QYT KT-A16

Contents

QYT KT-A16 Air Band Radio Instruction Manual

Model: KT-A16

1. Introduction

The QYT KT-A16 is a high-power 6W handheld air band radio designed for reliable communication within the aviation frequency spectrum. Featuring a superheterodyne circuit, a 1.77-inch TFT-LCD color screen, and 200 memory channels, this device offers robust performance for both transmission and reception.

QYT KT-A16 Air Band Radio with airplane background
QYT KT-A16 Air Band Radio highlighting 6W power and 2000mAh battery.

2. Package Contents

Before using your QYT KT-A16 radio, please ensure all items are present in the package:

Standard Package Contents of QYT KT-A16
Visual representation of the standard package contents.
  • 1 × Radio Body
  • 1 × Battery Pack (2000mAh)
  • 1 × Antenna
  • 1 × AC Adapter
  • 1 × Desktop Charger
  • 1 × Belt Clip
  • 1 × Hand Strap
  • 1 × English Manual

Note: Other accessories may vary depending on your specific purchase option.

3. Setup

3.1. Battery Installation and Charging

  1. Insert the 2000mAh battery pack into the compartment on the back of the radio, ensuring it clicks securely into place.
  2. Connect the AC adapter to the desktop charger.
  3. Place the radio (with battery installed) into the desktop charger. The charging indicator will illuminate.
  4. Charge the battery fully before first use. A full charge typically takes several hours.

3.2. Antenna Attachment

Screw the provided antenna clockwise onto the antenna connector on the top of the radio until it is finger-tight. Do not overtighten.

3.3. Belt Clip and Hand Strap

Attach the belt clip to the back of the radio using the provided screws. The hand strap can be threaded through the loop on the side or top of the radio for secure carrying.

4. Operating Instructions

4.1. Radio Parts and Controls

Diagram of QYT KT-A16 radio parts and controls
Key components and controls of the KT-A16 radio.
  1. Antenna: For transmitting and receiving signals.
  2. Progress Knob: Used for navigation and selection in menus.
  3. Power/Volume Knob: Turns the radio on/off and adjusts volume.
  4. LCD Color Screen: Displays operational information.
  5. Microphone: For voice input during transmission.
  6. MENU Key: Accesses the main menu.
  7. UP Key: Navigates up in menus or increases frequency/channel.
  8. Numeric Keypad: For direct frequency input and menu selections.
  9. EXIT Key: Exits menus or functions.
  10. DOWN Key: Navigates down in menus or decreases frequency/channel.
  11. Long Press Scan Switch: Initiates scanning.
  12. Long Press Keylock Switch: Locks/unlocks the keypad.
  13. External Speaker/MIC Connector: For connecting external audio accessories.
  14. Belt Clip: For attaching the radio to a belt.
  15. VFO/MR Key/Emergency Key: Switches between VFO (Variable Frequency Oscillator) and Memory Recall modes, also functions as an emergency key.
  16. PTT (Push-to-Talk) Key: Activates transmission.
  17. Backlit Button: Controls screen backlight.
  18. ASQ Key (MONI): Adjusts Automatic Squelch Level or monitors channels.

4.2. Screen Display Instructions

The 1.77-inch TFT-LCD color screen provides essential information at a glance:

QYT KT-A16 Screen Display Instructions
Explanation of icons and indicators on the radio's display.
  • Power Output Indicator Bar: Shows current transmission power level.
  • Battery Level Indicator: Displays remaining battery charge.
  • Current TX/RX Status: Indicates if the radio is transmitting or receiving.
  • Battery Save Enabled: Icon indicating battery save mode is active.
  • Current Working Mode: Shows the active mode (e.g., AM).
  • Battery Voltage Indicator: Displays current battery voltage (e.g., DC: 8.1V).
  • Main Frequency: The primary operating frequency.
  • Noise Intensity: Indicates the level of background noise.
  • Secondary Frequency: A secondary displayed frequency.
  • Signal Strength: Shows the strength of the received signal.
  • Model: Displays the radio model (KT-A16).

