FEKER Iceberg Switches

Contents

FEKER Iceberg Mechanical Keyboard Switches Instruction Manual

Model: Iceberg Switches

1. Introduction

Thank you for choosing FEKER Iceberg Mechanical Keyboard Switches. These switches are designed to provide a satisfying typing experience for mechanical keyboard enthusiasts. This manual will guide you through the installation, operation, and maintenance of your new switches.

2. Specifications

General Specifications:

  • Style: Iceberg
  • Switch Type: 3 Pin
  • Stem Type: Halo Switch Stems
  • Top Housing Material: Polycarbonate
  • Bottom Housing Material: Nylon
  • Durability: 70 Million Clicks
  • Mounting: Plate Mount
  • Compatibility: Mx-Compatible
  • Lubrication: Unlubed From The Factory
  • Quantity Options: Available in packs of 10, 30, 70, 90, or 110 pieces
  • Keyboard Compatibility: Suitable for most mechanical keyboards, including FEKER ik75/68/84/87, NJ80, MOD007 CNC 75%, TM680, etc.

Technical Data:

Technical Data for FEKER Iceberg Switches
Technical specifications for FEKER Iceberg switches.
  • Axis Material (Top Cover): PC material
  • Axis Material (Bottom Cover): Nylon molecular material
  • Axis Material (Stem): POM material
  • Spring: Double section extension spring
  • Axial Body Properties: Light pressure linear axis
  • Minimum Starting Strength: 43gf min
  • Stopping Force: 55gf Max

Additional Properties:

  • Axis Body Brand: Gaote
  • Full Size Keyboard: No
  • Package: No
  • Wrist Support: No
  • Style: Standard
  • Interface Type: USB (for compatible keyboards)
  • Battery Included: No
  • Operation Style: Mechanical
  • Language: English
  • Keyboard Standard: 104 Keys (for compatible keyboards)
  • Application: Desktop, Laptop, Number, Tablet
  • Type: Wired (for compatible keyboards)
  • Brand Name (Listed): cmany
  • Origin: Mainland China
  • Technology: Switches

3. Setup and Installation

These switches are designed for hot-swappable mechanical keyboards. Ensure your keyboard supports 3-pin switches before installation.

  1. Prepare Your Keyboard: Carefully remove any existing keycaps and switches from your keyboard.
  2. Align the Switch: Hold the FEKER Iceberg switch and align its three pins with the corresponding holes on your keyboard's PCB (Printed Circuit Board). Ensure the central stem is also aligned with the switch socket.
  3. Insert the Switch: Gently press the switch down until it clicks into place. Do not force it, as this can bend the pins. If resistance is met, remove the switch, check the pins for bends (refer to the diagram below), straighten them if necessary, and try again.
  4. Repeat for all Switches: Install all desired switches following the same procedure.
  5. Install Keycaps: Once all switches are installed, place your keycaps onto the switch stems.
Diagram of a 3-pin switch showing pin locations
Diagram illustrating the three pins of the switch for proper alignment.
Hand installing pink mechanical switches into a keyboard PCB
Visual guide for installing switches into a keyboard.

Video Installation Guide:

A short video demonstrating the installation process of mechanical switches into a keyboard.

4. Operation

Once installed, the FEKER Iceberg switches operate like standard mechanical keyboard switches. Each press registers a keystroke, providing a snappy and tactile response. The light pressure linear axis ensures a smooth and consistent feel across all keys.

5. Maintenance

To ensure the longevity and optimal performance of your FEKER Iceberg switches, consider the following maintenance tips:

  • Cleaning: Periodically remove keycaps and use compressed air to clear dust and debris from around and within the switches. A soft brush can also be used for stubborn particles.
  • Lubrication: These switches are shipped unlubed from the factory. For a smoother feel and reduced spring ping, you may choose to lubricate them. This typically involves disassembling the switch and applying a thin layer of specialized switch lubricant to the stem, housing, and spring. Refer to online guides for proper switch lubrication techniques if you are new to the process.
  • Handling: When removing or installing switches, always use a switch puller tool to avoid damaging the switch housing or bending the pins.

6. Troubleshooting

If you encounter issues with your switches, try the following:

  • Switch Not Registering:
    1. Carefully remove the keycap and then the switch using a switch puller.
    2. Inspect the pins on the bottom of the switch. If they are bent, gently straighten them with tweezers.
    3. Re-insert the switch, ensuring the pins align perfectly with the PCB sockets. Press firmly but gently until it clicks into place.
    4. Test the switch. If the issue persists, try swapping it with a known working switch to determine if the problem is with the switch itself or the keyboard PCB.
  • Inconsistent Feel/Sound:
    1. This can sometimes be resolved by lubricating the switches.
    2. Ensure the switch is fully seated in the PCB.
    3. Check for any debris caught inside the switch or around its housing.

7. User Tips

  • Lubrication for Performance: While functional out of the box, many users find that lubricating these switches significantly enhances their smoothness and reduces any potential spring noise.
  • RGB Lighting: Due to the opaque housing of the Iceberg switches, they may not allow as much per-switch RGB lighting to shine through compared to switches with clear housings. Plan your keyboard's lighting setup accordingly.
  • Tooling Updates: This batch of switches is produced with updated tooling, which may result in slight variations compared to older batches.

8. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase records handy as proof of purchase may be required.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.