog bone, metal differential, and metal drive shaft.
Three differentials distribution position
Figure 3.5: Location of the three differentials within the chassis for improved power distribution.

3.4 Thoughtful Details

  • Simulated Large Caster Wheels: Provide strong grip for stable driving on various terrains.
  • LED Lights: Two headlights and a roof light enhance visibility and appearance.
  • Metal Gears and Drive Shafts: Enhance durability and transmission efficiency.
  • Footrests: Provide stable support during maneuvering.
  • Rich Accessories: Includes 4 additional body pins, a small cross socket, and 4 snowflake gaskets for maintenance and modification.
RC car with LED bright lights
Figure 3.6: RC car demonstrating its bright LED lights for night driving.
Adjustable metal tie rod and front wheel angle
Figure 3.7: Adjustable metal tie rods for precise front wheel angle adjustment.
Metal transmission gear, widening wheel, and whole car metal bearing
Figure 3.8: Internal components highlighting metal transmission gear, widening wheels, and full metal bearings for enhanced durability.

3.5 Comprehensive Safety Protection

  • Charging Protection: Utilizes constant current and constant voltage balanced charging technology to protect against overcharging and overcurrent, extending battery life and ensuring charging safety.
  • Motor Anti-Stuck Protection: Automatically shuts down the motor if it becomes stuck to prevent damage.
  • High-Temperature Protection: The drive control circuit shuts down if the operating temperature exceeds a set value and automatically resumes when the temperature drops to a safe level.
  • Electronically Adjustable Low-Voltage Power-Off: Automatically shuts off the battery when its voltage drops below approximately 6.3-6.4V, preventing damage from over-discharge.

3.6 Exquisite Appearance and Packaging

Available in red and orange color options. The vehicle features a meticulously designed 1/10 scale body with a stylish and dynamic appearance. It is packaged in a sealed box, with accessories also color-matched and packaged for safe transportation and storage.

1:10 Brushless Big Foot High Speed Car with LED lights
Figure 3.9: The 1:10 scale brushless RC car in action, showcasing its high-speed capabilities and LED lighting.

4. Setup Instructions

  1. Install Remote Control Batteries: Install two AA batteries into the remote control. Ensure correct polarity. (Batteries are sold separately).
  2. Charge Vehicle Battery: Connect the vehicle's Li-ion battery to the provided USB charger using the USB cable. Charge for approximately 3.5 to 4 hours. Disconnect the charger once charging is complete.
  3. Power On and Bind: Turn on both the vehicle and the remote control. They should automatically bind to each other. Wait for the binding process to complete before operating.

5. Operating Instructions

Once the vehicle and remote control are bound, use the corresponding buttons and joysticks on the remote control to operate the car:

  • Steering Wheel: Controls the direction of the car (left/right).
  • Throttle Trigger: Controls the speed of the car (forward/reverse). Pull the trigger for forward motion, push for reverse/brake.
  • Trim Knobs (ST.TRIM, ST.D/R, SPEED): Use these to fine-tune steering and throttle response for optimal control.
  • Power Switch: Turns the remote control on or off.

During operation, always maintain an appropriate speed and distance from obstacles and other people to avoid collisions and ensure safety.

6. Maintenance and Care

  • Regular Inspection: Periodically inspect all components of the car. Promptly replace or tighten any damaged or loose parts.
  • Battery Care: When the vehicle battery level is low, recharge it promptly to prevent over-discharge, which can damage the battery.
  • Remote Control Battery: Replace the remote control's AA batteries promptly when they are low to ensure stable and reliable operation.
  • Cleaning: After use, especially after off-road driving, clean the car to remove dirt, dust, and debris from the chassis, wheels, and suspension components.
  • Storage: Store the RC car and its components in a dry, cool place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

ProblemPossible CauseSolution
Car does not respond to remote controlLow remote control batteries; Car/remote not powered on; Not bound; Out of range.Replace AA batteries in remote; Ensure both car and remote are ON; Re-bind the remote and car; Operate within 80-100m range.
Car stops unexpectedlyLow vehicle battery (low-voltage power-off); Motor stuck (anti-stuck protection); Overheating (high-temperature protection).Recharge vehicle battery; Check for obstructions in motor/drivetrain; Allow car to cool down.
Reduced speed or powerLow vehicle battery; Damaged motor/ESC; Dirt/debris in drivetrain.Recharge vehicle battery; Inspect motor/ESC for damage; Clean drivetrain components.
Steering issues (e.g., car pulls to one side)Steering trim incorrect; Damaged steering servo/linkage; Uneven tire wear.Adjust ST.TRIM on remote; Inspect and replace damaged parts; Check tire condition.

8. User Tips

  • For optimal performance, ensure the battery is fully charged before each use.
  • Regularly check and clean the wheels and suspension to prevent debris from affecting performance.
  • When driving at high speeds, be mindful of your surroundings to prevent accidents.

9. Package Contents

The package includes:

  • 1x RC Car
  • 1x Battery (7.4V, 1500 mAh Li-ion)
  • 1x Remote Controller
  • 1x USB Charging Cable
  • 1x Instruction Manual
  • 1x Accessories Bag (including 4 additional body pins, a small cross socket, and 4 snowflake gaskets)

10. Safety Warnings and Precautions

  • Age Restriction: The remote control car is not suitable for children under 3 years old. It should always be used under adult supervision.
  • Environmental Conditions: Do not use or store the remote control car in humid, hot environments, or in the presence of flammable materials.
  • Usage Duration: Avoid using the remote control car continuously for extended periods to prevent overheating of the motor and battery.
  • Read Manual: Please read this manual thoroughly before use to ensure safe and correct operation.
  • California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

11. Warranty and Support

For any issues, questions, or support needs regarding your HBX 2996/2996A RC Car, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.