1. Product Overview
The ANDELI MIG-270P PRO is a versatile, full-function double-pulse MIG welding machine designed for a wide range of welding applications. It integrates MIG, Lift TIG, and MMA welding capabilities, making it suitable for various materials including aluminum, copper, iron, stainless steel, and carbon steel. Featuring an intuitive LCD screen and a 360° rotary switch for automatic parameter matching, this inverter welder offers ease of use and stable performance.
Figure 1: ANDELI MIG-270P PRO Welding Machine and Included Accessories
Video 1: Product demonstration highlighting key features and welding capabilities.
2. Safety Information
Always prioritize safety when operating welding equipment. Read and understand all safety warnings and instructions before use. Wear appropriate personal protective equipment (PPE) including welding helmet, gloves, and protective clothing. Ensure proper ventilation in the work area.
- VRD Anti-shock Mode: This feature helps protect against electric shock, enhancing user safety during MMA welding.
- Overload Protection: The machine is equipped with overload protection to prevent damage from excessive current.
- Over Temperature Protection: Built-in protection against overheating ensures the longevity of the machine.
- Over Current Warning: Provides alerts for current exceeding safe operating limits.
3. Setup
Before operating the welding machine, ensure all connections are secure and correct for the desired welding process.
3.1 Connecting Welding Accessories
Refer to the diagram below for proper connection of welding accessories based on the welding function.
Figure 2: Installation diagrams for AI Welding, Spool Gun, MIG/MAG, LIFT TIG, Flux MIG, and MMA.
- AI Welding: Connect the AI Welding Torch and Ground Clamp.
- Spool Gun: Connect the Spool Gun and Ground Clamp.
- MIG/MAG: Connect the MIG Torch and Ground Clamp.
- LIFT TIG: Connect the LIFT TIG Torch and Ground Clamp.
- Flux MIG: Connect the MIG Torch and Ground Clamp.
- MMA: Connect the MMA Holder and Ground Clamp.
3.2 Wire Feeding
The machine features a perfect wire feeding function compatible with 0.8-1.0mm welding wire. It supports 5KG welding wire spools.
Figure 3: MIG Spool Gun connection. Note: The MIG spool gun can be configured separately. If necessary, please contact customer service.
4. Operating Instructions
The MIG-270P PRO features an intuitive LCD screen and a simple control panel for easy operation.
Figure 4: LCD Screen and Panel Description
4.1 Mode Selection
Use the 'MODE SELECT' button and the rotary knobs to navigate and select your desired welding mode:
- DC MIG: Direct Current Metal Inert Gas welding.
- Pulse MIG: Pulsed Metal Inert Gas welding.
- Double Pulse MIG: Double Pulsed Metal Inert Gas welding.
- MMA: Manual Metal Arc welding (Stick welding).
- LIFT TIG: Lift Tungsten Inert Gas welding.
4.2 Parameter Adjustment
The machine features a 360° rotary switch for automatic parameter matching, simplifying the setup process. Adjust parameters such as voltage, current, hot-start, and force using the L-KNOB and R-KNOB.
Figure 5: LCD Screen showing DC MIG, Pulse MIG, Double Pulse MIG, LIFT TIG, and MMA modes with adjustable parameters.
Specific Mode Settings:
Figure 6: Detailed parameter settings for various welding modes.
- DC MIG (5 Modes):
- Synergy: Steel 100% CO2
- Synergy: Steel 25% CO2
- Manual Regulation: Constant Voltage
- Synergy: Flux-cored
- Manual Regulation: Spool Gun
- Pulse MIG / Double Pulse MIG (6 Modes each):
- Steel 80% Ar + 20% CO2
- Stainless Steel 80% Ar + 20% CO2
- Stainless Steel 97.5% Ar + 2.5% CO2
- Cu-Si 100% Ar
- Al-Si 100% Ar
- Al-Mg 100% Ar
- MMA: Adjust Voltage, Current, Hot-start, Force, and activate/deactivate VRD Anti-shock Mode.
