KF PLAN KF17

KF PLAN KF17 1/12 4WD Brushless RC Car Instruction Manual

Model: KF17

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your KF PLAN KF17 remote control vehicle.

1. Safety Information

WARNING: Not suitable for children under 36 months due to small parts. Recommended age for operation is 14+ years.

  • Always operate the RC car in open areas, away from people, pets, and obstacles.
  • Do not operate near water or in wet conditions unless explicitly stated as waterproof. This model is splashproof, but not submersible.
  • Ensure batteries are charged correctly and handled with care. Lithium batteries can be dangerous if misused.
  • Always turn off the vehicle and transmitter when not in use.
  • Keep fingers, hair, and loose clothing away from moving parts.

2. Package Contents

Before starting, please verify all components are present in your package:

KF17 RC Car package contents with one battery
Figure 2.1: Package contents (One Battery version). Includes the KF17 RC car, remote control, one 11.1V 2200mAh LiPo battery, fast charging box, instruction manual, car body stickers, carcase clips, hex socket screwdrivers (x2), and a wrench.
KF17 RC Car package contents with two batteries
Figure 2.2: Package contents (Two Batteries version). Similar to Figure 2.1 but includes two 11.1V 2200mAh LiPo batteries.
  • KF PLAN KF17 1/12 4WD Brushless RC Car
  • FL Y SKY FS-G4P 4CH 2.4G Remote Control Transmitter
  • 11.1V 2200mAh LiPo Battery (Quantity: 1 or 2, depending on purchase)
  • Fast Charging Box (USB charger with overcharge protection)
  • Instruction Manual
  • Car Body Stickers
  • Carcase Clips
  • Hex Socket Screwdrivers (x2)
  • Wrench

3. Setup Guide

3.1 Charging the Car Battery

The KF17 uses an 11.1V 2200mAh LiPo battery. Use the provided fast charging box for optimal performance and safety.

Optional high current balanced fast charger
Figure 3.1: The optional high current balanced fast charger. Features include balance (±4.2V), durability, temperature protection, overshoot protection, double-sided PCB, and fast charging at 2.5A. The red light indicates power, and the green light indicates charging status.
  1. Connect the fast charging box to a suitable USB power source.
  2. Connect the LiPo battery to the charging box.
  3. The charging box features overcharge protection. A full charge typically takes approximately 150 minutes.
  4. Do not leave batteries unattended while charging.

3.2 Installing Batteries in the Remote Control

The FL Y SKY FS-G4P remote control requires 2xAA batteries (not included).

FLY SKY FS-G4P Four-way remote control diagram
Figure 3.2: Diagram of the FLY SKY FS-G4P remote control, showing the battery compartment at the bottom.
  1. Locate the battery compartment on the bottom of the remote control.
  2. Open the battery compartment cover.
  3. Insert 2xAA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.

3.3 Installing the Car Battery

  1. Remove the car body shell using the carcase clips.
  2. Locate the battery compartment within the chassis.
  3. Connect the fully charged LiPo battery to the ESC (Electronic Speed Controller) connector.
  4. Secure the battery in its compartment.
  5. Reattach the car body shell.

3.4 Applying Car Body Stickers

Use the provided car body stickers to customize the appearance of your KF17 RC car. Refer to the guidance image for suggested placement.

Vehicle sticker location guidance
Figure 3.3: Vehicle sticker location guidance, showing placement for cab, front, and rear stickers.

4. Operating Instructions

4.1 Powering On and Pairing

  1. Turn on the remote control transmitter.
  2. Turn on the RC car.
  3. The car and transmitter should automatically pair. If not, consult the specific pairing instructions in the included manual.

4.2 Basic Controls (FL Y SKY FS-G4P Transmitter)

KF17 RC Car with remote control
Figure 4.1: The KF17 RC Car alongside its remote control.
  • Steering Wheel: Controls left and right turns.
  • Throttle Lever: Controls forward, backward, and braking.
  • Reserved Buttons: For advanced functions or future upgrades.