4.3. Frequency Ranges and Channels

  • Transmit (TX) Frequency: 118.00000-136.99975MHz
  • Receive (RX) Frequency: 108.00000-136.99975MHz
  • Weather (WX) Frequency: 161.650-163.275MHz (for NOAA Weather forecast Channels in USA)
  • Memory Channels: The radio supports 200 programmable memory channels.
  • Channel Spacing: 25kHz/8.33kHz (for AM mode). Note: 8.33K refers to AM Mode Channel Spacing, not Frequency Step.
  • Frequency Step: 2.50/5.00/6.25/10.00/12.50/25.00K.

4.4. Basic Operation

  1. Power On/Off: Rotate the Power/Volume Knob clockwise to turn on, counter-clockwise to turn off.
  2. Volume Adjustment: Rotate the Power/Volume Knob to adjust the audio level.
  3. Frequency/Channel Selection: Use the UP/DOWN keys or the Numeric Keypad to enter frequencies directly. Use the Progress Knob for fine-tuning or navigating through channels.
  4. Transmit (PTT): Press and hold the PTT key to transmit. Release to receive.
  5. Menu Navigation: Press the MENU key to enter the menu. Use UP/DOWN keys and the Progress Knob to navigate and select options. Press EXIT to leave the menu.
  6. Keypad Lock: Long press the Keylock Switch to lock or unlock the keypad, preventing accidental input.

4.5. Advanced Features

  • Scanning: The radio supports Time, Carrier, or Search scanning modes. Long press the Scan Switch to activate.
  • VOX (Voice Operated Transmit): Enables hands-free transmission when voice is detected. Configure in the menu.
  • Squelch Level Adjustment: Adjust the squelch level to filter out weak signals and background noise. This can be done via the ASQ Key (MONI) or through the menu.
  • PC Programming: The radio supports PC programming for advanced configuration and channel management. Contact the seller for the necessary software.

5. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Store the radio and battery in a cool, dry place when not in use for extended periods.
  • Environmental Protection: The radio has an IP45 waterproof rating, meaning it is protected against solid objects larger than 1mm and against low-pressure water jets from any direction. Avoid submerging the radio in water.
  • Antenna Care: Ensure the antenna is securely attached. Do not bend or force the antenna, as this can damage the connector or reduce performance.

6. Troubleshooting

  • No Power: Ensure the battery is fully charged and correctly installed. Check the Power/Volume knob is turned on.
  • Cannot Transmit/Receive: Verify the antenna is properly attached. Check the frequency settings and ensure you are within the allowed transmit/receive ranges. Adjust squelch level if receiving only noise.
  • Poor Audio Quality: Check volume settings. Ensure the microphone is not obstructed. If using an external headset, ensure it is properly connected and compatible.
  • Keypad Unresponsive: Check if the keypad lock is activated. Long press the Keylock Switch to unlock.

If you encounter issues not covered here, please refer to the full English manual or contact customer support.

7. Specifications

QYT KT-A16 Technical Parameters
CategoryParameterValue
GeneralTX Frequency Range118.00000-136.99975MHz
RX Frequency Range108.00000-136.99975MHz
WX Frequency Range161.650-163.275MHz
Channel Spacing25kHz/8.33kHz
Mode6k00A3E/5K60A3E 16K0G3E(WX)
Number of Memory Channels200
Antenna Impedance50ohm
Power Supply Requirement7.2V DC
Operating Temperature Range-10°C to +60°C (14°F to 140°F)
TransmitterOutput Power6.0W (PEP), 1.8W (CW)
Modulation Limiting70-100%
Audio Harmonic DistortionLess than 10% (at 60% modulation)
Hum and Noise RatioMore than 35dB
Spurious EmissionsMore than 46dB
ReceiverReceive SystemDouble conversion superheterodyne
Intermediate Frequencies1st 46.35MHz, 2nd 450kHz
Sensitivity (COM/NAV)Less than 0dBu (at 6dB S/N) / Less than 3dBu (at 6dB S/N)
Sensitivity (WX)Less than -8dBu (at 12dB SINAD)
Spurious Response Rejection Ratio (COM/NAV)More than 60dB

8. User Tips

  • Frequency Software: For advanced frequency programming, dedicated software is available. Please contact the seller directly to obtain this software.
  • Headset Compatibility: When connecting an external headset, ensure its pinout configuration is compatible with the radio's external speaker/MIC connector to avoid damage or malfunction. Refer to the full manual for detailed pinout specifications if available.

9. Warranty and Support

This product comes with a 1-year warranty. For any technical assistance, troubleshooting beyond this manual, or inquiries regarding frequency programming software, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.