Flipsky FT85CS

Contents

Flipsky FT85CS Waterproof ESC Instruction Manual

Model: FT85CS

1. Introduction

This manual provides detailed instructions for the Flipsky FT85CS Waterproof Electronic Speed Controller (ESC). The FT85CS is a high-performance, programmable ESC designed for demanding applications such as electric surfboards and efoils, offering robust control and protection features. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance of your device.

Flipsky FT85CS Waterproof ESC with connected cables
Figure 1: Flipsky FT85CS Waterproof ESC

2. Specifications

Parameter Value
Model FT85CS
Firmware V1.6 and above (firmware update via Flipsky ESC Tool supported)
Voltage Range 14V-85V (safe for 4-20S battery configurations)
Continuous Current 85V/150A (Values depend on mounting, ambient temperature, and air/water circulation)
Peak Current 250A
BEC Output 5V@1A
Power Wire Gauge 8 AWG (1200mm length)
Motor Wire Gauge 8 AWG (195mm length)
Programmable Tool Flipsky ESC TOOL
PWM Frequency Control Yes
Multiple Speed Gear Limit Control Yes (via UART)
Regenerative Capacity Yes
Communication Ports USB, CAN, UART, PPM, ADC
Control Signals Support PPM, ADC, UART (compatible with all FLIPSKY VX Series remotes)
Dimensions L93.8mm x W63mm x H26mm (with aluminum enclosure)
Waterproof Rating IP68
Certification CE

3. Features

  • Fully sealed design with IP68 waterproof rating for reliable operation in wet environments.
  • Equipped with an ARM Cortex-M4 structure (max 240MHz) for improved PWM switching frequency and motor RPM.
  • Programmable via Flipsky ESC Tool, allowing compatibility with various motor types, battery voltages, and control methods.
  • Supports programming via Flipsky remote controller VX4Pro (firmware version VX4Pro_V1.2 and above).
  • Features Motor FOC (Field-Oriented Control) for low working noise and smooth motor startup.
  • Ability to save and load configuration files using the ESC Tool.
  • Adaptive variable PWM frequency control.
  • Provides real-time data and fault alerts for enhanced monitoring and safety.
  • Supports multiple speed levels: Level 1 (Low), Level 2 (Medium), Level 3 (High).
  • Supports Sensorless Modes: IPDS, HFPI, OPEN.
  • Startup Modes Support: IPDS (sensorless), HFPI (sensorless), OPEN (Sensorless Open-Loop Startup).
  • Integrated Traction Control.
  • Supports various control types: Current, Duty Cycle, and Speed Control.
  • Emergency stop and shutdown functionality.
  • Safe power-on protection (available in PPM & ADC control modes only).
  • Comprehensive protection functions: low and high voltage protection, MOSFET over-temperature and over-current protection, and battery overcharge/discharge protection.

4. Setup and Wiring

Proper wiring is crucial for the safe and correct operation of the FT85CS ESC. Refer to the diagram below for connection details.

Detailed wiring diagram for Flipsky FT85CS ESC showing connections for Battery, Motor, UART, ADC, PPM, CAN, and USB.
Figure 2: FT85CS ESC Wiring Diagram

4.1. Connection Points:

  • Battery (B+/B-): Connect your battery pack to the main power input terminals. Ensure correct polarity (Red for B+, Black for B-). The ESC supports 4-20S battery configurations (14V-85V).
  • Motor (A, B, C): Connect the three phase wires from your motor to the A, B, and C terminals on the ESC. The order may affect motor rotation direction, which can be adjusted in the ESC Tool.
  • Input Signal Cable: This cable provides various communication and control ports.
  • 1. UART Port: Used for communication with external devices like remote receivers (e.g., Flipsky VX Series remotes) or telemetry modules. Pinout: GND, RX, TX, 5V.
  • 2. ADC Port: Analog-to-Digital Converter input, typically used for throttle input from analog sensors. Pinout: GND, ADC1, 3.3V.
  • 3. PPM Port: Pulse Position Modulation input, commonly used for standard RC receivers. Pinout: GND, 5V, S (Signal).
  • 4. CAN Port: Controller Area Network bus for inter-device communication, allowing multiple ESCs or other CAN-enabled devices to communicate. Pinout: GND, CAN-L, CAN-H.
  • 5. USB Port: Connect to a computer using a USB cable for programming and configuration via the Flipsky ESC Tool.