4.3 Driving the KF17

The KF17 is a high-speed, full proportional vehicle designed for off-road racing. It features a 4WD system and anti-skid, wear-resistant rubber tires for excellent grip on various surfaces.

KF17 RC Car on different terrains
Figure 4.2: The KF17 RC Car is suitable for various road conditions including sandy, grassland, mud, and highway.
Anti-skid and wear-resistant rubber tires
Figure 4.3: Close-up of the anti-skid and wear-resistant rubber tires, designed for all-terrain performance.
  • Acceleration/Deceleration: Push the throttle lever forward for acceleration, pull it back for braking, and further back for reverse.
  • Turning: Rotate the steering wheel left or right to steer the vehicle.
  • Proportional Control: The throttle and steering are fully proportional, allowing for precise control over speed and direction.
  • LED Headlights: The car is equipped with high-brightness LED headlights for improved visibility.

4.4 Advanced Control Features

  • Adjustable Forward/Backward Ratio: Fine-tune the power distribution for forward and reverse.
  • Direction Fine-tuning Correction: Adjust the steering trim to ensure the car drives straight.
  • Fixed Speed Fine-tuning: Set a consistent speed for specific driving conditions.
  • Steering Angle Setting: Adjust the maximum steering angle for different handling characteristics.

5. Maintenance

5.1 General Care

  • After each use, clean the car to remove dirt, dust, and debris. Use a soft brush or cloth.
  • Avoid exposing the car to extreme temperatures or direct sunlight for prolonged periods.
  • Store the car in a dry, cool place.

5.2 Battery Care

  • Always disconnect the battery from the car when not in use.
  • Store LiPo batteries in a fire-safe bag or container.
  • Do not overcharge or over-discharge LiPo batteries.
  • If the battery swells, discontinue use immediately and dispose of it safely.

5.3 Component Inspection

Regularly inspect the following components for wear or damage:

  • Tires: Check for cuts, cracks, or excessive wear.
  • Shock Absorbers: Ensure metal oil shock absorbers and spring travel adjustable aluminum ring shock absorbers are functioning smoothly.
  • Gears: Inspect powder metallurgy metal gears and the central sealed differential for wear.
  • Bearings: The full vehicle uses ball bearings; ensure they are clean and free-spinning.
  • Steering Servo: Check the 3.35KG metal servo for proper response and movement.
  • Chassis: Inspect the aluminum alloy bottom plate and PC material body for damage.
  • Transmission Components: Verify all metal transmission components are intact and secure.
  • Anti-Roll Bars: Ensure front and rear anti-roll bars are not bent or broken.
Full metal gear hydraulic differential and 3.35KG standard servo
Figure 5.1: Close-up view of the full metal gear hydraulic differential and 3.35KG standard servo, critical components for performance and durability.
Metal hydraulic shock absorber
Figure 5.2: Detail of a metal hydraulic shock absorber, providing smooth damping.

6. Troubleshooting

  • Car not responding: Ensure both the car and transmitter are powered on and batteries are charged. Re-pair if necessary.
  • Loss of control/short range: Check transmitter batteries. Ensure no strong interference sources are nearby.
  • Car drives crooked: Use the direction fine-tuning correction on the transmitter to adjust the steering trim.
  • Low power/slow speed: Recharge the car battery. Check for any obstructions in the drivetrain.
  • Anti-stuck protection: If the car gets stuck, the system may engage anti-stuck protection. Clear the obstruction and resume operation.
  • Low voltage protection: The car will automatically reduce power or stop when the battery voltage is too low to prevent damage. Recharge the battery.

