1. Introduction
Thank you for choosing the Mudiro M-5S Evo-H 8KW Diesel Heater. This all-in-one portable diesel air heater is designed to provide efficient and reliable heating for a variety of environments, including RVs, campers, tents, cabins, garages, and vehicles. Featuring advanced safety mechanisms like CO protection with auto shut-off, automatic altitude compensation, and multiple control options, your Mudiro heater ensures comfort and peace of mind in cold conditions. Please read this manual thoroughly before operation to ensure safe and optimal performance.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in fire, explosion, electric shock, or carbon monoxide poisoning, which could cause property damage, personal injury, or death.
- Carbon Monoxide (CO) Protection: This heater is equipped with a built-in CO sensor that will trigger an alarm and automatically shut down the unit if unsafe CO levels are detected. Do not disable this feature. Regularly check the CO alarm threshold settings on the TFT display.
- Ventilation: Always ensure adequate ventilation when operating the heater, especially in enclosed spaces. The exhaust pipe must be routed safely to the outside to prevent exhaust fumes from entering the heated area.
- Fuel: Use only diesel fuel. Do not use gasoline, kerosene, or other flammable liquids. Ensure the fuel cap is securely closed to prevent leaks and odors.
- Placement: Place the heater on a stable, non-flammable surface. Maintain a safe distance from combustible materials (e.g., tents, bedding, curtains).
- Electrical Connection: Ensure the power supply (12V, 24V, or 240V AC adapter) matches the heater's requirements. Use only the provided adapter and ensure connections are secure and grounded.
- Children and Pets: Keep children and pets away from the heater during operation.
- Maintenance: Do not attempt to repair or modify the heater yourself. Refer all servicing to qualified personnel.

Figure 2.1: Professional Grade CO Protection details, showing dangerous CO levels and auto-shutoff functionality.
3. Package Contents
Carefully unpack your Mudiro M-5S Evo-H Diesel Heater and verify that all items listed below are included and undamaged. If any items are missing or damaged, please contact customer support.
- 1x Mudiro M-5S Evo-H Diesel Heater
- 1x Remote Control
- 1x TFT Switch (Control Panel)
- 1x AC Adapter (for 240V operation)
- 1x Intake Pipe
- 1x Exhaust Pipe
- 1x Air Outlet Pipe
- 1x Muffler
- 1x Air Filter
- 1x Diesel Strainer
- 1x Set of Installation Parts (clamps, screws, etc.)
- 1x User Manual (this document)
- 1x TFT Switch Extension Cord
- 3x Direct Links (for multi-zone heating)

Figure 3.1: Visual representation of the Mudiro M-5S Evo-H Diesel Heater and its included accessories.
4. Product Overview
The Mudiro M-5S Evo-H is an all-in-one diesel heater featuring a robust design and intelligent controls. Its compact form factor makes it highly portable, while its powerful 8KW output ensures effective heating.

Figure 4.1: Mudiro M-5S Evo-H Diesel Heater and its main components.
4.1 Key Features
- CO Protection: Auto shut-off and customizable alarm for enhanced safety.
- Altitude Mode: Real-time auto-adjustment for stable heat up to 5500m (18,045 ft).
- Temperature Control: High-precision control (±2°F/1-2°C) with smart auto start/stop.
- Multi-Voltage Support: Compatible with 12V, 24V, and 240V power sources.
- Triple Control System: LCD panel, remote control, and Bluetooth app for convenience.
- Ultra-Quiet Operation: Upgraded noise-reducing fuel pump for minimal disturbance.
- Timer Function: Program heating schedules.
- Leak-proof Fuel Cap: Prevents spills and odors.
- Retractable PVC Handle: For easy portability.
- Grounded Outlet & DC Power Terminals: Secure power connections.

Figure 4.2: Close-up views of the heater's handle, fuel cap, and power terminals.
4.2 Smart LCD Switch Overview
The TFT LCD switch provides comprehensive control and real-time information about your heater's operation.

