AULA NOVA75 3-Mode Mechanical Keyboard User Manual

1. Introduction

The AULA NOVA75 is a high-performance 3-mode mechanical keyboard designed for gaming and productivity. It features a compact 75% layout, versatile connectivity options, a large battery capacity, and extensive customization capabilities. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your NOVA75 keyboard.

2. Package Contents

Please check the package for the following items:

• AULA NOVA75 Mechanical Keyboard
• USB-C to USB-A Cable
• 2.4GHz Wireless Dongle
• Keycap Puller & Switch Puller
• User Manual (this document)

3. Setup

3.1 Initial Charging

Before first use, it is recommended to fully charge the keyboard. Connect the provided USB-C to USB-A cable to the keyboard's USB-C port and a power source (e.g., computer USB port or wall adapter). The keyboard features a massive 10,000mAh battery with USB-C PD 3.0 compatibility for fast charging. A battery indicator on the smart screen will show the real-time power level.

3.2 Connectivity Modes

The AULA NOVA75 supports three connectivity modes:

• 2.4GHz Wireless: For competitive gaming with less than 1ms response time.
• Bluetooth 5.2: Connect up to 3 devices simultaneously for multi-device productivity.
• Wired USB-C: Provides zero latency and allows simultaneous charging.

3.2.1 2.4GHz Wireless Setup

1. Locate the 2.4GHz wireless dongle in the package.
2. Plug the dongle into an available USB-A port on your computer.
3. Switch the keyboard's mode selector to 2.4GHz. The keyboard should automatically connect.

3.2.2 Bluetooth Setup

1. Switch the keyboard's mode selector to Bluetooth.
2. On your device (computer, tablet, phone), go to Bluetooth settings and enable Bluetooth.
3. The keyboard should appear as 'AULA NOVA75' (or similar) in the list of available devices. Select it to pair.
4. You can pair up to 3 Bluetooth devices. Refer to the keyboard's specific key combinations for switching between paired devices (usually Fn + 1/2/3).

3.2.3 Wired USB-C Setup

1. Connect the USB-C end of the cable to the keyboard's USB-C port.
2. Connect the USB-A end of the cable to an available USB-A port on your computer.
3. Switch the keyboard's mode selector to Wired (USB-C). The keyboard will be recognized automatically.

3.3 Software Installation

For advanced customization, including key remapping, macro programming, and RGB lighting control, download and install the AULA Driver Software from the official AULA website. This software allows you to save up to 5 custom profiles on the keyboard's onboard memory.

4. Operating Instructions

4.1 Basic Key Functions

The NOVA75 features a 75% compact layout with 84 keys, including arrow keys and a function row. It supports N-Key Rollover and Anti-Ghosting for precise input during intense gaming sessions.

4.2 Smart Screen and Rotary Knob

The keyboard is equipped with a 1.14-inch HD smart screen that supports various system information displays and player-customized settings. The multifunctional rotary knob simplifies screen adjustments and can be used for volume control or other customizable functions.

The smart screen allows uploading of GIF and JPG images for personalized display. Refer to the AULA Driver Software for detailed instructions on customizing the screen content.

4.3 RGB Lighting Control

The keyboard features per-key RGB backlighting with 16.8 million colors and multiple dynamic effects. You can customize lighting patterns, adjust brightness, and even enable a music sync mode where RGB reacts to your music rhythm. Use the AULA Driver Software for full control over the RGB lighting system.

5. Maintenance

5.1 Cleaning

To clean your keyboard, disconnect it from all power sources. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. For cleaning between keycaps, use compressed air or a small brush. Avoid spraying liquids directly onto the keyboard.

5.2 Keycap and Switch Replacement

The AULA NOVA75 features hot-swappable PCB, supporting 3-pin/5-pin mechanical switches. This allows you to easily replace switches without soldering. Use the provided keycap puller to remove keycaps and the switch puller to remove switches.

When installing new switches, ensure the pins are aligned correctly with the PCB sockets to prevent damage.

5.3 Battery Care

The 10,000mAh battery is designed for long life. To maximize battery longevity, avoid completely draining the battery frequently. The keyboard is equipped with an NTC overcharge protection mechanism to prevent damage from overcharging.

6. Troubleshooting

• Keyboard not responding:
  • Ensure the keyboard is charged or connected via USB-C.
  • Check the connectivity mode switch (2.4GHz, Bluetooth, Wired) is set correctly.
  • For 2.4GHz, ensure the dongle is securely plugged in.
  • For Bluetooth, ensure it's paired and selected on your device.
  • Try restarting your computer or device.
• Keys not registering:
  • Check if the specific switch is properly seated. If hot-swappable, try reseating or replacing the switch.
  • Clean any debris around the keycap or switch.
• RGB lighting issues:
  • Ensure the keyboard is powered on.
  • Check lighting settings in the AULA Driver Software.
  • Reset lighting effects to default via software or keyboard shortcuts (refer to software manual).
• Battery not charging:
  • Ensure the USB-C cable is securely connected to both the keyboard and the power source.
  • Try a different USB-C cable or power adapter.
  • Ensure the power source is functional.
• Smart screen not displaying:
  • Ensure the keyboard is powered on.
  • Check settings related to the smart screen in the AULA Driver Software.
  • If uploading custom images, ensure the process is complete and the file format is correct (GIF/JPG).

7. Specifications

8. User Tips

• Game-Specific Profiles: Use the AULA Driver Software to create game-specific profiles with custom macros and lighting effects for an optimized gaming experience.
• Multi-Device Productivity: Leverage the Bluetooth 5.2 connectivity to seamlessly switch between up to three devices, enhancing your workflow.
• Personalize Your Display: Take advantage of the 1.14-inch HD smart screen to upload custom GIFs or JPGs, making your keyboard uniquely yours.

9. Warranty and Support

AULA products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official AULA website or contact your retailer. Keep your purchase receipt as proof of purchase.