7. Specifications

FeatureDetail
Product NameFull scale 4WD high speed off-road vehicle
BrandKF PLAN
ModelKF17
Scale1:12
Speed60km/h (with 2S battery), 70km/h+ (with 3S battery)
MotorSurpass hobby brushless 2845 3800KV
ESCHobbywing 45A (Supports 2-3S lithium battery)
Steering Servo3.35KG metal servo
TransmitterFL Y SKY FS-G4P 4CH, 2.4G Frequency, Fully proportional synchronous control system (gun control)
Transmitter Battery2xAA battery (not included)
Car Battery11.1V 2200mAh LiPo (compatible with 2S or 3S lithium battery)
Charge TimeApprox. 150 minutes (with optional charger)
Using Time15-20 minutes
Control Distance200-300 meters
Dimensions (Car)40.5 x 22.3 x 16.3 cm
Dimensions (Package)50.5 x 23.5 x 17.1 cm
Weight (Car)Approx. 1.5 kg
Waterproof FunctionSplashproof
Drive4WD
Car Light ConfigurationLED headlights
ChassisLightweight carbon fiber chassis, aluminum alloy bottom plate
DifferentialCentral sealed differential (all metal)
Shock AbsorbersMetal oil shock absorber, spring travel adjustable aluminum ring shock absorber
TiresAnti-skid and wear-resistant rubber tires
Dimensions diagram of the 1:12 large size body and package
Figure 7.1: Detailed dimensions of the KF17 RC Car body and its packaging.
Chassis structure analysis with components
Figure 7.2: Chassis structure analysis, highlighting key components such as the 2845 Brushless Motor, Hobbywing 45A ESC, 3.35KG standard servo, full metal gear hydraulic differential, power battery, and metal hydraulic shock absorbers.

8. User Tips

  • Battery Upgrade: The 2/3S series is designed for entry-level brushless users. Start with a 2S battery for initial experience, and upgrade to a 3S battery to unleash the full potential and achieve speeds of 70km/h+.
  • Terrain Versatility: Don't hesitate to explore different terrains. The KF17's robust design and anti-skid tires are built for sandy, grassland, mud, and highway conditions.
  • Proportional Control Mastery: Practice with the proportional throttle and steering to gain precise control, especially at high speeds. Small adjustments can make a big difference.
  • Regular Checks: A quick visual inspection of the tires, shocks, and chassis before and after each run can prevent minor issues from becoming major problems.

9. Warranty and Support

For any issues, questions, or support needs regarding your KF PLAN KF17 RC Car, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

© 2024 KF PLAN. All rights reserved.

Related Documents - KF17

Preview FMS 1/10 Ford F100 Brushless Version Instruction Manual
Comprehensive instruction manual for the FMS 1/10 Ford F100 Brushless RC monster truck, covering safety, transmitter operation, ESC programming, and maintenance.
Preview Shahe Digital Push-Pull Dynamometer User Manual (KF Series)
Comprehensive user manual for the Shahe Digital Push-Pull Dynamometer (KF-2 to KF-500). Includes specifications, setup instructions, calibration, safety precautions, and troubleshooting.
Preview ROCHOBBY 1:10 Atlas 4x4 Instruction Manual - RC Off-Road Truck Guide
Comprehensive instruction manual for the ROCHOBBY 1:10 Atlas 4x4 remote control off-road truck. Includes setup, operation, troubleshooting, and parts list for this hobby-grade RC vehicle.
Preview SUPER SPORT RACING KF16/KF17 1:12 Scale RC Off-Road Car Operating Instructions
Comprehensive operating instructions and assembly guide for the SUPER SPORT RACING KF16/KF17 1:12 scale 4WD brushless off-road remote control car. Learn about setup, maintenance, troubleshooting, and parts.
Preview Flysky FS-HW-G4P & HW-709 Digital Proportional Radio Control System User Manual
User manual for the Flysky FS-HW-G4P transmitter and HW-709 receiver, a digital proportional radio control system for RC cars and boats. Covers setup, operation, safety, functions, and troubleshooting.
Preview Amoril 1/10 RTR Brushless RC Car Manual
Instruction manual for the Amoril 1/10 RTR brushless RC car, a high-speed electric off-road monster truck designed for adults. Features include 4WD, waterproof capabilities, and compatibility with 3S Lipo batteries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.