1. Introduction
The Hirisi S4 Wireless Carp Fishing Alarm Set is designed to enhance your carp angling experience with advanced bite indication and anti-theft features. This set includes four wireless bite alarms and one receiver, providing reliable alerts for bites and ensuring the security of your fishing rods. This manual will guide you through the setup, operation, and maintenance of your new fishing alarm system.

Figure 1: Hirisi Wireless Carp Fishing Alarm Set in use.
2. Package Contents
Please verify that all items listed below are included in your package:
- 4 x Wireless Bite Alarms
- 1 x Wireless Receiver
- 1 x Protective Carrying Case
Note: Each alarm and the receiver require one 9V battery, which is not included and must be purchased separately.

Figure 2: The complete Hirisi S4 set in its carrying case.

Figure 3: All components of the Hirisi S4 Wireless Carp Fishing Alarm Set.
3. Specifications
| Feature | Description |
|---|---|
| Material | ABS |
| Type | Fish Bell/Alarm |
| Power Source | 1x 9V battery per unit (not included) |
| Volume Adjustment | 6 levels |
| Tone Adjustment | 6 levels |
| Sensitivity Adjustment | 6 levels |
| LED Lighting | Freely adjustable 6-color LED lighting |
| Additional Features | Anti-theft sensor, Night light function, 2.5mm auxiliary jack |
| Package Weight | 0.92 kg |
| Package Dimensions | 35cm x 20cm x 9cm (L x W x H) |
4. Setup Guide
4.1 Battery Installation
- Locate the battery compartment on the back of each bite alarm and the receiver.
- Open the compartment cover.
- Insert one 9V battery into each unit, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
4.2 Mounting Alarms
Securely attach each bite alarm to your fishing rod pod or bank stick using the threaded screw at the bottom of the alarm. Ensure the central roller wheel is positioned to allow the fishing line to pass freely and smoothly.

Figure 4: Alarms mounted on fishing rods.
4.3 Powering On
- Alarms: Rotate the power switch (located at the bottom of the alarm) to the left for ON, or to the right for ON with Night Light function.
- Receiver: Turn the rotary control knob on the receiver clockwise to power it ON and adjust the initial volume.

Figure 5: Power switch details on the alarm unit.
4.4 Pairing Alarms with Receiver
To ensure your alarms communicate with the receiver, follow these pairing steps:
- Ensure both the alarm and receiver are powered on.
- On the receiver, press and hold the 'Transmitter Pairing' button (typically for 3 seconds) until the receiver's LED lights begin to flash.
- Activate the alarm you wish to pair (e.g., by rolling the central wheel with your finger or simulating a bite).
- The receiver's corresponding channel LED will light up and stop flashing, indicating successful pairing.
- Repeat steps 2-4 for all four alarms, assigning each to a specific LED color on the receiver for easy identification.

Figure 6: Detailed features of the alarm and receiver, including pairing controls.
5. Operation
5.1 Adjusting Settings on Alarms
Each alarm unit features several adjustable dials:
- Volume Adjustment (V): Use the 'V' selector knob to adjust the sound volume of the alarm (6 levels).
- Tone Adjustment (T): Use the 'T' selector knob to change the tone of the alert sound (6 levels).
- Sensitivity Adjustment (S): Use the 'S' selector knob to set the sensitivity (6 levels). Higher sensitivity detects lighter bites, while lower sensitivity helps prevent false alarms from wind or water movement.
- Alarm Light Color Adjustment (C): Use the 'C' selector knob to choose from 6 different LED colors for the alarm light.

Figure 7: Alarm unit with V, T, S adjustment dials.

Figure 8: Close-up of alarm dials on a rod.

Figure 9: Freely adjustable 6-color lighting options.
5.2 Bite Indication
When a fish takes the bait and pulls the fishing line, the central roller wheel on the alarm will rotate, triggering an audible and visual alert from the alarm unit. Simultaneously, the receiver will provide a corresponding LED light indication and a strong vibration alert, notifying you of the bite.

Figure 10: Central roller wheel for bite detection.
5.3 Anti-Theft Function
To activate or deactivate the anti-theft mode, long-press the mute button on the alarm for approximately 3 seconds. When active, if a fishing rod is lifted from the alarm, it will trigger an alert on both the alarm and the receiver, providing an extra layer of security for your equipment.

Figure 11: Anti-Theft Sensor Device.

Figure 12: One-Key Mute button and anti-theft toggle.
5.4 Night Light Function
To activate the night light, rotate the power switch on the alarm to the right. The 6 blue LEDs will illuminate, providing visibility in low-light conditions.
5.5 Auxiliary Jack
The 2.5mm auxiliary jack on the alarm allows for the connection of additional devices, such as illuminated bite indicators or other compatible accessories.
6. Maintenance
6.1 Battery Replacement
When the alarm or receiver's performance degrades (e.g., dim lights, weak sound, or inconsistent alerts), it's time to replace the 9V battery. Always use fresh, high-quality batteries for optimal performance.
6.2 Cleaning
Wipe the units with a soft, damp cloth after each use to remove dirt, dust, and moisture. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the housing and electronic components. Ensure all units are completely dry before storage.
6.3 Storage
Store the Hirisi Wireless Carp Fishing Alarm Set in its protective carrying case when not in use. Keep it in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods (e.g., several months), it is recommended to remove the batteries from all units to prevent potential leakage and damage.
6.4 Water Resistance
While designed for outdoor fishing environments, the units are not fully submersible. Avoid prolonged exposure to heavy rain or submerging the units in water to prevent damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm/Receiver has no sound or light. | Unit is off, batteries are depleted or incorrectly installed. | Ensure unit is powered on. Check and replace 9V batteries. Verify correct polarity. Adjust volume/tone settings. |
| Alarm not triggering on a bite. | Sensitivity too low, line not on roller, roller obstructed. | Increase sensitivity setting (S dial). Ensure fishing line is correctly positioned on the central roller wheel. Clean the roller wheel if obstructed. |
| Receiver not responding to alarms. | Receiver off, battery low, units unpaired, excessive distance/obstruction. | Ensure receiver is powered on and battery is charged. Re-pair alarms with the receiver (see Section 4.4). Reduce distance between units or clear obstructions. |
| Anti-theft function not working. | Anti-theft mode not activated, alarm not securely mounted. | Long-press the mute button for 3 seconds to activate anti-theft mode. Ensure the alarm is securely mounted and the rod is properly seated. |
8. User Tips
- Always carry spare 9V batteries, especially for longer fishing trips, as they are not included with the set and are crucial for uninterrupted use.
- The anti-theft feature provides valuable peace of mind, particularly when fishing multiple rods or in busy areas. Remember to activate it when needed.
- Experiment with the 6-level sensitivity settings to match different fishing conditions, water currents, and target species. This will help optimize bite detection and minimize false alarms.
- Utilize the multi-color LED lighting on the alarms to easily distinguish between different rods, especially during night fishing.
9. Warranty and Support
For any issues, questions, or technical support regarding your Hirisi Wireless Carp Fishing Alarm Set, please contact the seller or manufacturer's customer support directly. Keep your purchase receipt or proof of purchase, as it may be required for warranty claims or service.