LinYuvo KS37 JoyPad Controller User Manual

1. Introduction

The LinYuvo KS37 JoyPad Controller is a versatile gaming accessory designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, PC, Android, iOS, and Steam. Featuring advanced Hall Effect joysticks to prevent drift, 6-axis gyro motion control, adjustable dual vibration, and customizable RGB lighting, this controller offers precision, immersion, and comfort. Its ergonomic design and programmable back buttons provide a competitive edge for both casual and serious gamers.

2. Product Features

• Hall Effect Joysticks: Advanced magnetic sensors for ultimate precision and a longer lifespan, eliminating stick drift.
• Multi-Platform Compatibility: Seamlessly connects to PC, Nintendo Switch, Android, iOS, and Steam.
• Connection Options: Supports USB (wired), Bluetooth (BLE/BT2.1+EDR), and 2.4G wireless connections.
• 6-Axis Gyro Motion Control: Provides immersive experience and enhanced aim for motion-sensing games.
• Adjustable Dual Vibration: Built-in dual vibration motors with 4 levels of vibration feedback (0%, 25%, 50%, 75%, 100%).
• 2 Programmable Back Buttons: Map complex commands for a competitive edge.
• Nintendo Switch Layout: Familiar (X/B/Y/A) button layout, perfect for Switch gamers.
• Ergonomic & Anti-Slip Grip: Comfortable design with non-slip grip on the back for long gaming sessions.
• Turbo Function: Dedicated TURBO button with adjustable rapid-fire speeds (5, 12, 20 shots/second).
• 8-Color RGB Lighting: Adjustable joystick lighting in 8 vibrant colors (Red, Yellow, Blue, Green, Cyan, Orange, Purple) and different lighting modes.
• Wake Up Function: Quickly wakes up the connected console (e.g., Nintendo Switch).
• Screenshot Function: Dedicated button to capture in-game moments.
• Long-Lasting Battery: Two 500mAh Li-Polymer batteries provide up to 5-6 hours of gaming or 25 days of standby time.
• D-pad Switch Type: Tactile switch.
• ABXY Switch Type: Membrane.
• Bumpers Switch Type: Membrane.
• Trigger Button Type: Hall-Linear.

3. Setup Guide

3.1 Unboxing and Initial Check

Before first use, please ensure all components are present in the package:

• LinYuvo KS37 JoyPad Controller
• USB Charging Cable
• User Manual (this document)

3.2 Charging the Controller

The controller comes with two built-in 500mAh Li-Polymer batteries. For optimal performance, fully charge the controller before its first use.

1. Connect the USB charging cable to the charging port on the controller.
2. Connect the other end of the USB cable to a power source (e.g., a USB wall adapter, computer USB port, or console dock).
3. The charging indicator lights will show the charging status. A full charge typically takes approximately 3 hours.

Note: The controller can be used while charging.

3.3 Connecting to Devices

3.3.1 Nintendo Switch / Switch OLED / Switch Lite (Wireless)

1. On your Nintendo Switch console, go to the HOME Menu.
2. Select 'Controllers' > 'Change Grip/Order'.
3. Press and hold the pairing button on the LinYuvo KS37 controller until the indicator lights start flashing rapidly.
4. Once connected, the indicator light(s) on the controller will remain solid.

Figure 1: LinYuvo KS37 Controller compatibility with Nintendo Switch models.

3.3.2 PC / Android / iOS / Steam (Bluetooth)

1. Ensure Bluetooth is enabled on your device (PC, Android, iOS).
2. Press and hold the pairing button on the LinYuvo KS37 controller until the indicator lights start flashing rapidly.
3. On your device, search for new Bluetooth devices and select 'LinYuvo KS37' (or similar name) from the list.
4. Once paired, the indicator light(s) on the controller will remain solid.

3.3.3 Wired Connection (USB)

For PC or other compatible devices, you can connect the controller directly via the USB cable:

1. Connect one end of the USB cable to the controller.
2. Connect the other end to a USB port on your PC or device.
3. The controller should be automatically recognized and ready for use.

4. Operating Instructions

4.1 Power On/Off

• Power On: Press the Home button (LinYuvo logo) to turn on the controller.
• Power Off: Press and hold the Home button for a few seconds, or the controller will automatically power off after a period of inactivity.

