Introduction
The Pinmany RZ-MB61 CAN Bus Decoder is a specialized data converter designed to facilitate the integration of aftermarket Android head units with the existing CAN Bus system in compatible Mitsubishi vehicles. This device ensures proper communication between the Android head unit and the vehicle's electronic systems, enabling functions such as steering wheel controls and other vehicle data display.
Safety Information
- Installation should be performed by individuals with professional knowledge of automotive electronics and wiring.
- Ensure the vehicle's power is disconnected before beginning installation to prevent electrical damage or injury.
- Operating voltage range is +9V to +16V. Voltages outside this range can damage the decoder.
- Improper wiring can cause irreversible damage to the CAN Bus decoder and potentially other vehicle components.
Setup and Installation
1. Pre-Installation Considerations
- This product does not include connection cables. If you do not have suitable cables, it is recommended to purchase a CAN Bus adapter that includes them.
- The CAN Bus decoder is compatible only with Android head units featuring 8-pin connectors and serial communication capabilities.
- Before purchasing or installing, verify that your Android radio's CAN Bus settings menu displays your car model. Refer to the "CAN Bus Settings on Android Head Unit" section for guidance.
2. Physical Connection (Step 1)
- Identify the 16-pin and 20-pin CAN plugs on your wire harness.
- Carefully plug these connectors into the corresponding 16-pin and 20-pin sockets on the CAN Bus Decoder.
3. Pin Definition
Strictly adhere to the pin definitions provided below for correct wiring. Incorrect wiring can damage the CAN Bus decoder.
| Pin No. | Definition | Pin No. | Definition |
|---|---|---|---|
| 1 | NC | 9 | NC |
| 2 | NC | 10 | NC |
| 3 | CAN2-H | 11 | NC |
| 4 | CAN2-L | 12 | NC |
| 5 | NC | 13 | NC |
| 6 | NC | 14 | NC |
| 7 | NC | 15 | NC |
| 8 | NC | 16 | NC |
| Pin No. | Definition | Pin No. | Definition |
|---|---|---|---|
| 1 | GND | 11 | IE-BUS+ |
| 2 | BATT(+12V) | 12 | IE-BUS- |
| 3 | CAN-H | 13 | UART-RX |
| 4 | CAN-L | 14 | NC/REV-IN |
| 5 | NC | 15 | SWC |
| 6 | NC | 16 | UART-TX |
| 7 | NC | 17 | BUS-DET |
| 8 | REV-OUT | 18 | NC |
| 9 | NC | 19 | NC |
| 10 | CAM-PWR | 20 | ACC-IN |
Operating Instructions
CAN Bus Settings on Android Head Unit (Steps 2 & 3)
The following steps outline the general procedure for configuring the CAN Bus on your Android head unit. Specific menu paths and options may vary depending on your head unit's manufacturer and software version. If you encounter difficulties, consult your head unit vendor's manual or support.
- Access Settings: From the Android head unit's home screen, navigate to "Settings".
- Enter Factory Settings: Locate and enter "Factory" or "Factory Settings". You may be prompted for a password. Common factory passwords include: 3368, 1617, 8317, 8888. If these do not work, contact the seller of your Android radio for the correct password.
- Navigate to CAN Bus Settings: Within the factory settings, find and select "CAN Bus Settings" or a similar option like "CarType Setting" or "CAN Related Settings".
- Select Manufacturer and Model:
- Select the CAN Bus Box manufacturer, which is typically "RAISE".
- Choose the correct car model and year from the list. For example, for Mitsubishi, select the specific model like "MITSUBISHI_R01(2018 Eclipse Cross)" or "MITSUBISHI_R05(2020 Pajero Sport (Thailand))".
- Save and Reboot: After selecting the appropriate settings, save your changes and reboot the Android head unit for the new configuration to take effect.
Maintenance
The Pinmany RZ-MB61 CAN Bus Decoder is designed for maintenance-free operation. Ensure it is installed in a dry environment, away from extreme temperatures and direct sunlight. Avoid physical damage to the unit or its connectors.
Troubleshooting
- No Communication:
- Verify all wiring connections are secure and correctly matched according to the pin definition diagram (Figure 4).
- Ensure the Android head unit's CAN Bus settings are correctly configured for "RAISE" and your specific Mitsubishi model.
- Check the operating voltage of the vehicle's electrical system; it must be within +9V to +16V.
- Incorrect Functionality (e.g., Steering Wheel Controls):
- Re-check the CAN Bus settings on the Android head unit, ensuring the correct car model and year are selected.
- If the issue persists, consult the Android head unit's manual for specific CAN Bus learning or calibration procedures.
- Unknown Factory Password for Android Head Unit:
- Try the common passwords: 3368, 1617, 8317, 8888.
- If none work, contact the seller or manufacturer of your Android head unit for assistance.
- Physical Damage to Decoder:
- If the decoder appears physically damaged or was subjected to incorrect voltage/wiring, it may need replacement.
Specifications
| Feature | Detail |
|---|---|
| Model Name | RZ-MB61 |
| Brand | Pinmany |
| Manufacturer | RAISE |
| Special Features | CAN Bus Data Converter |
| Item Weight | 50g |
| Item Size | 73.5mm x 46.5mm x 18.5mm (approx. ±1mm error) |
| Operating Voltage | +9V to +16V (Nominal 12V) |
| Interface | 16-PIN, 20-PIN (PH2.0 pin pitch) |
| Material | Black plastic shell |
| Origin | Mainland China |
| Suitable Head Units | Android 7", 8", 9", 10" and similar sizes |
| Compatible Car Models | Mitsubishi Eclipse Cross (2018-2021), Mitsubishi Pajero Sport (2020-2022), Mitsubishi Xpander (2024) |
User Tips
- For optimal performance and to avoid potential damage, it is highly recommended to have the CAN Bus decoder installed by a qualified automotive technician.
- Always double-check the wiring against the provided pin definition diagram before powering on the system.
- Keep a record of your Android head unit's factory password, or know how to retrieve it, as it is crucial for CAN Bus configuration.
Support
For any questions regarding the installation, operation, or compatibility of your Pinmany RZ-MB61 CAN Bus Decoder, please contact the seller or manufacturer for assistance. Providing details of your vehicle model, year, and Android head unit model will help expedite support.