APWIKOGER H806 4G LTE WiFi Router User Manual

1. Introduction

The APWIKOGER H806 is a portable 4G LTE WiFi Router designed to provide high-speed internet access on the go. With its built-in battery and support for 4G/3G networks, it allows you to create a personal Wi-Fi hotspot and share internet connectivity with multiple devices simultaneously.

2. Package Contents

Please check the package for the following items:

• 1 x H806 4G LTE WiFi Router
• 1 x Charging Cable (USB)
• 1 x User Manual

Figure 2.1: Package Contents

3. Device Overview

Figure 3.1: H806 Device Components and Display Indicators

3.1 OLED Display Indicators

The OLED display provides real-time information about the device's status:

• Network Type and Signal Strength: Indicates the current cellular network (e.g., 4G) and signal reception.
• Internet Connected: Shows if the device has an active internet connection.
• Data Usage: May display current data consumption.
• WiFi Open and User Number: Indicates if Wi-Fi is active and the number of connected users.
• Battery Level: Shows the remaining battery charge.
• Message Icon: May indicate new messages or notifications.

3.2 Device Label Information

The device label, typically found under the battery cover, contains important network details:

• Model: H806
• IP Address: 192.168.100.1 (for web interface access)
• User: admin (default username for web interface)
• Password: admin (default password for web interface)
• SSID: 4G - MiFi-E77 (default Wi-Fi network name)
• WIFI KEY: 1234567890 (default Wi-Fi password)

4. Setup Instructions

4.1 Battery Installation

1. Carefully remove the back cover of the H806 router.
2. Insert the provided 2100 mAh lithium battery into the battery compartment, ensuring the contacts align correctly.
3. Replace the back cover.

4.2 SIM Card Insertion

The H806 router requires a 4G SIM card for internet access.

1. With the back cover removed (as in battery installation), locate the SIM card slot.
2. Insert your 4G SIM card into the designated slot. Ensure the SIM card is oriented correctly according to the diagram or markings on the device.
3. Gently push the SIM card until it clicks into place.

4.3 Charging the Device

Before first use, fully charge the device.

1. Connect the provided USB charging cable to the H806 router's charging port.
2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
3. The battery indicator on the OLED display will show charging status.

5. Operating Instructions

5.1 Powering On/Off

• To Power On: Press and hold the power button (usually on the side) for a few seconds until the OLED display lights up.
• To Power Off: Press and hold the power button until the device powers down.

5.2 Connecting to the Wi-Fi Hotspot

Once the H806 is powered on and has established a cellular connection, you can connect your devices:

1. On your Wi-Fi enabled device (smartphone, laptop, tablet), open the Wi-Fi settings.
2. Search for available Wi-Fi networks.
3. Select the network name (SSID) displayed on the H806's device label (e.g., "4G - MiFi-E77").
4. Enter the Wi-Fi Key (password) also found on the device label (e.g., "1234567890").
5. Your device should now be connected to the internet through the H806 router.

The H806 supports sharing with up to 10 users simultaneously.

Figure 5.1: Sharing WiFi with Multiple Devices

5.3 Accessing the Web Management Interface

You can manage your router settings via a web interface:

1. Ensure your device is connected to the H806's Wi-Fi network.
2. Open a web browser on your connected device.
3. Enter the IP address (e.g., 192.168.100.1) into the browser's address bar and press Enter.
4. When prompted, enter the default username "admin" and password "admin" (as found on the device label).
5. You can now access and modify settings such as Wi-Fi name, password, and other network configurations.

6. Maintenance

6.1 Battery Care

• Avoid exposing the battery to extreme temperatures (hot or cold) as this can reduce its lifespan.
• If storing the device for an extended period, ensure the battery is partially charged (around 50%) to maintain its health.
• Use only the provided charging cable or a compatible replacement.

6.2 Cleaning

• Use a soft, dry cloth to clean the exterior of the device.
• Avoid using liquid cleaners or abrasive materials, which could damage the device.

6.3 Firmware Updates

Periodically check the manufacturer's website or the device's web management interface for available firmware updates. Updates can improve performance, add features, and enhance security.

7. Troubleshooting

7.1 No Internet Connection

• Check SIM Card: Ensure the 4G SIM card is correctly inserted and activated.
• Check Signal: Verify the signal strength indicator on the OLED display. If signal is weak or absent, move to an area with better reception.
• Frequency Band Compatibility: Confirm that the router's supported frequency bands (4G LTE: B1/B3/B5/B40; 3G UMTS WCDMA: B1/B8) are compatible with your local operator's network.
• Reboot Device: Power off the router, wait a few seconds, and then power it back on.

7.2 Slow Internet Speed

• Signal Strength: A weak cellular signal will result in slower speeds.
• Number of Users: If many devices are connected and actively using the internet, speeds may be reduced for all users.
• Data Cap: Check if your SIM card plan has a data cap or throttling after a certain usage.

7.3 Device Not Powering On

• Battery Charge: Ensure the battery is charged. Connect the device to a power source and check if the charging indicator appears.
• Battery Installation: Verify the battery is correctly installed.

7.4 Forgetting Wi-Fi Password or Admin Login

If you forget your Wi-Fi password or the web interface login credentials after changing them, you may need to perform a factory reset. Refer to the physical user manual for specific reset instructions, or look for a small reset button on the device (often requiring a pin to press).

8. Specifications

9. User Tips

• Check Frequency Bands: Before purchasing or using in a new region, always verify that the router's supported 4G LTE and 3G UMTS frequency bands are compatible with your local mobile network operator. This is crucial for optimal performance.
• Secure Your Network: For enhanced security, it is highly recommended to change the default Wi-Fi SSID and password, as well as the web management interface login credentials, from the factory defaults.
• Optimal Placement: For the best signal reception and Wi-Fi coverage, place the router in an open area, away from obstructions and other electronic devices that might cause interference.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the specific terms provided by your retailer or contact the seller directly. Keep your purchase receipt as proof of purchase.