4.2 Wake Up Function

When connected to a Nintendo Switch, press the dedicated 'Wake Up' button (often the Home button or a specific button indicated in the image) to quickly wake up the console from sleep mode.

Figure 2: Location of the Wake Up Function and Screenshot Key.

4.3 Vibration Adjustment

The controller features adjustable dual vibration with 4 levels of feedback. Use the designated vibration adjustment button or combination (refer to specific button mapping in the manual or on the device) to cycle through the intensity levels: 0%, 25%, 50%, 75%, and 100%.

Figure 3: Visual representation of adjustable dual vibration feedback.

4.4 RGB Lighting Adjustment

The joysticks feature 8-color RGB lighting. Use the dedicated RGB lighting button or combination to:

• Change between 8 colors (Red, Yellow, Blue, Green, Cyan, Orange, Purple, White).
• Cycle through different lighting modes (e.g., static, breathing, rainbow).
• Adjust brightness levels.

Figure 4: Adjustable RGB ring lights on the joysticks.

4.5 Turbo Function

The Turbo function allows for rapid, repetitive action with a single button press.

1. Activate Turbo: Press and hold the 'T' (Turbo) button, then press the action button you wish to apply Turbo to (e.g., A, B, X, Y). The action button will now rapidly repeat when held down.
2. Adjust Turbo Speed: While holding the 'T' button, press the joystick up or down to cycle through different speeds: 5 shots/second, 12 shots/second, and 20 shots/second.
3. Deactivate Turbo: Repeat step 1 (hold 'T' and press the action button) to turn off Turbo for that specific button.

Figure 5: Turbo Function settings and speeds.

4.6 Programmable Back Buttons

The controller features two programmable back buttons (often labeled M1/M2 or 3L/3R). These can be mapped to other buttons for convenient operation.

1. Enter Programming Mode: Press and hold the 'M' button (or a dedicated programming button) until an indicator light flashes.
2. Select Button to Map: Press the back button (e.g., 3L or 3R) you wish to program.
3. Select Target Button: Press the button you want to map to the back button (e.g., A, B, X, Y, L, R, ZL, ZR).
4. Exit Programming Mode: Press the 'M' button again to save the mapping. The indicator light will stop flashing.

Figure 6: Programmable mapping function for back buttons.

4.7 6-Axis Gyro Motion Control

The built-in 6-axis gyroscope provides precise motion control for compatible games. This feature is automatically active when supported by the game and connected platform (e.g., Nintendo Switch).

Figure 7: 6-Axis Gyro Motion Control in action.

4.8 Screenshot Function

Press the dedicated Screenshot button (refer to Figure 2) to capture in-game screenshots. These screenshots will be saved to your connected device's gallery or console's album.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in use for extended periods.
• Avoid Drops: Protect the controller from drops and impacts, which can damage internal components.

6. Troubleshooting

• Controller not connecting: Ensure the controller is charged. Re-attempt pairing by following the connection instructions for your specific device. Make sure Bluetooth is enabled on your device.
• Input lag or disconnection: Move closer to your device to reduce interference. Ensure no other wireless devices are causing interference.
• Buttons not responding: Check if the controller is properly connected. If the issue persists, try resetting the controller (if a reset button is available, typically a small pinhole on the back).
• Joystick drift: The LinYuvo KS37 features Hall Effect joysticks designed to prevent drift. If you experience drift, ensure the controller's firmware is up to date (check manufacturer's website) or try recalibrating joysticks through your console/device settings.
• Vibration not working: Check if vibration is enabled in your game or console settings. Ensure the vibration intensity is not set to 0%.
• RGB lights not working: Ensure the controller is powered on and try cycling through the RGB lighting modes and colors.

7. Specifications

8. User Tips

• For the best gaming experience, ensure your controller's battery is adequately charged before long play sessions.
• Experiment with different vibration levels and RGB lighting modes to find your preferred setup for various games.
• Utilize the programmable back buttons to map frequently used actions, which can significantly improve reaction time in fast-paced games.
• Keep the controller's firmware updated by checking the manufacturer's official website for the latest versions.

9. Warranty and Support

Your LinYuvo KS37 JoyPad Controller comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly through their official support channels.