4.2. Initial Configuration:

After wiring, connect the ESC to your computer via the USB port. Use the Flipsky ESC Tool software to configure motor parameters, battery settings, control modes, and other advanced features. Ensure the firmware is up-to-date (V1.6 or above is recommended).

Flipsky FT85CS ESC with included signal and USB cables.
Figure 3: FT85CS ESC and accessory cables

5. Operation

5.1. Control Modes:

The FT85CS supports various control methods:

  • PPM (Pulse Position Modulation): Standard for RC remote controls.
  • ADC (Analog-to-Digital Converter): For analog throttle inputs.
  • UART (Universal Asynchronous Receiver-Transmitter): For digital communication with smart remotes (e.g., Flipsky VX Series) or other microcontrollers.

Ensure your chosen control method is correctly configured in the Flipsky ESC Tool.

5.2. Speed Levels:

The ESC supports three programmable speed levels: Low (Level 1), Medium (Level 2), and High (Level 3). These can be configured and switched via the connected remote control or programming tool, allowing for adaptable performance based on user preference or conditions.

5.3. Real-time Data and Alerts:

The ESC provides real-time operational data and fault alerts, which can be monitored through compatible display units or the Flipsky ESC Tool. Pay attention to any alerts to prevent damage and ensure safe operation.

5.4. Emergency Stop:

The ESC features an emergency stop function. Familiarize yourself with how to activate this feature via your remote control or system interface for immediate shutdown in critical situations.

6. Maintenance

The Flipsky FT85CS ESC is designed for durability with its IP68 waterproof rating, minimizing the need for extensive maintenance related to water exposure. However, general electronic care is recommended:

  • Regular Inspection: Periodically check all wiring connections for signs of wear, corrosion, or loose contacts. Ensure all cables are securely fastened.
  • Cleaning: After use, especially in saltwater environments, rinse the ESC and connectors with fresh water and allow them to dry completely before storage. Avoid using harsh chemicals.
  • Firmware Updates: Regularly check the Flipsky website for new firmware versions. Keeping the firmware updated ensures you have the latest features, performance improvements, and bug fixes. Use the Flipsky ESC Tool for updates.
  • Storage: Store the ESC in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

The FT85CS ESC incorporates several protection features to prevent damage. If you encounter issues, consider the following:

  • No Power/No Response: Check battery connections and voltage. Ensure the battery is charged and within the 14V-85V operating range. Verify all signal cables are correctly connected.
  • Motor Not Spinning/Erratic Behavior: Check motor phase wire connections. Ensure motor parameters are correctly configured in the Flipsky ESC Tool. If using sensorless mode, verify the selected startup mode (IPDS, HFPI, OPEN) is appropriate.
  • Over-temperature Protection: If the ESC shuts down or reduces power, it may be due to overheating. Check for adequate cooling (air/water circulation) around the device. Reduce load or operating time if necessary.
  • Over-current Protection: This indicates the motor is drawing too much current. Check for motor obstructions, short circuits, or incorrect motor/ESC parameter settings.
  • Low/High Voltage Protection: The ESC will protect itself if the battery voltage goes outside the safe operating range. Ensure your battery is compatible and properly charged/discharged.
  • Communication Issues: If the remote or programming tool cannot connect, check the respective communication port connections (UART, PPM, USB) and ensure drivers are installed for the USB connection.

If issues persist after basic troubleshooting, consult the Flipsky ESC Tool for detailed fault logs or contact Flipsky support.

8. User Tips

  • Waterproofing Integrity: While rated IP68, always double-check that all connections are sealed and the enclosure is intact before exposing the ESC to water.
  • Cable Management: Secure all cables to prevent them from snagging or vibrating loose during operation. Use cable ties or appropriate routing solutions.
  • Heat Dissipation: Even with an aluminum enclosure, ensure the ESC has sufficient airflow or is mounted in a way that allows for effective heat dissipation, especially during high-current operation.
  • Software Updates: Regularly update the Flipsky ESC Tool and ESC firmware to benefit from the latest features and stability improvements.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or Flipsky directly through their official website. Ensure you have your product model (FT85CS) and any purchase details available when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.