Figure 4.3: Smart LCD Switch layout and functions.
- Power Button
- Confirm Button
- Adjust Up Button
- Adjust Down Button
- Remote Control Pairing Status Indicator
- Bluetooth Connection Status Indicator
- Auto Start/Stop Function Indicator
- Voice Broadcast Indicator
- Power Supply Voltage Display
- Real-time Altitude Display
- CO Alarm Time and CO Level Display
- CO Alarm On/Off
- Language Indicator
- 10 Gear Temperature Setting
- Temperature Control Mode Display
- Case Temperature or Set Temperature Display
- Temperature Unit
5. Setup Instructions
Proper setup is crucial for the safe and efficient operation of your diesel heater. Refer to the included 'User Manual' for detailed diagrams and step-by-step instructions, or scan the QR code provided in the packaging for a video guide.
5.1 Fueling the Heater
- Ensure the heater is turned off and cool.
- Unscrew the leak-proof fuel cap.
- Carefully pour clean diesel fuel into the tank. Use the provided diesel strainer to prevent impurities from entering the system.
- Do not overfill. The fuel level indicator on the side of the heater shows the current fuel volume.
- Securely fasten the fuel cap.
5.2 Exhaust and Intake Installation
- Connect the intake pipe to the designated port on the heater.
- Connect the exhaust pipe to the exhaust port. Ensure the muffler is installed on the exhaust pipe to reduce noise.
- Route the exhaust pipe safely to the outside of the heated area. It must be free from obstructions and away from windows or vents. The heater supports a 90mm wide exhaust pipe for efficient venting.
- Attach the air filter to the intake pipe to prevent dust and debris from entering the heater.

Figure 5.1: Example setup showing the exhaust pipe routed outdoors and the control panel connected via extension cable.
5.3 Power Connection
The Mudiro heater supports 12V, 24V, and 240V power inputs.
- For 12V/24V DC: Connect directly to a compatible 12V or 24V power source using the DC Power Terminals on the heater. Ensure correct polarity.
- For 240V AC: Use the provided AC adapter. Plug the adapter into a standard household outlet and connect its output to the heater's input port. Ensure the outlet is grounded.
5.4 Control Panel Connection
Connect the TFT Switch (control panel) to the heater. An extension cord is provided for flexible placement of the control panel.
6. Operating Instructions
6.1 Powering On/Off
- Press the Power Button (1) on the TFT Switch to turn the heater on. The display will illuminate.
- To turn off, press and hold the Power Button (1) until the heater initiates its cool-down cycle. Do not disconnect power until the cool-down cycle is complete.
6.2 Setting Temperature
- Use the Adjust Up (3) and Adjust Down (4) buttons to set your desired temperature. The adjustable range is 46.4°F-96.8°F (8°C-36°C).
- The heater features a wireless temperature sensor for precise control (±2°F precision) and will automatically start/stop to maintain the set temperature.
- Press the Confirm Button (2) to confirm the temperature setting.

Figure 6.1: High-precision temperature control performance.
6.3 Altitude Mode
The Mudiro heater automatically compensates for altitude changes up to 5500m (18,045 ft). The real-time altitude is displayed on the TFT (10). No manual adjustment is required.

Figure 6.2: Automatic altitude compensation in action.
6.4 CO Protection Settings
The CO protection system is active by default. You can view the CO alarm time and level display (11) and toggle the CO Alarm On/Off (12) via the TFT Switch. It is highly recommended to keep this feature enabled.
6.5 Remote Control Operation
The included remote control is pre-paired and has a range of up to 98 ft. Use it to power on/off, adjust temperature, and access other basic functions. The Remote Control Pairing Status Indicator (5) on the TFT will show its connection status.
6.6 Bluetooth App Control
Download the Mudiro app on your smartphone. The Bluetooth Connection Status Indicator (6) on the TFT will show if the heater is connected. The app allows for comprehensive control, including temperature adjustment, timer settings, and monitoring, from up to 98 ft away.
6.7 Timer Function
The heater supports setting up to 3 groups of timers for automatic power on/off. Access this feature through the TFT Switch or the Bluetooth app to schedule your heating needs.