- LIFT TIG: Adjust Voltage and Current.
4.3 Welding Applications
The MIG-270P PRO is suitable for welding a variety of materials:
Figure 7: Suitable materials for welding with the MIG-270P PRO.
Examples of welding effects for different modes and materials:
Figure 8: Various welding effects achieved with the machine.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Keep the machine clean and free from dust and debris. Use compressed air to clear ventilation openings regularly.
- Connections: Periodically check all electrical connections and welding cable connections for tightness and wear. Replace any damaged cables or connectors immediately.
- Ventilation: Ensure the forced air cooling duct is unobstructed to allow for proper heat dissipation. Good ventilation is crucial for stable power output and preventing overheating.
- Storage: Store the welding machine in a dry, clean environment when not in use.
6. Troubleshooting
The MIG-270P PRO is designed with several protective features to indicate and prevent common issues:
- Overload Protection: If the machine is overloaded, it will activate protection to prevent damage. Reduce the welding current or duty cycle if this occurs.
- Over Temperature Protection: If the internal temperature exceeds safe limits, the machine will shut down or reduce output. Allow the machine to cool down in a well-ventilated area. Ensure cooling vents are clear.
- Over Current Warning: An alert will be displayed if the welding current is too high. Adjust the current settings according to the material and wire diameter.
If you encounter persistent issues not covered here, please contact customer support.
7. Specifications
Figure 9: Physical dimensions of the MIG-270P PRO.
Figure 10: Technical parameters of the MIG-270P PRO.
| Parameter | Value |
|---|---|
| Brand Name | ANDELI |
| Model Number | MIG-270P PRO |
| Dimensions | 488*215*310mm |
| Weight | 12.1KG |
| Certification | CE |
| Origin | Mainland China |
| Plug Type | EU Plug |
| Power Supply Voltage | AC 220V ± 15% |
| Functions | MIG, LIFT TIG, MMA |
| MIG Input Current | 39A |
| LIFT TIG Input Current | 29A |
| MMA Input Current | 40A |
| MIG Welding Current Range | 30-200A |
| LIFT TIG Welding Current Range | 15-200A |
| MMA Welding Current Range | 15-200A |
| MIG Rated Output Voltage | 16.5/24V |
| LIFT TIG Rated Output Voltage | 10.4/18V |
| MMA Rated Output Voltage | 20.4/27.2V |
| Power Factor (MIG/LIFT TIG/MMA) | 0.75 / 0.73 / 0.77 |
| Duty Cycle (30% 200A) | 40°C 10min |
| Duty Cycle (60% 141A) | 40°C 10min |
| Duty Cycle (100% 110A) | 40°C 10min |
| No-Load Voltage | 64V |
| Load Duration | 30% |
| Efficiency | 77% |
| Wire Diameter | 0.8/1.0mm |
| Insulation Class | H |
| Protection Class | IP21S |
8. User Tips
- Leverage Intelligent Adjustment: The 360° rotary switch and intelligent adjustment features are designed to simplify parameter setting. Experiment with these to find optimal settings for different materials and thicknesses.
- Understand Welding Modes: Familiarize yourself with the distinct characteristics of DC MIG, Pulse MIG, Double Pulse MIG, MMA, and LIFT TIG to choose the most effective mode for your project.
- Aluminum Welding: The machine is specifically highlighted for aluminum welding. Ensure you use appropriate shielding gas (e.g., 100% Argon for Al-Si and Al-Mg) and wire for best results.
- Consult the Manual: If you have questions about specific operations or settings, refer back to this manual or contact customer support.
9. Warranty and Support
ANDELI is committed to providing quality products and excellent customer service.
Figure 11: ANDELI's commitment to quality and service.
- Quality Assurance: All ANDELI products are 100% original and undergo testing before delivery to ensure quality.
- Customer Service: For any questions or assistance, please contact ANDELI customer service. They are available to provide pre-sales and after-sales support.