Figure 6.3: Timer function for scheduled heating.
7. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Mudiro diesel heater.
- Cleaning: Periodically wipe down the exterior of the heater with a damp cloth. Do not use abrasive cleaners or solvents.
- Air Filter: Check and clean the air filter regularly. A clogged filter can reduce efficiency and potentially cause overheating. Replace if damaged.
- Diesel Strainer: Inspect the diesel strainer for debris. Clean or replace as necessary to ensure clean fuel flow.
- Exhaust System: Ensure the exhaust pipe and muffler are free from blockages and damage.
- Storage: When storing the heater for extended periods, ensure the fuel tank is empty and the unit is clean and dry. Store in a cool, dry place.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on | No power, low fuel, faulty connection | Check power supply and connections. Ensure sufficient fuel in the tank. |
| Heater shuts off unexpectedly | CO alarm triggered, overheating, low fuel, power interruption | Check CO levels and ventilation. Ensure proper airflow. Refuel if necessary. Check power. |
| Insufficient heat output | Clogged air filter, incorrect temperature setting, low fuel quality | Clean/replace air filter. Adjust temperature setting. Use clean diesel fuel. |
| Excessive smoke/odor | Poor combustion, exhaust blockage, low fuel quality | Check exhaust for blockages. Use clean diesel. Contact support if problem persists. |
| Remote control/Bluetooth app not working | Out of range, battery low (remote), app not connected | Ensure within 98ft range. Replace remote batteries. Re-pair remote or reconnect app. |
| CO alarm sounds frequently | High CO levels, sensor malfunction | Immediately ventilate the area. Check exhaust routing. If CO levels are safe, sensor may need calibration or replacement. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand | MUDIRO |
| Model | M-5S Evo-H |
| Power | 8KW |
| Applicable Voltage | 12V/24V/240V |
| AC Adapter | Equipped |
| Fuel Tank Capacity | 3.5L |
| Fuel Consumption | 0.12-0.36L/h |
| Color | Orange (as shown in main product images) |
| Applicable Area | 215-289 ft² / 20-27 m² |
| Adjustable Temperature Range | 46.4°F-96.8°F / 8°C-36°C |
| Operating Temperature Range | -40°F-104°F / -40°C-40°C |
| TFT Panel Control | Support |
| Remote Control | Support, 98ft range |
| Bluetooth App Control | Support, 98ft range |
| Altitude Adaptive | Altitude sensor, real-time display, automatic adjustment |
| Maximum Altitude | 5500m / 18045 ft |
| Timer | Support, 3 groups can be set |
| CO Protection | Support, Custom Alarm Response Time & CO Alarm Threshold (PPM), Auto Shut-off |
| Wireless Temperature Sensor | Auto Start/Stop with ±2°F precision |
| Voice Broadcast | Support |
| Overheat Protection | Support |
| Thermostat | Yes |
| Silencer | Yes |
| Quiet Fuel Pump | Yes |
| Noise Level | 50-55dB |
| Item Weight | 11kg |
| Item Height | 27cm |
| Item Width | 25cm |
| Item Length | 38cm |
| External Testing Certification | CE |
| Certification | RoHS, CE |
| Origin | Mainland China |
10. User Tips
- Bluetooth Activation: If you encounter issues with Bluetooth connectivity, ensure the heater is powered on and within the 98ft range. Refer to the 'Operating Instructions' section for detailed steps on activating and connecting via the app.
- Optimal Placement: For best heating performance and safety, position the heater in a central location within the area to be heated, ensuring the exhaust is properly vented outside.
- Fuel Quality: Always use high-quality, clean diesel fuel. This prevents clogging of the fuel system and ensures efficient combustion. The included diesel strainer helps, but starting with clean fuel is best.
- Pre-heating: In extremely cold conditions, allowing the heater to run for a few minutes on a lower setting before increasing to the desired temperature can help optimize performance.
11. Warranty and Support
Your Mudiro M-5S Evo-H Diesel Heater comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the seller directly. If you experience any issues or have questions regarding your heater, please reach out to Mudiro customer support for assistance.